Lines Matching refs:bitstream

13 The bitstream (FPGA configuration file) can be obtained using both
47 bitstream for the FPGA on a Digilent Arty A7-35 Board or SDI-MIPI Video Converter. This can be achi…
59 In order to generate the bitstream,
70 …Generating the bitstream for the Digilent Arty A7-35 Board requires F4PGA toolchain installation. …
73    In order to generate the bitstream for the SDI-MIPI Video Converter, install
100 #. Generate the bitstream for the Arty 35T:
106 #. Generate the bitstream for the Arty 100T:
112 #. Generate the bitstream for the SDI-MIPI Video Converter:
120 You can also generate the bitstream using the `official LiteX repository <https://github.com/enjoy-…
161 If you were generating bitstream with the official LiteX SoC builder you need to pass an additional…
170 To upload the bitstream to Digilent Arty A7-35 you can use `xc3sprog <https://github.com/matrix-io/…
181 Use `ecpprog <https://github.com/gregdavill/ecpprog>`_ to upload the bitstream to SDI-MIPI Video Co…