Lines Matching +full:led +full:- +full:gpios

1 /dts-v1/;
4 #include "apollo3p_evb-pinctrl.dtsi"
5 #include <zephyr/dt-bindings/input/input-event-codes.h>
16 		zephyr,shell-uart = &uart0;
17 		zephyr,uart-pipe = &uart0;
18 		zephyr,flash-controller = &flash;
33 		compatible = "gpio-leds";
35 			gpios = <&gpio0_31 10 GPIO_ACTIVE_LOW>;
36 			label = "LED 0";
39 			gpios = <&gpio0_31 30 GPIO_ACTIVE_LOW>;
40 			label = "LED 1";
43 			gpios = <&gpio0_31 15 GPIO_ACTIVE_LOW>;
44 			label = "LED 2";
47 			gpios = <&gpio0_31 14 GPIO_ACTIVE_LOW>;
48 			label = "LED 3";
51 			gpios = <&gpio0_31 17 GPIO_ACTIVE_LOW>;
52 			label = "LED 4";
57 		compatible = "gpio-keys";
59 			gpios = <&gpio0_31 16 GPIO_ACTIVE_LOW>;
64 			gpios = <&gpio0_31 18 GPIO_ACTIVE_LOW>;
69 			gpios = <&gpio0_31 19 GPIO_ACTIVE_LOW>;
77 	erase-block-size = <8192>;
78 	write-block-size = <4>;
81 		compatible = "fixed-partitions";
82 		#address-cells = <1>;
83 		#size-cells = <1>;
94 	clk-source = <3>;
98 	pinctrl-0 = <&bleif_default>;
99 	pinctrl-names = "default";
104 	current-speed = <115200>;
105 	pinctrl-0 = <&uart0_default>;
106 	pinctrl-names = "default";
111 	pinctrl-0 = <&itm_default>;
112 	pinctrl-names = "default";
122 	pinctrl-0 = <&spi0_default>;
123 	pinctrl-names = "default";
124 	cs-gpios = <&gpio0_31 11 GPIO_ACTIVE_LOW>;
125 	clock-frequency = <DT_FREQ_M(1)>;
131 	pinctrl-0 = <&i2c3_default>;
132 	pinctrl-names = "default";
133 	clock-frequency = <I2C_BITRATE_STANDARD>;
134 	scl-gpios = <&gpio32_63 10 (GPIO_OPEN_DRAIN | GPIO_PULL_UP)>;
135 	sda-gpios = <&gpio32_63 11 (GPIO_OPEN_DRAIN | GPIO_PULL_UP)>;
178 	pinctrl-0 = <&adc0_default>;
179 	pinctrl-names = "default";