Lines Matching full:96
3 96Boards Carbon
9 The 96Boards is based on the STMicroelectronics STM32F401RET Cortex-M4 CPU and
12 The 96Boards Carbon board is built with two chips: an STMicroelectronics
18 - The ``96b_carbon/stm32f401xe`` configuration is used when developing programs for
20 write applications targeting this chip, using the ``96b_carbon``
24 - The ``96b_carbon/nrf51822`` configuration should be used for programming
32 applications, see :ref:`96b_carbon_nrf51_bluetooth`.
36 :ref:`below <96b_carbon_verify_bluetooth>`.
38 .. figure:: img/96b_carbon.jpg
40 :alt: 96Boards Carbon
42 96Boards Carbon
47 96Boards Carbon provides the following hardware components:
54 - 96 KB SRAM
76 The Zephyr ``96b_carbon/stm32f401xe`` board configuration supports the following
101 More details about the board can be found at `96Boards website`_.
104 :zephyr_file:`boards/96boards/carbon/96b_carbon_stm32f401xe_defconfig`
197 `96Boards IE Specification`_.
208 96Boards Carbon board has up to 4 U(S)ARTs. The Zephyr console output is
214 96Boards Carbon board has up to 2 I2Cs. The default I2C mapping for Zephyr is:
224 96Boards Carbon board has up to 2 SPIs. SPI1 is used for Bluetooth communication
239 96Boards Carbon board has a USB OTG dual-role device (DRD) controller that
266 Flashing an Application to 96Boards Carbon
306 :board: 96b_carbon/stm32f401xe
316 Replace :code:`<tty_device>` with the port where the board 96Boards Carbon
337 :ref:`96b_carbon_nrf51_bluetooth`.
342 96b_carbon. See the instructions above for how to put your board
347 :board: 96b_carbon/stm32f401xe
353 Congratulations! Your 96Boards Carbon now has Bluetooth
360 The ``96b_carbon/stm32f401xe`` board can be debugged by installing a 100 mil (0.1 inch) header
363 pins on that header. Then apply power to the 96Boards Carbon via one
374 http://www.96boards.org/documentation