Lines Matching +full:flexcan +full:- +full:fd
6 FRDM-MCXA156 are compact and scalable development boards for rapid prototyping of
8 to the MCU's I/Os, integrated open-standard serial interfaces, external flash
9 memory and an on-board MCU-Link debugger. Additional tools like our Expansion
10 Board Hub for add-on boards and the Application Code Hub for software examples
16 - MCX-A156 Arm Cortex-M33 microcontroller running at 96 MHz
17 - 1MB dual-bank on chip Flash
18 - 128 KB RAM
19 - USB full-speed with on-chip FS PHY. USB Type-C connectors
20 - 1x FlexCAN with FD, 1x I3Cs
21 - On-board MCU-Link debugger with CMSIS-DAP
22 - Arduino Header, FlexIO/LCD Header, SmartDMA/Camera Header, mikroBUS
24 For more information about the MCX-A156 SoC and FRDM-MCXA156 board, see:
26 - `MCX-A156 SoC Website`_
27 - `MCX-A156 Datasheet`_
28 - `MCX-A156 Reference Manual`_
29 - `FRDM-MCXA156 Website`_
30 - `FRDM-MCXA156 User Guide`_
31 - `FRDM-MCXA156 Board User Manual`_
32 - `FRDM-MCXA156 Schematics`_
37 The FRDM-MCXA156 board configuration supports the following hardware features:
39 +-----------+------------+-------------------------------------+
42 | NVIC | on-chip | nested vector interrupt controller |
43 +-----------+------------+-------------------------------------+
44 | SYSTICK | on-chip | systick |
45 +-----------+------------+-------------------------------------+
46 | PINMUX | on-chip | pinmux |
47 +-----------+------------+-------------------------------------+
48 | GPIO | on-chip | gpio |
49 +-----------+------------+-------------------------------------+
50 | UART | on-chip | serial port-polling; |
51 | | | serial port-interrupt |
52 +-----------+------------+-------------------------------------+
53 | CLOCK | on-chip | clock_control |
54 +-----------+------------+-------------------------------------+
55 | FLASH | on-chip | soc flash |
56 +-----------+------------+-------------------------------------+
57 | ADC | on-chip | adc |
58 +-----------+------------+-------------------------------------+
59 | CTIMER | on-chip | counter |
60 +-----------+------------+-------------------------------------+
61 | DAC | on-chip | dac |
62 +-----------+------------+-------------------------------------+
63 | I2C | on-chip | i2c |
64 +-----------+------------+-------------------------------------+
65 | LPCMP | on-chip | sensor(comparator) |
66 +-----------+------------+-------------------------------------+
67 | LPTMR | on-chip | counter |
68 +-----------+------------+-------------------------------------+
69 | PWM | on-chip | pwm |
70 +-----------+------------+-------------------------------------+
71 | USB | on-chip | USB device |
72 +-----------+------------+-------------------------------------+
85 The MCX-A156 SoC has 5 gpio controllers and has pinmux registers which
88 +------------+-----------------+----------------------------+
92 +------------+-----------------+----------------------------+
94 +------------+-----------------+----------------------------+
99 The MCX-A156 SoC is configured to use FRO running at 96MHz as a source for
105 The FRDM-MCXA156 SoC has 5 LPUART interfaces for serial communication.
118 configured by default to use the MCU-Link CMSIS-DAP Onboard Debug Probe.
121 ----------------
124 default MCU-Link firmware. Follow the instructions in
125 :ref:`mcu-link-cmsis-onboard-debug-probe` to reprogram the default MCU-Link
130 Using J-Link
131 ------------
134 J-Link firmware by following the instructions in
135 :ref:`mcu-link-jlink-onboard-debug-probe`.
138 The second option is to attach a :ref:`jlink-external-debug-probe` to the
139 10-pin SWD connector (J24) of the board. Additionally, the jumper JP7 must
141 For both options use the ``-r jlink`` option with west to use the jlink runner.
143 .. code-block:: console
145 west flash -r jlink
153 - Speed: 115200
154 - Data: 8 bits
155 - Parity: None
156 - Stop bits: 1
161 Here is an example for the :zephyr:code-sample:`hello_world` application.
163 .. zephyr-app-commands::
164 :zephyr-app: samples/hello_world
171 .. code-block:: console
173 *** Booting Zephyr OS build v3.6.0-4478-ge6c3a42f5f52 ***
179 Here is an example for the :zephyr:code-sample:`hello_world` application.
181 .. zephyr-app-commands::
182 :zephyr-app: samples/hello_world
189 .. code-block:: console
191 *** Booting Zephyr OS build v3.6.0-4478-ge6c3a42f5f52 ***
197 .. include:: ../../common/segger-ecc-systemview.rst
198 :start-after: segger-ecc-systemview
200 .. _MCX-A156 SoC Website:
201 …-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/mcx-arm-cortex-m/mcx-a-series-micr…
203 .. _MCX-A156 Datasheet:
204 https://www.nxp.com/docs/en/data-sheet/MCXAP100M96FS6.pdf
206 .. _MCX-A156 Reference Manual:
209 .. _FRDM-MCXA156 Website:
210 …com/design/design-center/development-boards-and-designs/general-purpose-mcus/frdm-development-boar…
212 .. _FRDM-MCXA156 User Guide:
213 https://www.nxp.com/document/guide/getting-started-with-frdm-mcxa156:GS-FRDM-MCXA156
215 .. _FRDM-MCXA156 Board User Manual:
216 https://www.nxp.com/docs/en/user-manual/UM12121.pdf
218 .. _FRDM-MCXA156 Schematics:
219 https://www.nxp.com/webapp/Download?colCode=SPF-90841