Lines Matching +full:wakeup +full:- +full:line
7 of the LPC55S1x/LPC551x MCU family, based on the Arm® Cortex®-M33
16 - LPC55S16 Arm® Cortex®-M33 microcontroller running at up to 150 MHz
17 - 256 KB flash and 96 KB SRAM on-chip
18 - LPC-Link2 debug high speed USB probe with VCOM port
19 - I2C and SPI USB bridging to the LPC device via LPC-Link2 probe
20 - MikroElektronika Click expansion option
21 - LPCXpresso expansion connectors compatible with Arduino UNO
22 - PMod compatible expansion / host connector
23 - Reset, ISP, wake, and user buttons for easy testing of software functionality
24 - Tri-color LED
25 - Full-speed USB device / host port
26 - High-speed USB device / host port
27 - UART header for external serial to USB cable
28 - CAN Transceiver
29 - Stereo audio codec with in/out line
30 - NXP FXOS8700CQ accelerometer
34 - `LPC55S16 SoC Website`_
35 - `LPC55S16 Datasheet`_
36 - `LPC55S16 User Manual`_
37 - `LPCXpresso55S16 Website`_
38 - `LPCXpresso55S16 User Manual`_
39 - `LPCXpresso55S16 Development Board Design Files`_
49 already supported, which can also be re-used on this lpcxpresso55s16 board:
51 +-----------+------------+-------------------------------------+
54 | NVIC | on-chip | nested vector interrupt controller |
55 +-----------+------------+-------------------------------------+
56 | SYSTICK | on-chip | systick |
57 +-----------+------------+-------------------------------------+
58 | IOCON | on-chip | pinmux |
59 +-----------+------------+-------------------------------------+
60 | GPIO | on-chip | gpio |
61 +-----------+------------+-------------------------------------+
62 | I2C | on-chip | i2c |
63 +-----------+------------+-------------------------------------+
64 | SPI | on-chip | spi |
65 +-----------+------------+-------------------------------------+
66 | USART | on-chip | serial port-polling; |
67 | | | serial port-interrupt |
68 +-----------+------------+-------------------------------------+
69 | SENSOR | off-chip | fxos8700 trigger |
70 +-----------+------------+-------------------------------------+
71 | CLOCK | on-chip | clock_control |
72 +-----------+------------+-------------------------------------+
73 | CAN | on-chip | canbus |
74 +-----------+------------+-------------------------------------+
75 | RNG | on-chip | entropy; |
77 +-----------+------------+-------------------------------------+
78 | IAP | on-chip | flash programming |
79 +-----------+------------+-------------------------------------+
80 | COUNTER | on-chip | counter |
81 +-----------+------------+-------------------------------------+
87 - *lpcxpresso55s16*
95 +---------+-----------------+----------------------------+
99 +---------+-----------------+----------------------------+
101 +---------+-----------------+----------------------------+
103 +---------+-----------------+----------------------------+
105 +---------+-----------------+----------------------------+
107 +---------+-----------------+----------------------------+
109 +---------+-----------------+----------------------------+
111 +---------+-----------------+----------------------------+
113 +---------+-----------------+----------------------------+
115 +---------+-----------------+----------------------------+
117 +---------+-----------------+----------------------------+
119 +---------+-----------------+----------------------------+
120 | PIO1_18 | GPIO | Wakeup SW1 |
121 +---------+-----------------+----------------------------+
123 +---------+-----------------+----------------------------+
125 +---------+-----------------+----------------------------+
127 +---------+-----------------+----------------------------+
129 +---------+-----------------+----------------------------+
131 +---------+-----------------+----------------------------+
159 board is configured by default to use the LPC-Link2 CMSIS-DAP Onboard
160 Debug Probe, however the :ref:`pyocd-debug-host-tools` does not yet
162 J-Link debug probe instead.
164 First install the :ref:`jlink-debug-host-tools` and make sure they are
168 :ref:`lpclink2-jlink-onboard-debug-probe` to program the J-Link
179 - Speed: 115200
180 - Data: 8 bits
181 - Parity: None
182 - Stop bits: 1
187 Here is an example for the :zephyr:code-sample:`hello_world` application.
189 .. zephyr-app-commands::
190 :zephyr-app: samples/hello_world
197 .. code-block:: console
205 Here is an example for the :zephyr:code-sample:`hello_world` application.
207 .. zephyr-app-commands::
208 :zephyr-app: samples/hello_world
215 .. code-block:: console
217 ***** Booting Zephyr OS zephyr-v2.2.0 *****
221 …-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc5500-cortex-m33/lpc551x-s1x-bas…
224 https://www.nxp.com/docs/en/nxp/data-sheets/LPC55S1x_LPC551x_DS.pdf
230 …https://www.nxp.com/design/development-boards/lpcxpresso-boards/lpcxpresso55s16-development-board:…
236 https://www.nxp.com/webapp/Download?colCode=LPCXPRESSSO55S16-DESIGN-FILES