Lines Matching refs:above

443 debugger and adapter board. See the :ref:`above information
513   To boot the ZERO-RISCY core instead, replace ``ri5cy_boot`` above with
536 #. Run ``init`` and ``ri5cy_boot`` as shown above, with RESET held down.
540   To boot the ZERO-RISCY core instead, replace ``ri5cy_boot`` above with
553    and OpenOCD as described above in :ref:`rv32m1-toolchain-openocd`.
568    The above only sets these variables for your current shell session.
624 Make sure you've followed the above instructions to set up your board
632 the above section.
648 - On Linux, make sure udev rules are installed, as described above.
669 Make sure you've followed the above instructions to set up your board
707 - On Linux, make sure udev rules are installed, as described above.
749 Users of other Linux distributions need to install the above packages
766 :file:`~/riscv32-unknown-elf-gcc`, you can use the above instructions
789 in the above flash and debug instructions.