Lines Matching +full:files +full:- +full:exclude
20 # doxygen -x [configFile]
24 # doxygen -x_noenv [configFile]
26 #---------------------------------------------------------------------------
28 #---------------------------------------------------------------------------
31 # file that follow. The default is UTF-8 which is also the encoding used for all
35 # The default value is: UTF-8.
37 DOXYFILE_ENCODING = UTF-8
40 # double-quotes, unless you are using Doxywizard) that should identify the
74 # sub-directories (in 2 levels) under the output directory of each output format
75 # and will distribute the generated files over these directories. Enabling this
76 # option can be useful when feeding doxygen a huge amount of source files, where
77 # putting all generated files in the same directory would otherwise causes
79 # control the number of sub-directories.
84 # Controls the number of sub-directories that will be created when
88 # sub-directories are organized in 2 levels, the first level always has a fixed
95 # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
96 # characters to appear in the names of generated files. If set to NO, non-ASCII
107 # Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, English
109 # Hindi, Hungarian, Indonesian, Italian, Japanese, Japanese-en (Japanese with
110 # English messages), Korean, Korean-en (Korean with English messages), Latvian,
112 # Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish,
134 # This tag implements a quasi-intelligent brief description abbreviator that is
138 # text. Otherwise, the brief description is used as-is. If left blank, the
161 # before files name in the file list and in the header files. If set to NO the
167 # The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
168 # Stripping is only done if one of the specified strings matches the left-hand
179 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
184 # using the -I flag.
190 # support long names like on DOS, Mac, or CD-ROM.
196 # first line (until the first dot) of a Javadoc-style comment as the brief
197 # description. If set to NO, the Javadoc-style will behave just like regular Qt-
207 # as being the beginning of a Javadoc-style comment "banner". If set to NO, the
208 # Javadoc-style will behave just like regular comments and it will not be
215 # line (until the first dot) of a Qt-style comment as the brief description. If
216 # set to NO, the Qt-style will behave just like regular Qt-style comments (thus
223 # multi-line C++ special comment block (i.e. a block of //! or /// comments) as
225 # to treat a multi-line C++ comment block as a detailed description. Set this
243 # documentation from any documented member that it re-implements.
267 # documentation, which will result in a user-defined paragraph with heading
276 ALIASES = "rst=\verbatim embed:rst:leading-asterisk" \
279 "req{1}=\ref ZEPH_\1 \"ZEPH-\1\"" \
285 …"no_wait=\htmlonly no-wait \endhtmlonly \xmlonly <verbatim>embed:rst:inline :ref:`api_term_no-wait…
286 …"isr_ok=\htmlonly isr-ok \endhtmlonly \xmlonly <verbatim>embed:rst:inline :ref:`api_term_isr-ok`</…
287 …"pre_kernel_ok=\htmlonly pre-kernel-ok \endhtmlonly \xmlonly <verbatim>embed:rst:inline :ref:`api_…
327 # Doxygen selects the parser to use depending on the extension of the files it
329 # extension. Doxygen has a built-in mapping, but you can override or extend it
332 # Csharp (C#), C, C++, Lex, D, PHP, md (Markdown), Objective-C, Python, Slice,
336 # default for Fortran type files). For instance to make doxygen treat .inc files
337 # as Fortran files (default is PHP), and .f files as C (default is Fortran),
340 # Note: For files without extension you can use no_extension as a placeholder.
343 # the files are not read by doxygen. When specifying no_extension you should add
350 # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
360 # When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up
470 # code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
493 #---------------------------------------------------------------------------
495 #---------------------------------------------------------------------------
532 # locally in source files will be included in the documentation. If set to NO,
533 # only classes defined in header files are included. Does not have any effect
539 # This flag is only useful for Objective-C code. If set to YES, local methods,
564 # undocumented members inside documented classes or files. If set to NO these
603 # filesystem is case sensitive (i.e. it supports files in the same directory
605 # deal with such files in case they appear in the input. For filesystems that
607 # output files written for symbols that only differ in casing, such as for two
609 # references to files without having to specify the exact matching casing. On
639 # the files that are included by a file in the documentation of that file.
652 # files with double quotes in the documentation rather than with sharp brackets.
698 # fully-qualified names, including namespaces. If set to NO, the class list will
759 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
761 # list will mention the files that were used to generate the documentation.
766 # Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
767 # will remove the Files entry from the Quick Index and from the Folder Tree View
783 # popen()) the command command input-file, where command is the value of the
784 # FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
792 # output files in an output format independent way. To create the layout file
793 # that represents doxygen's defaults, run doxygen with the -l option. You can
804 # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
805 # the reference definitions. This must be a list of .bib files. The .bib
814 #---------------------------------------------------------------------------
816 #---------------------------------------------------------------------------
877 # at the end of the doxygen process doxygen will return with a non-zero status.
