Lines Matching +full:chip +full:- +full:specific
6 The Mikroe Clicker RA4M1 development board contains a Renesas Cortex-M4 based
13 The Clicker RA4M1 board contains a USB Type-C connector, two LEDs, two push
14 buttons, and a reset button. It has J-Link onboard and mikroBUS socket for
24 +-----------+------------+-------------------------------------+
27 | NVIC | on-chip | nested vector interrupt controller |
28 +-----------+------------+-------------------------------------+
29 | UART | on-chip | serial port-polling |
30 +-----------+------------+-------------------------------------+
31 | PINMUX | on-chip | pinmux |
32 +-----------+------------+-------------------------------------+
33 | GPIO | on-chip | GPIO output |
35 +-----------+------------+-------------------------------------+
52 Here is an example for building and flashing the :zephyr:code-sample:`blinky` application.
54 .. zephyr-app-commands::
55 :zephyr-app: samples/basic/blinky
63 The following command is debugging the :zephyr:code-sample:`blinky` application.
64 Also, see the instructions specific to the debug server that you use.
66 .. zephyr-app-commands::
67 :zephyr-app: samples/basic/blinky
69 :maybe-skip-config:
75 .. target-notes::
78 https://www.mikroe.com/ra4m1-clicker