Lines Matching full:strength

16   lines slew and strength parameters.  In general, slew 0 and minimal strength
21     std-clk-strength-low = "0.5";
23     std-data-strength-low = "0.5";
26     hs-clk-strength-high = "0.5";
27     hs-clk-strength-low = "0.5";
29     hs-data-strength-low = "0.5";
59       std-clk-strength-low to fine tune the TWCK slope.
66   std-clk-strength-low:
70       Pull-down drive strength of the TWCK output buffer in fast/fast plus
89       std-data-strength-low to fine tune the TWD slope.
96   std-data-strength-low:
100       Pull-down drive strength of the TWD output buffer in fast/fast plus
119       should be adjusted with both hs-clk-strength-high and
120       hs-clk-strength-low to fine tune the TWCK slope.
127   hs-clk-strength-high:
131       Pull-up drive strength of the TWCK output buffer in high speed
141   hs-clk-strength-low:
145       Pull-down drive strength of the TWCK output buffer in high speed
164       should be adjusted with hs-data-strength-low to fine tune the TWD
172   hs-data-strength-low:
175       Pull-down drive strength of the TWD output buffer in high speed