Lines Matching refs:default
160 The 32 bit version, ``native_sim``, is the default target, which will compile
179 By default it will be compiled with the host C library (:kconfig:option:`CONFIG_EXTERNAL_LIBC`),
183 :ref:`Picolibc <c_library_picolibc>` will be selected by default instead.
244 The default behavior is set with
304 This model provides the system tick timer. By default
325 By default this is initialized to the host time at boot.
428 When building for the default 32bit ``native_sim`` target this driver requires a 32-bit version of
433 On Ubuntu the package is ``libsdl2-dev`` whose 64bit version is likely installed by default.
452 By default this is kept in the file :file:`eeprom.bin` in the current working directory, but you
462 By default the binary data is located in the file :file:`flash.bin` in the current
517 to instantiate up to two UARTs. By default only one UART is enabled.
531 which (by default) a normal Linux terminal is not.
547 option ``-attach_uart_cmd=<"cmd">``. Where the default command is given by
549 Note that the default command assumes both ``xterm`` and ``screen`` are
579 * The default serial port and baud rate can be set via the device tree
611 A console backend which by default is configured to
615 This driver is selected by default if the `PTTY UART`_ is not compiled in.
629 In native_sim, by default, the logger is configured with
633 and is enabled by default.
660 By default the partitions are exposed through the directory :file:`flash/` in the