Lines Matching +full:blue +full:- +full:output +full:- +full:current
3 FANKE FK7B0M1-VBT6
9 The FK7B0M1-VBT6 core board by FANKE Technology Co., Ltd. is an advanced microcontroller
10 platform based on the STMicroelectronics Arm® Cortex®-M7 core STM32H7B0VBT6 microcontroller.
11 This board is an ideal solution for developers looking to create high-performance
12 applications, especially in the field of Human-Machine Interface (HMI), leveraging its
15 The FK7B0M1-VBT6 is designed as a reference design for user application development before
24 :alt: FK7B0M1-VBT6
26 FK7B0M1-VBT6 (Credit: FANKE Technology Co., Ltd)
31 FK7B0M1-VBT6 provides the following hardware components:
33 - STM32H7B6VB in LQFP100 package
34 - ARM 32-bit Cortex-M7 CPU with FPU
35 - 280 MHz max CPU frequency
36 - VDD from 1.62 V to 3.6 V
37 - 128 KB Flash
38 - ~1.4 MB SRAM max (1.18 Mbytes user SRAM + 64 Kbytes ITCM RAM + 128 Kbytes DTCM RAM + 4 Kbytes SRA…
39 - Main clock: External 25MHz crystal oscillator.
40 - RTC: 32.768kHz crystal oscillator.
41 - 32-bit timers(2)
42 - 16-bit timers(12)
43 - 1 reset button, 1 user button, and 1 BOOT button
44 - 1 user LED
45 - External 64-Mbit QSPI (W25Q64) NOR Flash memory.
46 - External 64-Mbit SPI (W25Q64) NOR Flash memory.
47 - USB OTG Full Speed and High Speed(1)
48 - 1 micro SD card
49 - 1 RGB LCD interface
50 - SWD and serial port accessibility through a pin header
51 - Bring out 39 IO ports
55 - `STM32H7B0VB on www.st.com`_
63 +-------------+------------+-------------------------------------+
66 | NVIC | on-chip | nested vector interrupt controller |
67 +-------------+------------+-------------------------------------+
68 | FLASH | on-chip | flash memory |
69 +-------------+------------+-------------------------------------+
70 | UART | on-chip | serial port |
71 +-------------+------------+-------------------------------------+
72 | PINMUX | on-chip | pinmux |
73 +-------------+------------+-------------------------------------+
74 | GPIO | on-chip | gpio |
75 +-------------+------------+-------------------------------------+
76 | RNG | on-chip | True Random number generator |
77 +-------------+------------+-------------------------------------+
78 | Backup SRAM | on-chip | Backup SRAM |
79 +-------------+------------+-------------------------------------+
80 | SPI | on-chip | spi bus |
81 +-------------+------------+-------------------------------------+
82 | OCTOSPI | on-chip | octospi |
83 +-------------+------------+-------------------------------------+
93 FK7B0M1-VBT6 board has 5 GPIO controllers. These controllers are responsible for pin muxing,
94 input/output, pull-up, etc.
99 :alt: FK7B0M1-VBT6
101 FK7B0M1-VBT6 (Credit: FANKE Technology Co., Ltd)
104 ----------------------------------
106 The FK7B0M1-VBT6 board is configured as follows
108 - UART_1 TX/RX : PA9/PA10 (available on the header pins)
109 - User LED (blue) : PC1
110 - User PB : PC13
111 - SPI1 NCS/CLK/MISO/MOSI : PA15/PB3/PB4/PB5 (NOR Flash)
112 - QuadSPI NCS/CLK/IO0/IO1/IO2/IO3 : PB6/PB2/PD11/PD12/PE2/PD13 (NOR Flash)
113 - USB DM/DP : PA11/PA12
118 The FK7B0M1-VBT6 System Clock could be driven by an internal or external oscillator,
125 The Zephyr console output is assigned to UART1. The default communication settings are 115200 8N1.
136 The FK7B0M1-VBT6 board does not include an on-board debugger. As a result, it requires
137 an external debugger, such as ST-Link, for programming and debugging purposes.
141 Flashing an application to FK7B0M1-VBT6
142 ---------------------------------------
144 To begin, connect the ST-Link Debug Programmer to the FK7B0M1-VBT6 board using the SWD
145 interface. Next, connect the ST-Link to your host computer via a USB port.
148 Here is an example for the :zephyr:code-sample:`hello_world` application.
150 .. zephyr-app-commands::
151 :zephyr-app: samples/hello_world
157 .. code-block:: console
159 $ minicom -D /dev/ttyACM0 -b 115200
163 .. code-block:: console
170 This current Zephyr port does not support debugging.
175 .. target-notes::