Lines Matching refs:ESP32

6 The Olimex ESP32-EVB is an OSHW certified, open-source IoT board based on the
7 Espressif ESP32-WROOM-32E/UE module. It has a wired 100Mbit/s Ethernet Interface,
18 - ESP32-WROOM-32E/UE module with 4MB flash.
31 - 40 pin GPIO connector with all ESP32 pins.
33 For more information about the ESP32-EVB and the ESP32-WROOM-32E/UE module, see
36 - `ESP32-EVB Website`_
37 - `ESP32-EVB Schematic`_
38 - `ESP32-EVB GitHub Repository`_
39 - `ESP32-WROOM32-E/UE Datasheet`_
139 bootstrap the board with the ESP32 SoC.
151 By default, the ESP32 sysbuild creates bootloader (MCUboot) and application
224 As with much custom hardware, the ESP32 modules require patches to
226 the project. The custom OpenOCD can be obtained at `OpenOCD ESP32`_.
253    https://www.olimex.com/Products/IoT/ESP32/ESP32-EVB/open-source-hardware
256    https://github.com/OLIMEX/ESP32-EVB/raw/master/HARDWARE/REV-I/ESP32-EVB_Rev_I.pdf
259    https://github.com/OLIMEX/ESP32-EVB
264 .. _OpenOCD ESP32: