Lines Matching refs:S1
3 ARM V2M Musca-S1
10 on the V2M Musca-S1 board. It provides support for the Musca-S1 ARM Cortex-M33
20 :alt: ARM V2M Musca-S1
22 More information about the board can be found at the `V2M Musca-S1 Website`_.
27 ARM V2M MUSCA-S1 provides the following hardware components:
94 See the `V2M Musca-S1 Website`_ for a complete list of V2M Musca-S1 board
103 Musca-S1 is a Cortex-M33 based SoC and has 15 fixed exceptions and 77 IRQs.
164 The ARM V2M Musca-S1 board's GPIO controller is responsible for pin-muxing,
168 Mapping from the ARM V2M Musca-S1 Board pins to GPIO controller pins:
202 For more details please refer to `Musca-S1 Technical Reference Manual (TRM)`_.
208 Musca-S1 has a built-in RGB LED connected to GPIO[4:2] pins.
219 V2M Musca-S1 has a 32.768kHz crystal clock. The clock goes to a PLL and is
228 The ARM Musca-S1 processor has two UARTs. Both the UARTs have only two wires
246 The ARM Musca-S1 test chip implements a Serial Configuration Control (SCC)
252 Normal Musca-S1 test chip boot operation is from 2MB eMRAM by default, and
253 it offers the fastest boot method. Musca-S1 test chip also support to boot from
260 Musca-S1 supports the v8m security extension, and by default boots to the
282 V2M Musca-S1 provides:
318 Uploading an application to V2M Musca-S1
326 format before being flashed to a V2M Musca-S1. An optional bootloader can also
347 :alt: The Musca-S1 with the USB connected and powered-on
349 To upload the application, connect the V2M Musca-S1 to your host computer using
360 Musca-S1 Dual Firmware Version 1.9
384 Building the TF-M integration sample for Musca-S1
396 To upload the build artifact to the board, first connect the Musca-S1 to your
400 an application to V2M Musca-S1' section.)
411 .. _V2M Musca-S1 Website: argument
412 https://developer.arm.com/Tools%20and%20Software/Musca-S1%20Test%20Chip%20Board
414 .. _Musca-S1 Technical Reference Manual (TRM): argument