907 # warning and error messages are written to standard error. When as file - is
913 #---------------------------------------------------------------------------
914 # Configuration options related to the input files
915 #---------------------------------------------------------------------------
917 # The INPUT tag is used to specify the files and/or directories that contain
918 # documented source files. You may enter file names like myfile.cpp or
919 # directories like /usr/src/myproject. Separate the files or directories with
931 # This tag can be used to specify the character encoding of the source files
932 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
937 # The default value is: UTF-8.
939 INPUT_ENCODING = UTF-8
941 # This tag can be used to specify the character encoding of the source files
946 # form: pattern=encoding (like *.php=ISO-8859-1). See cfg_input_encoding
953 # *.h) to filter out the source-files in the directories.
956 # need to set EXTENSION_MAPPING for the extension otherwise the files are not
975 # be searched for input files as well.
980 # The EXCLUDE tag can be used to specify files and/or directories that should be
981 # excluded from the INPUT source files. This way you can easily exclude a
987 EXCLUDE = @ZEPHYR_BASE@/include/zephyr/portability/cmsis_os.h \
990 # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
998 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
999 # certain files from those directories.
1002 # exclude all test directories for example use the pattern */test/*
1013 # exclude all test directories use the pattern */test/*
1020 # The EXAMPLE_PATH tag can be used to specify one or more files or directories
1028 # *.h) to filter out the source-files in the directories. If left blank all
1029 # files are included.
1034 # searched for input files to be used with the \include or \dontinclude commands
1040 # The IMAGE_PATH tag can be used to specify one or more files or directories
1050 # <filter> <input-file>
1052 # where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
1067 # need to set EXTENSION_MAPPING for the extension otherwise the files are not
1080 # need to set EXTENSION_MAPPING for the extension otherwise the files are not
1086 # INPUT_FILTER) will also be used to filter the input files that are used for
1087 # producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
1116 #---------------------------------------------------------------------------
1118 #---------------------------------------------------------------------------
1120 # If the SOURCE_BROWSER tag is set to YES then a list of source files will be
1121 # generated. Documented entities will be cross-referenced with these sources.
1165 # will make the HTML file larger and loading of large files a bit slower, you
1173 # point to the HTML generated by the htags(1) tool instead of doxygen built-in
1179 # - Install the latest version of global
1180 # - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file
1181 # - Make sure the INPUT points to the root of the source tree
1182 # - Run doxygen as normal
1206 # which doxygen's built-in parser lacks the necessary type information.
1208 # generated with the -Duse_libclang=ON option for CMake.
1223 # the include paths will already be set by doxygen for the files and directories
1233 # options used when the source files were built. This is equivalent to
1234 # specifying the -p option to a clang tool, such as clang-check. These options
1238 # generated with the -Duse_libclang=ON option for CMake.
1242 #---------------------------------------------------------------------------
1244 #---------------------------------------------------------------------------
1262 #---------------------------------------------------------------------------
1264 #---------------------------------------------------------------------------
1286 # The HTML_HEADER tag can be used to specify a user-defined HTML header file for
1294 # doxygen -w html new_header.html new_footer.html new_stylesheet.css
1306 # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
1316 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
1317 # sheet that is used by each HTML page. It can be used to fine-tune the look of
1328 # The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
1333 # Doxygen will copy the style sheet files to the output directory.
1334 # Note: The order of the extra style sheet files is of importance (e.g. the last
1344 HTML_EXTRA_STYLESHEET = @ZEPHYR_BASE@/doc/_doxygen/doxygen-awesome.css \
1345 @ZEPHYR_BASE@/doc/_doxygen/doxygen-awesome-sidebar-only.css \
1346 … @ZEPHYR_BASE@/doc/_doxygen/doxygen-awesome-sidebar-only-darkmode-toggle.css \
1347 @ZEPHYR_BASE@/doc/_doxygen/doxygen-awesome-zephyr.css
1350 # other source files which should be copied to the HTML output directory. Note
1351 # that these files will be copied to the base HTML output directory. Use the
1352 # $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
1353 # files. In the HTML_STYLESHEET file, use the file name only. Also note that the
1354 # files will be copied as-is; there are no commands or markers available.
1357 HTML_EXTRA_FILES = @ZEPHYR_BASE@/doc/_doxygen/doxygen-awesome-darkmode-toggle.js \
1358 @ZEPHYR_BASE@/doc/_doxygen/doxygen-awesome-zephyr.js
1375 # this color. Hue is specified as an angle on a color-wheel, see
1385 # in the HTML output. For a value of 0 the output will use gray-scales only. A
1444 # If the GENERATE_DOCSET tag is set to YES, additional index files will be
1475 # set bundle. This should be a reverse domain-name style string, e.g.
1483 # the documentation publisher. This should be a reverse domain-name style
1497 # additional HTML index files: index.hhp, index.hhc, and index.hhk. The
1504 # ad/0/A/9/0A939EF6-E31C-430F-A3DF-DFAE7960D564/htmlhelp.exe).
1508 # files are now used as the Windows 98 help format, and will replace the old
1510 # HTML files also contain an index, a table of contents, and you can search for
1512 # compressed HTML files.
