Lines Matching +full:inter +full:- +full:cpu

7 Semiconductor nRF52840 ARM Cortex-M4F CPU and the following devices:
13 * :abbr:`I2C (Inter-Integrated Circuit)`
27 - Ezurio's BL654 (nRF52840 ARM Cortex-M4F processor at 64MHz)
28 - 1 MB flash memory and 256 KB of SRAM
29 - Coin-cell retainer for Lithium coincell batteries
30 - 2 Discrete LEDs (Red and Green)
31 - User Button
32 - Reset Button
33 - Accelerometer (LIS3DH)
34 - Ambient & RGB Light and Proximity Sensor (APDS9960)
35 - Temperature and Humidity Sensor (HTS221)
36 - Barometric Pressure sensor (LPS22H)
37 - Hall Effect Switch (MLX90248)
38 - RGB LED with Charge-Pump driver (LP5521)
39 - Digital Microphone
40 - Beeper
41 - QWIIC connector supporting expansion for I2C devices
42 - USB Connector for data and power
43 - 16-pin Expansion connector
44 - SWD Connector
49 - Discrete LEDs (red and green)
50 - Buttons (User and Reset)
51 - Sensors (Accelerometer, Light, Temperature and Humidity, Pressure and Hall-Effect sensors)
52 - Beeper
53 - Radio (Bluetooth, IEEE 802.15.4)
54 - SOC peripherals (ADC, Clock, Flash, GPIO, I2C, MPU, NVIC, PWM, Radio, RTC, SPI, USB, WDT)
59 - RGB LED (Charge-Pump driver not implemented)
60 - Microphone
69 ----
71 - LED1 (red) = P0.8
72 - LED2 (green) = P0.12
75 --------------
77 - User Button = P1.16
78 - Reset Button = P0.18
79 - Hall-Effect Switch = P0.15
94 Build the Zephyr kernel and the :zephyr:code-sample:`blinky` sample application.
96    .. zephyr-app-commands::
97       :zephyr-app: samples/basic/blinky
104    .. zephyr-app-commands::
105       :zephyr-app: samples/basic/blinky
115 .. target-notes::
121     https://croxeldata.s3.amazonaws.com/cx1825/CX1825-01_SCH_200424A.PDF