Lines Matching full:sdp
6 The EVAL-SDP-CK1Z (SDP-K1) controller board is a system demonstration platform
7 (SDP) from Analog Devices designed to connect to evaluation shields containing
22 - Arduino UNO and 120-pin SDP connectors
24 More information about the board can be found on the `ADI SDP-K1 website`_.
29 ADI SDP-K1 provides the following hardware components:
89 For more details please refer to `EVAL-SDP-CK1Z User Guide`_.
96 :alt: ADI SDP-K1 Arduino UNO headers pinout
98 ADI SDP-K1 (Credit: Analog Devices, Inc.)
100 120-pin SDP connector
105 :alt: ADI SDP-K1 120-pin SDP connector pinout
107 ADI SDP-K1 (Credit: Analog Devices, Inc.)
122 The ADI SDP-K1 be programmed over USB using the DAPLink firmware running on an
136 Then attach the debugger to the 10-pin ``DEBUG`` header on the SDP-K1. Finally
137 connect the SDP-K1 to your host computer using the USB-C port.
161 .. _ADI SDP-K1 website:
162 …www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/sdp-k1.html
164 .. _EVAL-SDP-CK1Z User Guide:
165 https://www.analog.com/media/en/technical-documentation/user-guides/EVAL-SDP-CK1Z-UG-1539.pdf