Lines Matching refs:C3
6 Lilygo TTGO T8-C3 is an IoT mini development board based on the
7 Espressif ESP32-C3 WiFi/Bluetooth dual-mode chip.
11 - ESP32-C3 chip (160MHz single core, 400KB SRAM, Wi-Fi)
19 This board is based on the ESP32-C3 with 4MB of flash, WiFi and BLE support. It
54 Before powering up your Lilygo TTGO T8-C3, please make sure that the board is in good
111 bootstrap the board with the ESP32-C3 SoC.
123 By default, the ESP32-C3 sysbuild creates bootloader (MCUboot) and application
178 The default baud rate for the Lilygo TTGO T8-C3 is set to 1500000bps. If experiencing issues when f…
199 The following samples will run out of the box on the TTGO T8-C3 board.
220 .. _`Lilygo TTGO T8-C3 schematic`: https://github.com/Xinyuan-LilyGO/T8-C3/blob/main/Schematic/T8-C…
222 .. _`Espressif ESP32-C3 datasheet`: https://www.espressif.com/sites/default/files/documentation/esp…
223 .. _`Espressif ESP32-C3 technical reference manual`: https://www.espressif.com/sites/default/files/…