Lines Matching full:board

1 .. zephyr:board:: octopus_io_board
6 Octopus IO-Board is an expansion to the Octopus SoM, which is built around the nRF9160 SiP
7 offering NB-IoT and LTE-M connectivity, GPS and accelerometer. Octopus IO-Board expands
29 Octopus IO-Board offers the following features:
44 More information about the board can be found at the `Octopus IO-Board Product Page`_
45 and in the `Octopus IO-Board Documentation`_.
53 The Octopus IO-Board features multiple dedicated pin headers for peripherals:
69 The Octopus IO-Board can be powered from the following sources:
76 When powered from USB-C or solar cell, the board can charge the Li-Po battery. The battery voltage …
81 The board has a built-in LDO regulator that is used to power the Octopus SoM and peripherals. The E…
84 …board also has multiple built-in test points for measuring current consumption of the board, which…
89 Norik Octopus IO-Board can be programmed and debugged using the Tag-Connect TC2030-IDC 6-pin connec…
94 In most case you'll need to use ``octopus_io_board/nrf9160/ns`` board target for building examples.
95 …ples don't require non secure mode and can be built with ``octopus_io_board/nrf9160`` board target.
110 Replace <tty_device> with the port where the Octopus IO-Board can be found. For example, under Linu…
116    :board: octopus_io_board/nrf9160
123    :board: octopus_io_board/nrf9160/ns
131 Testing the on-board LED
133 …ample:`blinky` to test the on-board LED. Build and flash the example to make sure Zephyr is runnin…
137    :board: octopus_io_board/nrf9160
145 .. _Octopus IO-Board Product Page: https://www.norik.com/octopus-io-board/
146 .. _Octopus IO-Board Documentation: https://www.norik.com/wp-content/uploads/2024/09/Octopus_IO-Boa…