Lines Matching +full:10 +full:base +full:- +full:t1l
5 The AD-APARD32690-SL is a platform for prototyping intelligent, secure, and connected field devices.
6 It has an Arduino Mega-compatible form factor and two Pmod-compatible connectors.
7 The system includes the MAX32690 ARM Cortex-M4 with FPU-Based Microcontroller and Bluetooth LE 5.2.
10 security features such as for root-of-trust, mutual authentication, data confidentiality and
12 A 10 Mbps single-pair Ethernet link using the ADIN1110 10BASE-T1L MAC/PHY, enables remote
13 data acquisition and system configuration. The 10BASE-T1L interface also supports Single-pair
22 - MAX32690 MCU:
24 - Ultra-Efficient Microcontroller for Battery-Powered Applications
26 - 120MHz Arm Cortex-M4 Processor with FPU
27 - 7.3728MHz and 60MHz Low-Power Oscillators
28 - External Crystal Support (32MHz required for BLE)
29 - 32.768kHz RTC Clock (Requires External Crystal)
30 - 8kHz Always-On Ultra-Low Power Oscillator
31 - 3MB Internal Flash, 1MB Internal SRAM (832kB ECC ON)
32 - TBDμW/MHz Executing from Cache at 1.1V
33 - 1.8V and 3.3V I/O with No Level Translators
34 - External Flash & SRAM Expansion Interfaces
36 - Bluetooth 5.2 LE Radio
38 …- Dedicated, Ultra-Low-Power, 32-Bit RISC-V Coprocessor to Offload Timing-Critical Bluetooth Proce…
39 - Fully Open-Source Bluetooth 5.2 Stack Available
40 - Supports AoA, AoD, LE Audio, and Mesh
41 - High-Throughput (2Mbps) Mode
42 - Long-Range (125kbps and 500kbps) Modes
43 - Rx Sensitivity: -97.5dBm; Tx Power: +4.5dBm
44 - Single-Ended Antenna Connection (50Ω)
46 - Multiple Peripherals for System Control
48 - 16-Channel DMA
49 - Up To Five Quad SPI Master (60MHz)/Slave (48MHz)
50 - Up To Four 1Mbaud UARTs with Flow Control
51 - Up To Two 1MHz I2C Master/Slave
52 - I2S Master/Slave
53 - Eight External Channel, 12-bit 1MSPS SAR ADC w/ on-die temperature sensor
54 - USB 2.0 Hi-Speed Device
55 - 16 Pulse Train Engines
56 - Up To Six 32-Bit Timers with 8mA High Drive
57 - Up To Two CAN 2.0 Controllers
58 - Up To Four Micro-Power Comparators
59 - 1-Wire Master
61 - Security and Integrity
63 - ChipDNA Physically Un-clonable Function (PUF)
64 - Modular Arithmetic Accelerator (MAA), True Random Number Generator (TRNG)
65 - Secure Nonvolatile Key Storage, SHA-256, AES-128/192/256
66 - Secure Boot ROM
68 - External devices connected to the APARD32690:
70 - On-Board HyperRAM
71 - On-Board SPI Flash
72 - USB 2.0 Type-C interface to the MAX32690
73 - SPI PMOD connector
74 - I2C PMOD connector
75 - SWD 10-Pin Header
76 - On-Board Bluetooth 5.2 LE Radio antenna
77 - MAXQ1065 Ultralow Power Cryptographic Controller with ChipDNA
78 - ADIN1110 Robust, Industrial, Low Power 10BASE-T1L Ethernet MAC-PHY
79 - U-Blox NINA-W102 802.11b/g/n module with dual-mode Bluetooth v4.2
80 - On-Board 5V, 3.3V, 1.8V, and 1.1V voltage regulators
81 - 2-Pin external power supply terminal block (5V - 28V DC)
82 - Board Power Provided by either the USB Port or the 2-Pin connector
83 - Arduino Mega compatible header.
84 - Two general-purpose LEDs and one general purpose push button.
