Lines Matching +full:xplained +full:- +full:boards
6 The SAM R34 Xplained Pro evaluation kit is ideal for evaluation and
7 prototyping with the SAM R34 Cortex®-M0+ processor-based
12 The SAMR34 and SAMR35 parts are produced as a System-in-Package (SiP),
20 - SAMR34J18 ARM Cortex-M0+ processor at 48 MHz
21 - 32.768 kHz crystal oscillator
22 - 256 KiB flash memory, 32 KiB of SRAM, 8KB Low Power SRAM
23 - One yellow user LED
24 - One mechanical user push button
25 - One reset button
26 - On-board USB based EDBG unit with serial console
34 .. list-table::
35 :header-rows: 1
37 * - Interface
38 - Controller
39 - Driver / Component
40 * - NVIC
41 - on-chip
42 - nested vector interrupt controller
43 * - Flash
44 - on-chip
45 - Can be used with LittleFS to store files
46 * - SYSTICK
47 - on-chip
48 - systick
49 * - WDT
50 - on-chip
51 - Watchdog
52 * - GPIO
53 - on-chip
54 - I/O ports
55 * - PWM
56 - on-chip
57 - Pulse Width Modulation
58 * - USART
59 - on-chip
60 - Serial ports
61 * - I2C
62 - on-chip
63 - I2C ports
64 * - SPI
65 - on-chip
66 - Serial Peripheral Interface ports
67 * - TRNG
68 - on-chip
69 - True Random Number Generator
74 .. list-table::
75 :header-rows: 1
77 * - Interface
78 - Controller
79 - Driver / Component
80 * - LoRa Radio
81 - on-chip
82 - Internal SX1276 LoRa Radio
87 :zephyr_file:`boards/atmel/sam0/samr34_xpro/samr34_xpro_defconfig`.
92 The SAM R34 Xplained Pro evaluation kit has 3 GPIO controllers. These
93 controllers are responsible for pin muxing, input/output, pull-up, etc.
96 Xplained Pro Schematic`_.
98 .. image:: img/atsamr34-xpro-pinout.jpg
100 :alt: SAMR34-XPRO-pinout
103 ----------------------------------
104 - SERCOM0 UART TX : PA04
105 - SERCOM0 UART RX : PA05
106 - SERCOM1 I2C SDA : PA16
107 - SERCOM1 I2C SCL : PA17
108 - SERCOM4 SPI MISO : PC19
109 - SERCOM4 SPI MOSI : PB30
110 - SERCOM4 SPI SCK : PC18
111 - SERCOM4 GPIO CS : PB31
112 - SERCOM5 SPI MISO : PB02
113 - SERCOM5 SPI MOSI : PB22
114 - SERCOM5 SPI SCK : PB23
115 - SERCOM5 GPIO CS0 : PA23
116 - SERCOM5 GPIO CS1 : PA14
117 - USB DP : PA25
118 - USB DM : PA24
119 - GPIO/PWM LED0 : PA19
125 with the on-chip PLL generating the 48 MHz system clock.
133 - SERCOM0 115200 8n1 - connected to the onboard Atmel Embedded Debugger (EDBG)
147 - SERCOM4 - connected to the internal LoRa radio
148 - SERCOM5 - connected to EXT1 and EXT3
153 The SAM R34 Xplained Pro comes with a Atmel Embedded Debugger (EDBG). This
162 .. zephyr-app-commands::
163 :zephyr-app: samples/hello_world
168 #. Connect the SAM R34 Xplained Pro to your host computer using the USB debug
174 .. code-block:: console
176 $ picocom -b 115200 /dev/ttyACM0
178 - Speed: 115200
179 - Data: 8 bits
180 - Parity: None
181 - Stop bits: 1
185 .. zephyr-app-commands::
186 :zephyr-app: samples/hello_world
196 .. target-notes::
199 https://www.microchip.com/en-us/development-tool/dm320111
205 …https://ww1.microchip.com/downloads/en/DeviceDoc/SAM-R34-R35-Low-Power-LoRa-Sub-GHz-SiP-Data-Sheet…
207 .. _SAM R34 Xplained Pro Schematic:
211 https://www.semtech.com/products/wireless-rf/lora-transceivers/sx1276