Lines Matching +full:blue +full:- +full:output +full:- +full:current
6 The FK750M1-VBT6 core board by FANKE Technology Co., Ltd. is an advanced microcontroller
7 platform based on the STMicroelectronics Arm® Cortex®-M7 core STM32H750VBT6 microcontroller.
8 This board is an ideal solution for developers looking to create high-performance
12 The FK750M1-VBT6 is designed as a reference design for user application development before
20 FK750M1-VBT6 provides the following hardware components:
22 - STM32H750VB in LQFP100 package
23 - ARM 32-bit Cortex-M7 CPU with FPU
24 - 480 MHz max CPU frequency
25 - 128 KB Flash
26 - 1 MB SRAM: 192 Kbytes TCM RAM (64 Kbytes ITCM RAM + 128 Kbytes DTCM RAM), 864 Kbytes user SRAM, a…
27 - Main clock: External 25MHz crystal oscillator.
28 - RTC: 32.768kHz crystal oscillator.
29 - high-resolution timers(2.1 ns max resolution, 1)
30 - 32-bit timers(2)
31 - 16-bit timers(17)
32 - 1 reset button, and 1 BOOT button
33 - 1 user LED
34 - External 64-Mbit QSPI (W25Q64) NOR Flash memory.
35 - USB OTG Full Speed and High Speed(1)
36 - 1 micro SD card
37 - 1 DCMI camera interface
38 - 1 SPI LCD interface
39 - SWD and serial port accessibility through a pin header
40 - Bring out 73 IO ports
44 - `STM32H750VB on www.st.com`_
52 +-------------+------------+-------------------------------------+
55 | NVIC | on-chip | nested vector interrupt controller |
56 +-------------+------------+-------------------------------------+
57 | FLASH | on-chip | flash memory |
58 +-------------+------------+-------------------------------------+
59 | UART | on-chip | serial port |
60 +-------------+------------+-------------------------------------+
61 | PINMUX | on-chip | pinmux |
62 +-------------+------------+-------------------------------------+
63 | GPIO | on-chip | gpio |
64 +-------------+------------+-------------------------------------+
65 | RNG | on-chip | True Random number generator |
66 +-------------+------------+-------------------------------------+
67 | Backup SRAM | on-chip | Backup SRAM |
68 +-------------+------------+-------------------------------------+
69 | SPI | on-chip | spi bus |
70 +-------------+------------+-------------------------------------+
71 | QUADSPI | on-chip | quadspi |
72 +-------------+------------+-------------------------------------+
82 FK750M1-VBT6 board has 5 GPIO controllers. These controllers are responsible for pin muxing,
83 input/output, pull-up, etc.
86 ----------------------------------
88 The FK750M1-VBT6 board is configured as follows
90 - UART_1 TX/RX : PA9/PA10 (available on the header pins)
91 - User LED (blue) : PC13
92 - SPI4 NCS/CLK/MOSI : PE11/PE12/PE14 (SPI LCD)
93 - QuadSPI NCS/CLK/IO0/IO1/IO2/IO3 : PB6/PB2/PD11/PD12/PE2/PD13 (NOR Flash)
94 - USB DM/DP : PA11/PA12
99 The FK750M1-VBT6 System Clock could be driven by an internal or external oscillator,
106 The Zephyr console output is assigned to UART1. The default communication settings are 115200 8N1.
117 The FK750M1-VBT6 board does not include an on-board debugger. As a result, it requires
118 an external debugger, such as ST-Link, for programming and debugging purposes.
122 Flashing an application to FK750M1-VBT6
123 ---------------------------------------
125 To begin, connect the ST-Link Debug Programmer to the FK750M1-VBT6 board using the SWD
126 interface. Next, connect the ST-Link to your host computer via a USB port.
129 Here is an example for the :zephyr:code-sample:`hello_world` application.
131 .. zephyr-app-commands::
132 :zephyr-app: samples/hello_world
138 .. code-block:: console
140 $ minicom -D /dev/ttyACM0 -b 115200
144 .. code-block:: console
151 This current Zephyr port does not support debugging.
156 .. target-notes::