CONFIG_REQUIRES_FULL_LIBC=y

# CPP library
CONFIG_CPP=y

# Disable TCP and IPv4 (TCP disabled to avoid heavy traffic)
CONFIG_NET_TCP=n
CONFIG_NET_IPV4=n

CONFIG_NET_IPV6_NBR_CACHE=n
CONFIG_NET_IPV6_MLD=n
CONFIG_NET_CONFIG_NEED_IPV4=n
CONFIG_NET_CONFIG_MY_IPV4_ADDR=""
CONFIG_NET_CONFIG_PEER_IPV4_ADDR=""

CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=8192
CONFIG_MAIN_STACK_SIZE=32768
CONFIG_INIT_STACKS=y

# Enable OpenThread shell
CONFIG_SHELL=y
CONFIG_OPENTHREAD_SHELL=y
CONFIG_SHELL_STACK_SIZE=8192

CONFIG_NET_L2_OPENTHREAD=y

# Use NVS as settings backend
CONFIG_NVS=y

# Enable Openthread rcp host
CONFIG_HDLC_RCP_IF=y

# Enable OpenThread features set
CONFIG_OPENTHREAD_THREAD_STACK_SIZE=8192
CONFIG_OPENTHREAD_THREAD_VERSION_1_3=y
#CONFIG_OPENTHREAD_DEBUG=y
#CONFIG_OPENTHREAD_L2_DEBUG=y
#CONFIG_OPENTHREAD_L2_LOG_LEVEL_INF=y

# mbedTLS tweaks
CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN=768

# A sample configuration to enable Thread Joiner, uncomment if needed
CONFIG_OPENTHREAD_JOINER=y

# Enable diagnostic module, uncomment if needed
#CONFIG_OPENTHREAD_DIAG=y

# To have OTBR On-Mesh address assigned (fd11:22:0:0:)
CONFIG_OPENTHREAD_SLAAC=y

# Setup the communication to echo-server
CONFIG_NET_CONFIG_PEER_IPV6_ADDR="fd11:db8:1::1"
CONFIG_NET_CONFIG_INIT_TIMEOUT=60

# Configure the OpenThread manually
CONFIG_OPENTHREAD_MANUAL_START=y

CONFIG_EVENTS=y