Lines Matching +full:slave +full:- +full:mode
3 1-Wire Bus
9 1-Wire is a low speed half-duplex serial bus using only a single wire plus
11 Similarly to I2C, 1-Wire uses a bidirectional open-collector data line,
13 exchanges with the slave devices.
14 The 1-Wire bus supports longer bus lines than I2C, while it reaches speeds of up
15 to 15.4 kbps in standard mode and up to 125 kbps in overdrive mode.
23 .. figure:: 1-Wire_bus_topology.drawio.svg
25 :alt: 1-Wire bus topology
27 A typical 1-Wire bus topology
30 .. _w1-master-api:
35 Zephyr's 1-Wire Master API is used to interact with 1-Wire slave devices like
42 It is the only hardware-dependent layer in Zephyr.
47 * The 1-Wire network layer handles all means for slave identification and bus
51 * All slave devices have a unique 64-bit identification number, which
52 includes a 8-bit `1-Wire Family Code`_ and a 8-bit CRC.
58 generic 1-Wire driver and therefore must be handled in individual slave drivers.
60 The 1-Wire API is considered experimental.
75 1-Wire data link layer
80 1-Wire network layer
85 1-Wire generic functions and helpers
94 https://www.maximintegrated.com/en/design/technical-documents/app-notes/9/937.html
96 .. _1-Wire Family Code:
97 https://www.maximintegrated.com/en/design/technical-documents/app-notes/1/155.html
100 https://www.maximintegrated.com/en/design/technical-documents/app-notes/1/187.html