Lines Matching refs:chip
36 | NVIC | on-chip | nested vector interrupt controller |
38 | SYSTICK | on-chip | systick |
40 | AFEC | on-chip | adc |
42 | CAN FD | on-chip | can |
44 | COUNTER | on-chip | counter |
46 | ETHERNET | on-chip | ethernet |
48 | GPIO | on-chip | gpio |
50 | DAC | on-chip | dac |
52 | HWINFO | on-chip | Unique device serial number |
54 | I2C | on-chip | i2c |
56 | I2S | on-chip | i2s |
58 | PWM | on-chip | pwm |
60 | SPI | on-chip | spi |
62 | UART | on-chip | serial port |
64 | USART | on-chip | serial port |
66 | USB | on-chip | USB device |
68 | WATCHDOG | on-chip | watchdog |
70 | XDMAC | on-chip | dma |
87 with the on-chip PLL to generate a 300 MHz system clock.
94 chip.
103 By default a factory new SAM E70 chip will boot SAM-BA boot loader located in
108 If your chip has a security bit GPNVM0 set you will be unable to program flash
110 is to perform a chip erase procedure that will erase all GPNVM bits and the full