Lines Matching +full:sample +full:- +full:clk
6 The FK750M1-VBT6 core board by FANKE Technology Co., Ltd. is an advanced microcontroller
7 platform based on the STMicroelectronics Arm® Cortex®-M7 core STM32H750VBT6 microcontroller.
8 This board is an ideal solution for developers looking to create high-performance
12 The FK750M1-VBT6 is designed as a reference design for user application development before
20 FK750M1-VBT6 provides the following hardware components:
22 - STM32H750VB in LQFP100 package
23 - ARM 32-bit Cortex-M7 CPU with FPU
24 - 480 MHz max CPU frequency
25 - 128 KB Flash
26 - 1 MB SRAM: 192 Kbytes TCM RAM (64 Kbytes ITCM RAM + 128 Kbytes DTCM RAM), 864 Kbytes user SRAM, a…
27 - Main clock: External 25MHz crystal oscillator.
28 - RTC: 32.768kHz crystal oscillator.
29 - high-resolution timers(2.1 ns max resolution, 1)
30 - 32-bit timers(2)
31 - 16-bit timers(17)
32 - 1 reset button, and 1 BOOT button
33 - 1 user LED
34 - External 64-Mbit QSPI (W25Q64) NOR Flash memory.
35 - USB OTG Full Speed and High Speed(1)
36 - 1 micro SD card
37 - 1 DCMI camera interface
38 - 1 SPI LCD interface
39 - SWD and serial port accessibility through a pin header
40 - Bring out 73 IO ports
44 - `STM32H750VB on www.st.com`_
52 +-------------+------------+-------------------------------------+
55 | NVIC | on-chip | nested vector interrupt controller |
56 +-------------+------------+-------------------------------------+
57 | FLASH | on-chip | flash memory |
58 +-------------+------------+-------------------------------------+
59 | UART | on-chip | serial port |
60 +-------------+------------+-------------------------------------+
61 | PINMUX | on-chip | pinmux |
62 +-------------+------------+-------------------------------------+
63 | GPIO | on-chip | gpio |
64 +-------------+------------+-------------------------------------+
65 | RNG | on-chip | True Random number generator |
66 +-------------+------------+-------------------------------------+
67 | Backup SRAM | on-chip | Backup SRAM |
68 +-------------+------------+-------------------------------------+
69 | SPI | on-chip | spi bus |
70 +-------------+------------+-------------------------------------+
71 | QUADSPI | on-chip | quadspi |
72 +-------------+------------+-------------------------------------+
82 FK750M1-VBT6 board has 5 GPIO controllers. These controllers are responsible for pin muxing,
83 input/output, pull-up, etc.
86 ----------------------------------
88 The FK750M1-VBT6 board is configured as follows
90 - UART_1 TX/RX : PA9/PA10 (available on the header pins)
91 - User LED (blue) : PC13
92 - SPI4 NCS/CLK/MOSI : PE11/PE12/PE14 (SPI LCD)
93 - QuadSPI NCS/CLK/IO0/IO1/IO2/IO3 : PB6/PB2/PD11/PD12/PE2/PD13 (NOR Flash)
94 - USB DM/DP : PA11/PA12
99 The FK750M1-VBT6 System Clock could be driven by an internal or external oscillator,
117 The FK750M1-VBT6 board does not include an on-board debugger. As a result, it requires
118 an external debugger, such as ST-Link, for programming and debugging purposes.
122 Flashing an application to FK750M1-VBT6
123 ---------------------------------------
125 To begin, connect the ST-Link Debug Programmer to the FK750M1-VBT6 board using the SWD
126 interface. Next, connect the ST-Link to your host computer via a USB port.
129 Here is an example for the :zephyr:code-sample:`hello_world` application.
131 .. zephyr-app-commands::
132 :zephyr-app: samples/hello_world
138 .. code-block:: console
140 $ minicom -D /dev/ttyACM0 -b 115200
144 .. code-block:: console
156 .. target-notes::