CONFIG_IPC_SERVICE=y
CONFIG_MBOX=y

CONFIG_ISR_STACK_SIZE=1024
CONFIG_IDLE_STACK_SIZE=256
CONFIG_MAIN_STACK_SIZE=512
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=512
CONFIG_HEAP_MEM_POOL_SIZE=4096

CONFIG_BT=y
CONFIG_BT_HCI_RAW=y

# Workaround: Unable to allocate command buffer when using K_NO_WAIT since
# Host number of completed commands does not follow normal flow control.
CONFIG_BT_BUF_CMD_TX_COUNT=10

# Host and Controller common dependencies
CONFIG_BT_BROADCASTER=y
CONFIG_BT_OBSERVER=n
CONFIG_BT_EXT_ADV=y
CONFIG_BT_PER_ADV=y
CONFIG_BT_ISO_BROADCASTER=y
CONFIG_BT_CENTRAL=n
CONFIG_BT_PERIPHERAL=n

# ISO Streams
CONFIG_BT_ISO_MAX_CHAN=4
# In theory, CONFIG_BT_ISO_TX_BUF_COUNT=1, should be sufficient but this count
# is used in the context of IPC which falls into a "Newton's Cradle" effect
# where probably (CONFIG_BT_CTLR_ISO_TX_BUFFERS - CONFIG_BT_ISO_TX_BUF_COUNT)
# buffers get throttled. Hence, always have the value equal or greater.
CONFIG_BT_ISO_TX_BUF_COUNT=12
CONFIG_BT_ISO_RX_BUF_COUNT=1

# ISO Broadcast Controller
CONFIG_BT_LL_SW_SPLIT=y
CONFIG_BT_CTLR_ADV_PERIODIC=y
CONFIG_BT_CTLR_ADV_DATA_LEN_MAX=191
CONFIG_BT_CTLR_ADV_ISO=y
CONFIG_BT_CTLR_ADV_ISO_SET=2
CONFIG_BT_CTLR_ADV_ISO_STREAM_COUNT=4
CONFIG_BT_CTLR_ADV_ISO_STREAM_MAX=2
CONFIG_BT_CTLR_ADV_ISO_PDU_LEN_MAX=247
CONFIG_BT_CTLR_ISOAL_SOURCES=4

CONFIG_BT_CTLR_ISO_TX_BUFFERS=12
CONFIG_BT_CTLR_ISO_TX_BUFFER_SIZE=255

CONFIG_BT_CTLR_ADVANCED_FEATURES=y
CONFIG_BT_CTLR_ADV_RESERVE_MAX=n