Lines Matching +full:tx +full:- +full:mask
2 # SPDX-License-Identifier: Apache-2.0
5 description: STM32 UART-BASE
7 include: [uart-controller.yaml, pinctrl-device.yaml, reset-device.yaml]
22 single-wire:
25 Enable the single wire half-duplex communication.
26 Using this mode, TX and RX lines are internally connected and
27 only TX pin is used afterwards and should be configured.
28 RX/TX conflicts must be handled on user side.
30 tx-rx-swap:
33 Swap the TX and RX pins. Used in case of a cross wired connection.
35 tx-invert:
38 Invert the binary logic of tx pin. When enabled, physical logic levels are inverted and
41 rx-invert:
47 pinctrl-0:
50 pinctrl-names:
53 wakeup-line:
56 EXTI line number matching the device wakeup interrupt mask register.
60 Valid range: 0 - 31
62 de-enable:
68 de-assert-time:
74 Valid range: 0 - 31
76 de-deassert-time:
82 Valid range: 0 - 31
84 de-invert: