Lines Matching +full:current +full:- +full:limit
8 devices to draw current exceeding the USB 2.0 specification limit of 0.5A, 2.5W.
12 sinks current from the USB connection.
15 should not be confused with the USB-C Power Delivery, which also uses the
19 charger capability on USB type C ports when the attached type-C partner does not
27 Allowed PD (portable device) Current Draw from Charging Port IDEV_CHG 1.5 A
28 Charging Downstream Port Rated Current ICDP 1.5 - 5.0 A
29 Maximum Configured Current when connected to a SDP ICFG_MAX 500 mA
30 Dedicated Charging Port Rated Current IDCP 1.5 - 5.0 A
31 Suspend current ISUSP 2.5 mA
32 Unit load current IUNIT 100 mA
35 While the ICDP and IDCP rated currents go up to 5.0 A, the BC1.2 current is
37 the Zephyr implementation when using portable-device mode.
39 …. _BC1.2 Specification: https://www.usb.org/document-library/battery-charging-v12-spec-and-adopter…
48 either a disconnected, portable-device, or charging port mode.
60 For portable-device mode, the BC1.2 driver powers up the detection chip and
63 default, the BC1.2 driver clamps the current to 1.5A to comply with the BC1.2
68 driver reports the available current as ISUSP (2.5 mA). The application may
69 increase the current draw to IUNIT (100 mA) when the connected USB host resumes
70 the USB bus and may increase the current draw to ICFG_MAX (500 mA) when the USB
78 ``bc12_set_result_cb()`` to indicate the current connection state of the