Lines Matching refs:debug
12 options and a built-in debug interface for flash programming and run-control.
19 - OpenSDA debug interface
117 A debug probe is used for both flashing and debugging the board. This board is
118 configured by default to use the :ref:`opensda-daplink-onboard-debug-probe`.
124 Option 1: Linkserver: :ref:`opensda-daplink-onboard-debug-probe` (Recommended)
127 Install the :ref:`linkserver-debug-host-tools` and make sure they are in your
128 search path. LinkServer works with the CMSIS-DAP debug firmware. Please follow the
129 instructions on :ref:`opensda-daplink-onboard-debug-probe` and select the latest revision
132 Linkserver is the default for this board, ``west flash`` and ``west debug`` will
138 west debug
140 Option 2: :ref:`opensda-jlink-onboard-debug-probe`
143 Install the :ref:`jlink-debug-host-tools` and make sure they are in your search
146 Follow the instructions in :ref:`opensda-jlink-onboard-debug-probe` to program
168 Regardless of your choice in debug probe, we will use the OpenSDA
207 :goals: debug
239 …https://www.nxp.com/downloads/en/ide-debug-compile-build-tools/OpenSDAv2.2_DAPLink_frdmkl25z_rev02…