Lines Matching full:that
9 # that may be specific to the vendor of a M25P80-compatible device and
10 # only supported in certain drivers. Any information that can be
23 protection register that initializes to write-protected. Use this
24 property to indicate that the BPR must be unlocked before write
33 Power-Down mode that is entered by command 0xB9 to reduce power
35 implies that the RDPD (0xAB) Release from Deep Power Down command
52 Absence of this property indicates that the RDPD command should be
60 This provides the duration, in nanoseconds, that CSn must be
71 This provides the duration, in nanoseconds, that CSn must be
80 Bit mask of bits of the status register that should be cleared on
85 operation from working. Devices that have this behavior need to
87 non-volatile bits in the status register that should not be
91 that should be cleared when the device is initialized.