Lines Matching +full:power +full:- +full:source

4  * SPDX-License-Identifier: Apache-2.0
7 /dts-v1/;
10 #include <adi/max32/max32690-pinctrl.dtsi>
11 #include <zephyr/dt-bindings/gpio/adi-max32-gpio.h>
12 #include <zephyr/dt-bindings/input/input-event-codes.h>
15 	model = "Analog Devices AD-APARD32690-SL";
20 		zephyr,shell-uart = &uart0;
26 		compatible = "gpio-leds";
42 		compatible = "gpio-keys";
58 		compatible = "arduino-header-r3";
59 		#gpio-cells = <2>;
60 		gpio-map-mask = <0xffffffff 0xffffffc0>;
61 		gpio-map-pass-thru = <0 0x3f>;
62 		gpio-map = <0 0 &gpio3 0 0>,	/* A0 */
116 	clock-source = <ADI_MAX32_PRPH_CLK_SRC_IBRO>;
117 	pinctrl-0 = <&uart0a_tx_p2_12 &uart0a_rx_p2_11>;
118 	pinctrl-names = "default";
119 	current-speed = <115200>;
120 	data-bits = <8>;
130 	clock-source = <ADI_MAX32_PRPH_CLK_SRC_IBRO>;
131 	pinctrl-0 = <&uart1a_tx_p2_16 &uart1a_rx_p2_14>;
132 	pinctrl-names = "default";
133 	current-speed = <115200>;
137 	power-source = <MAX32_VSEL_VDDIOH>;
141 	power-source = <MAX32_VSEL_VDDIOH>;
145 	power-source = <MAX32_VSEL_VDDIOH>;
149 	power-source = <MAX32_VSEL_VDDIOH>;
153 	pinctrl-0 = <&spi1a_miso_p1_28 &spi1a_mosi_p1_29 &spi1a_sck_p1_26
155 	pinctrl-names = "default";
159 	power-source = <MAX32_VSEL_VDDIOH>;
163 	power-source = <MAX32_VSEL_VDDIOH>;
167 	power-source = <MAX32_VSEL_VDDIOH>;
171 	power-source = <MAX32_VSEL_VDDIOH>;
175 	pinctrl-0 = <&spi4a_miso_p1_2 &spi4a_mosi_p1_1 &spi4a_sck_p1_3
177 	pinctrl-names = "default";
181 	power-source = <MAX32_VSEL_VDDIOH>;
185 	power-source = <MAX32_VSEL_VDDIOH>;
189 	power-source = <MAX32_VSEL_VDDIOH>;
193 	power-source = <MAX32_VSEL_VDDIOH>;
197 	pinctrl-0 = <&spi3a_miso_p0_20 &spi3a_mosi_p0_21 &spi3a_sck_p0_16
199 	pinctrl-names = "default";
205 		spi-max-frequency = <DT_FREQ_M(25)>;
206 		int-gpios = <&gpio0 17 (GPIO_ACTIVE_LOW | MAX32_GPIO_VSEL_VDDIOH)>;
207 		reset-gpios = <&gpio0 15 (GPIO_ACTIVE_LOW | MAX32_GPIO_VSEL_VDDIOH)>;
211 			local-mac-address = [ 00 E0 22 FE DA C9 ];
214 			compatible = "adi,adin2111-mdio";
215 			#address-cells = <1>;
216 			#size-cells = <0>;
218 			ethernet-phy@1 {
220 				compatible = "adi,adin2111-phy";
227 	pinctrl-0 = <&owm_io_p0_8 &owm_pe_p0_7>;
228 	pinctrl-names = "default";