description: TI LP5562 LED

compatible: "ti,lp5562"

include: i2c-device.yaml

properties:
  red-output-current:
    type: int
    default: 175
    description: Output current of red channel in 0.1 mA (0-25.5 mA).
                 Default value is the power-on default. Valid range = 0 - 255
  green-output-current:
    type: int
    default: 175
    description: Output current of green channel in 0.1 mA (0-25.5 mA)
                 Default value is the power-on default. Valid range = 0 - 255
  blue-output-current:
    type: int
    default: 175
    description: Output current of blue channel in 0.1 mA (0-25.5 mA)
                 Default value is the power-on default. Valid range = 0 - 255
  white-output-current:
    type: int
    default: 175
    description: Output current of white channel in 0.1 mA (0-25.5 mA)
                 Default value is the power-on default. Valid range = 0 - 255

  enable-gpios:
    type: phandle-array
    description: |
      GPIO to enable LP5562 (both Charge-pump and Digital Communications interface).
      If not provided, user must ensure enable pin is already asserted externally (e.g:
      pull-up resistor).
