Lines Matching +full:96 +full:mhz

3 96Boards Argonkey
9 96Boards Argonkey board is based on the ST Microelectronics STM32F412CG
12 This board acts as a sensor hub platform for all 96Boards compliant
15 .. figure:: img/96b_argonkey.jpg
17      :alt: 96Boards Argonkey
19      96Boards Argonkey
24 96Boards Argonkey provides the following hardware components:
28 - 100 MHz max CPU frequency
54 The Zephyr 96b_argonkey board configuration supports the following hardware
81 :zephyr_file:`boards/96boards/argonkey/96b_argonkey_defconfig`
101 96Boards Argonkey can be driven by an internal oscillator as well as the main
102 PLL clock. In default board configuration, the 16MHz external oscillator is
103 used to drive the main PLL clock to generate a System Clock (SYSCLK) at 84MHz.
104 On the bus side, AHB clock runs at 84MHz, while APB1/APB2 clock runs at 42MHz.
109 On 96Boards Argonkey, Zephyr console output is assigned to USART1.
115 96Boards Argonkey board has up to 3 I2Cs. The default I2C mapping is:
129 96Boards Argonkey board has 2 SPIs. SPI1 is used in slave mode as the communication
152    :board: 96b_argonkey
158 96Boards Argonkey can be flashed by two methods, one using the ROM