Lines Matching full:side
7 The PWM CCU8 module can automatically generate a high-side
8 and a low-side PWM signal, where the two signals are complementary
11 The module supports adding a dead time between the high-side and
12 low-side PWM signals.
15 transitions from 0 to 1, preventing the high-side and low-side
20 two channels. A channel consists of a corresponding high-side
21 and low-side PWM signal.
47 and low side PWM signals.
60 'HIGH_LOW' indicates whether the pin is for the high or low-side signal.
62 It's not necessary to specify both the high and low pinctrls. Only the low-side
112 Defines the dead time in nanoseconds for the high-side PWM signal for each channel.
118 Defines the dead time in nanoseconds for the low-side PWM signal for each channel.