Lines Matching full:kw41z

6 The FRDM-KW41Z is a development kit enabled by the Kinetis |reg| W series
7 KW41Z/31Z/21Z (KW41Z) family built on ARM |reg| Cortex |reg|-M0+ processor with
12 The FRDM-KW41Z kit contains two Freedom boards that can be used as a
13 development board or a shield to connect to a host processor. The FRDM-KW41Z is
17 The FRDM-KW41Z highly-sensitive, optimized 2.4 GHz radio features a PCB
36 For more information about the KW41Z SoC and FRDM-KW41Z board:
38 - `KW41Z Website`_
39 - `KW41Z Datasheet`_
40 - `KW41Z Reference Manual`_
41 - `FRDM-KW41Z Website`_
42 - `FRDM-KW41Z User Guide`_
43 - `FRDM-KW41Z Schematics`_
92 The KW41Z SoC has three pairs of pinmux/gpio controllers, but only two are
93 currently enabled (PORTA/GPIOA and PORTC/GPIOC) for the FRDM-KW41Z board.
130 The KW41Z SoC is configured to use the 32 MHz external oscillator on the board
136 The KW41Z SoC has one UART, which is used for the console.
157 the `OpenSDA DAPLink FRDM-KW41Z Firmware`_.
166 the `OpenSDA J-Link FRDM-KW41Z Firmware`_.
230 .. _FRDM-KW41Z Website:
231 …/w-serieswireless-conn.m0-plus-m4/freedom-development-kit-for-kinetis-kw41z-31z-21z-mcus:FRDM-KW41Z
233 .. _FRDM-KW41Z User Guide:
236 .. _FRDM-KW41Z Schematics:
237    https://www.nxp.com/webapp/Download?colCode=FRDM-KW41Z-SCH
240 …ee/kinetis-kw41z-2.4-ghz-dual-mode-bluetooth-low-energy-and-802.15.4-wireless-radio-microcontrolle…
248 .. _OpenSDA DAPLink FRDM-KW41Z Firmware:
251 .. _OpenSDA J-Link FRDM-KW41Z Firmware:
252    https://www.segger.com/downloads/jlink/OpenSDA_FRDM-KW41Z