Lines Matching refs:ESP32

6 The ESP32-S3-EYE is a small-sized AI development board produced by [Espressif](https://espressif.co…
7 It is based on the [ESP32-S3](https://www.espressif.com/en/products/socs/esp32-s3) SoC.
9 recognition and audio processing. ESP32-S3-EYE offers plenty of storage, with an 8 MB Octal PSRAM
15 The ESP32-S3-EYE board consists of two parts: the main board (ESP32-S3-EYE-MB) that integrates the
16 ESP32-S3-WROOM-1 module, camera, SD card slot, digital microphone, USB port, and function buttons;
17 and the sub board (ESP32-S3-EYE-SUB) that contains an LCD display.
23 The block diagram below presents main components of the ESP32-S3-EYE-MB main board (on the left)
24 and the ESP32-S3-EYE-SUB sub board (on the right), as well as the interconnections between
27 .. figure:: img/ESP32-S3-EYE_20210913_V03_SystemBlock.webp
29     :alt: ESP32-S3-EYE Block Diagram
31 Components on the ESP32-S3-EYE-MB Main Board
34 .. figure:: img/ESP32-S3-EYE_MB-annotated-photo.webp
36     :alt: ESP32-S3-EYE_MB
66      - ESP32-S3-WROOM-1
67 …ESP32-S3-WROOM-1 module embeds the ESP32-S3R8 chip variant that provides Wi-Fi and Bluetooth 5 (LE…
93 Components on the ESP32-S3-EYE-SUB Sub Board
96 .. figure:: img/ESP32-S3-EYE_SUB-annotated-photo.webp
98     :alt: ESP32-S3-EYE_SUB
106      - 1.3” LCD display, connected to ESP32-S3 over the SPI bus.
167 bootstrap the board with the ESP32 SoC.
179 By default, the ESP32 sysbuild creates bootloader (MCUboot) and application
252 ESP32-S3 modules require patches to OpenOCD that are not upstreamed yet.
254 `OpenOCD ESP32`_
277 .. _`OpenOCD ESP32`: https://github.com/espressif/openocd-esp32/releases