Lines Matching +full:miso +full:- +full:gpios
2 /* SPDX-License-Identifier: Apache-2.0 */
4 /dts-v1/;
6 #include <sifive/riscv32-fe310.dtsi>
7 #include <zephyr/dt-bindings/i2c/i2c.h>
8 #include "hifive1-pinctrl.dtsi"
18 pwm-led0 = &pwmled0;
19 pwm-led1 = &pwmled1;
20 pwm-led2 = &pwmled2;
26 zephyr,shell-uart = &uart0;
32 compatible = "gpio-leds";
34 gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
38 gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
42 gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
48 compatible = "pwm-leds";
64 compatible = "arduino-header-r3";
65 #gpio-cells = <2>;
66 gpio-map-mask = <0xffffffff 0xffffffc0>;
67 gpio-map-pass-thru = <0 0x3f>;
68 gpio-map = /* A0 not connected */
86 <18 0 &gpio0 4 0>, /* D12, also MISO */
99 current-speed = <115200>;
100 pinctrl-0 = <&uart0_rx_default &uart0_tx_default>;
101 pinctrl-names = "default";
108 compatible = "issi,is25lp128", "jedec,spi-nor";
111 jedec-id = [96 60 18];
113 spi-max-frequency = <133000000>;
119 pinctrl-0 = <&spi1_cs0_default &spi1_cs2_default &spi1_cs3_default
121 pinctrl-names = "default";
134 pinctrl-0 = <&pwm1_1_default &pwm1_2_default &pwm1_3_default>;
135 pinctrl-names = "default";
140 pinctrl-0 = <&pwm2_1_default &pwm2_2_default &pwm2_3_default>;
141 pinctrl-names = "default";
146 clock-frequency = <100000>;
147 pinctrl-0 = <&i2c0_0_default &i2c0_1_default>;
148 pinctrl-names = "default";