# Zephyr Bluetooth Controller
CONFIG_BT_LL_SW_SPLIT=y

# Zephyr Bluetooth LE Controller needs 16 event buffers to generate Extended
# Advertising Report for receiving the complete 1650 bytes of data
CONFIG_BT_BUF_EVT_RX_COUNT=16

# Set maximum scan data length for Extended Scanning in Bluetooth LE Controller
CONFIG_BT_CTLR_SCAN_DATA_LEN_MAX=1650

# Increase Zephyr Bluetooth LE Controller Rx buffer to receive complete chain
# of PDUs
CONFIG_BT_CTLR_RX_BUFFERS=9

# Sufficient ISO SDU and PDU length for this sample with ISO_TX_MTU of 247
CONFIG_BT_CTLR_CONN_ISO_SDU_LEN_MAX=247
CONFIG_BT_CTLR_CONN_ISO_PDU_LEN_MAX=251

# Number of supported streami sources and sinks
CONFIG_BT_CTLR_ISOAL_SOURCES=2
CONFIG_BT_CTLR_ISOAL_SINKS=1

# Support the highest SDU size required by this sample 247 + 8 bytes of HCI ISO Data
# packet overhead (timestamp and HCI ISO Data packet header)
CONFIG_BT_CTLR_ISO_TX_BUFFER_SIZE=255
CONFIG_BT_CTLR_ISO_TX_BUFFERS=4

# Use Low Latency Connected ISO policy
CONFIG_BT_CTLR_ADVANCED_FEATURES=y
CONFIG_BT_CTLR_CONN_ISO_LOW_LATENCY_POLICY=y

# Use the below if the sample is sending stale packet sequence number
# CONFIG_BT_CTLR_ISOAL_SN_STRICT=n