1526 # including file name) of the HTML help compiler (hhc.exe). If non-empty,
1580 # https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
1589 # https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders).
1598 # https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
1606 # https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
1613 # https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes).
1619 # including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to
1625 # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
1626 # generated, together with the HTML files, they form an Eclipse help plugin. To
1628 # Eclipse, the contents of the directory containing the HTML and XML files needs
1638 # the directory name containing the HTML and XML files should also have this
1656 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1658 # value is set to YES, a side panel will be generated containing a tree-like
1663 # further fine tune the look of the index (see "Fine-tuning the output"). As an
1703 # external symbols imported via tag files in a separate window.
1744 # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
1767 # http://docs.mathjax.org/en/v2.7-latest/output.html) and MathJax version 3
1770 # Possible values are: HTML-CSS (which is slower, but has the best
1775 # translated into HTML-CSS) and SVG.
1776 # The default value is: HTML-CSS.
1779 MATHJAX_FORMAT = HTML-CSS
1789 # - in case of MathJax version 2: https://cdn.jsdelivr.net/npm/mathjax@2
1790 # - in case of MathJax version 3: https://cdn.jsdelivr.net/npm/mathjax@3
1797 # for MathJax version 2 (see https://docs.mathjax.org/en/v2.7-latest/tex.html
1798 # #tex-and-latex-extensions):
1810 # http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an
1904 #---------------------------------------------------------------------------
1906 #---------------------------------------------------------------------------
1982 # The LATEX_HEADER tag can be used to specify a user-defined LaTeX header for
1986 # doxygen -w latex new_header.tex new_footer.tex new_stylesheet.sty
1990 # Note: Only use a user-defined header if you know what you are doing!
1999 # The LATEX_FOOTER tag can be used to specify a user-defined LaTeX footer for
2005 # normally uses. Note: Only use a user-defined footer if you know what you are
2011 # The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
2014 # will copy the style sheet files to the output directory.
2015 # Note: The order of the extra style sheet files is of importance (e.g. the last
2023 # other source files which should be copied to the LATEX_OUTPUT output
2024 # directory. Note that the files will be copied as-is; there are no commands or
2041 # files. Set this option to YES, to get a higher quality PDF documentation.
2050 # command to the generated LaTeX files. This will instruct LaTeX to keep running
2088 #---------------------------------------------------------------------------
2090 #---------------------------------------------------------------------------
2139 # generated using doxygen -e rtf extensionFile.
2144 #---------------------------------------------------------------------------
2146 #---------------------------------------------------------------------------
2149 # classes and files.
2181 # man page(s). These additional files only source the real man page, but without
2188 #---------------------------------------------------------------------------
2190 #---------------------------------------------------------------------------
2207 # listings (including syntax highlighting and cross-referencing information) to
2222 #---------------------------------------------------------------------------
2224 #---------------------------------------------------------------------------
2226 # If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
2240 #---------------------------------------------------------------------------
2242 #---------------------------------------------------------------------------
2252 #---------------------------------------------------------------------------
2254 #---------------------------------------------------------------------------
2284 # so different doxyrules.make files included by the same Makefile don't
2290 #---------------------------------------------------------------------------
2292 #---------------------------------------------------------------------------
2295 # C-preprocessor directives found in the sources and include files.
2317 # If the SEARCH_INCLUDES tag is set to YES, the include files in the
2325 # contain include files that are not input files but should be processed by the
2333 # patterns (like *.h and *.hpp) to filter out the header-files in the
2341 # defined before the preprocessor is started (similar to the -D option of e.g.
2417 # remove all references to function-like macros that are alone on a line, have
2419 # are typically used for boiler-plate code, and will confuse the parser if not
2426 #---------------------------------------------------------------------------
2428 #---------------------------------------------------------------------------
2430 # The TAGFILES tag can be used to specify one or more tag files. For each tag
2434 # Adding location for the tag files is done as follows:
2438 # of tag files.
2446 # tag file that is based on the input files it reads. See section "Linking to
2447 # external documentation" for more information about the usage of tag files.
2472 #---------------------------------------------------------------------------
2474 #---------------------------------------------------------------------------
2509 # subgraphs. When you want a differently looking font in the dot files that
2547 # otherwise the built-in generator will be used. If the CLASS_GRAPH tag is set
2626 # files.
2635 # files.
2675 # files in the directories.
2693 # to make the SVG files visible in IE 9+ (other browsers do not have this
2709 # the SVG files visible. Older versions of IE do not have SVG support.
2722 # contain dot files that are included in the documentation (see the \dotfile
2729 # contain msc files that are included in the documentation (see the \mscfile
2735 # contain dia files that are included in the documentation (see the \diafile
2753 # When using plantuml, the specified paths are searched for files specified by
2783 # files in one run (i.e. multiple -o and -T options on the command line). This
2802 # files that are used to generate the various graphs.
2804 # Note: This setting is not only used for dot files but also for msc temporary
2805 # files.