Lines Matching refs:debug

5 A debug probe is used for both flashing and debugging the board. This board has
6 an :ref:`opensda-onboard-debug-probe`. The default firmware present on this
7 probe is the :ref:`opensda-daplink-onboard-debug-probe`.
10 to setup your debug probe:
12 * :ref:`jlink-debug-host-tools`: `Using J-Link on NXP OpenSDA Boards`_
13 * :ref:`linkserver-debug-host-tools`: `Using DAPLink on NXP OpenSDA Boards`_
14 * :ref:`pyocd-debug-host-tools`: `Using DAPLink on NXP OpenSDA Boards`_
19 1. If the debug firmware has been modified, follow the instructions provided at
20    :ref:`opensda-daplink-onboard-debug-probe` to reprogram the default debug
27 There are two options: the onboard debug circuit can be updated with Segger
28 J-Link firmware, or a :ref:`jlink-external-debug-probe` can be attached to the
31 To update the onboard debug circuit, please do the following:
33 1. If the debug firmware has been modified, follow the instructions provided at
34    :ref:`opensda-jlink-onboard-debug-probe` to reprogram the default debug