92 +-----------+------------+------------------------------------+
95 | NVIC | on-chip | nested vector interrupt controller |
96 +-----------+------------+------------------------------------+
97 | SYSTICK | on-chip | systick |
98 +-----------+------------+------------------------------------+
99 | CLOCK | on-chip | clock and reset control |
100 +-----------+------------+------------------------------------+
101 | GPIO | on-chip | gpio |
102 +-----------+------------+------------------------------------+
103 | UART | on-chip | serial |
104 +-----------+------------+------------------------------------+
105 | SPI | on-chip | spi |
106 +-----------+------------+------------------------------------+
107 | ADIN1110 | spi | ADIN1110 10BASE-T1L mac/phy |
108 +-----------+------------+------------------------------------+
109 | TRNG | on-chip | entropy |
110 +-----------+------------+------------------------------------+
111 | Timer | on-chip | counter |
112 +-----------+------------+------------------------------------+
113 | W1 | on-chip | one wire master |
114 +-----------+------------+------------------------------------+
120 +-----------+---------------+---------------+------------------------------------------------------…
124 … | | +-----------+ | +-----------------------------------------------------…
125 | | | | 1-2 | | | Connects the SWD UART TX to the (UART) RX port of …
126 … | | +-----------+ | +-----------------------------------------------------…
127 | | | | 2-3 | | | Connects the SWD UART TX to the UART0 TX pin of th…
128 … | | +-----------+ | +-----------------------------------------------------…
130 +-----------+---------------+---------------+------------------------------------------------------…
131 …50 | SWD RX | +-----------+ | +-----------------------------------------------------…
132 | | | | 1-2 | | | Connects the SWD UART RX to the (UART) TX port of …
133 … | | +-----------+ | +-----------------------------------------------------…
134 | | | | 2-3 | | | Connects the SWD UART RX to the UART0 RX pin of th…
135 … | | +-----------+ | +-----------------------------------------------------…
137 +-----------+---------------+---------------+------------------------------------------------------…
138 …51 | SWD POW | +-----------+ | +-----------------------------------------------------…
139 | | | | 1-2 | | | Connects the SWD Vcc pin to 3.3V. …
140 … | | +-----------+ | +-----------------------------------------------------…
141 | | | | 2-3 | | | Connects the SWD Vcc pin to 1.8V. …
142 … | | +-----------+ | +-----------------------------------------------------…
144 +-----------+---------------+---------------+------------------------------------------------------…
145 …38 | UART RX WIFI | +-----------+ | +-----------------------------------------------------…
146 | | | | 1-2 | | | Connect the U-Blox Nina W102 UART RX to the UART2A…
147 … | | +-----------+ | +-----------------------------------------------------…
148 | | | | Open | | | Disconnects the U-Blox Nina W102 UART RX from the …
149 … | | +-----------+ | +-----------------------------------------------------…
151 +-----------+---------------+---------------+------------------------------------------------------…
152 …58 | UART TX WIFI | +-----------+ | +-----------------------------------------------------…
153 | | | | 1-2 | | | Connect the U-Blox Nina W102 UART TX to the UART2A…
154 … | | +-----------+ | +-----------------------------------------------------…
155 | | | | Open | | | Disconnects the U-Blox Nina W102 UART TX from the …
156 … | | +-----------+ | +-----------------------------------------------------…
158 +-----------+---------------+---------------+------------------------------------------------------…
159 …4 | SW1 | +-----------+ | +-----------------------------------------------------…
161 … | | +-----------+ | +-----------------------------------------------------…
163 … | | +-----------+ | +-----------------------------------------------------…
165 +-----------+---------------+---------------+------------------------------------------------------…
166 …4 | SW2 | +-----------+ | +-----------------------------------------------------…
168 … | | +-----------+ | +-----------------------------------------------------…
170 … | | +-----------+ | +-----------------------------------------------------…
172 +-----------+---------------+---------------+------------------------------------------------------…
173 …4 | SW3 | +-----------+ | +-----------------------------------------------------…
175 … | | +-----------+ | +-----------------------------------------------------…
177 … | | +-----------+ | +-----------------------------------------------------…
179 +-----------+---------------+---------------+------------------------------------------------------…
189 SWD port. SWD debug can be accessed through the Cortex 10-pin connector, P9.
198 a Segger J-Link with Segger's native tooling by overriding the runner,
199 appending ``--runner jlink`` to your ``west`` command(s). The J-Link should
212 - `AD-APARD32690-SL web page`_
214 .. _AD-APARD32690-SL web page:
215 …https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/ad-apa…