Microsoft's Azure RTOS ThreadX for Cortex-M55 Using the IAR Tools 1. Building the ThreadX run-time Library Import all ThreadX common and port-specific source files into an IAR project. Configure the project to build a library rather than an executable. This results in the ThreadX run-time library file tx.a, which is needed by the application. Files tx_thread_stack_error_handler.c and tx_thread_stack_error_notify.c replace the common files of the same name. 2. Demonstration System No demonstration is provided because the IAR EWARM 8.50 simulator does not simulate the Cortex-M55 correctly. 3. System Initialization The entry point in ThreadX for the Cortex-M55 using IAR tools is at label __iar_program_start. This is defined within the IAR compiler's startup code. In addition, this is where all static and global preset C variable initialization processing takes place. The ThreadX tx_initialize_low_level.s file is responsible for setting up various system data structures, and a periodic timer interrupt source. The _tx_initialize_low_level function inside of tx_initialize_low_level.s also determines the first available address for use by the application, which is supplied as the sole input parameter to your application definition function, tx_application_define. To accomplish this, a section is created in tx_initialize_low_level.s called FREE_MEM, which must be located after all other RAM sections in memory. 4. Register Usage and Stack Frames The following defines the saved context stack frames for context switches that occur as a result of interrupt handling or from thread-level API calls. All suspended threads have the same stack frame in the Cortex-M55 version of ThreadX. The top of the suspended thread's stack is pointed to by tx_thread_stack_ptr in the associated thread control block TX_THREAD. Non-FPU Stack Frame: Stack Offset Stack Contents 0x00 LR Interrupted LR (LR at time of PENDSV) 0x04 r4 Software stacked GP registers 0x08 r5 0x0C r6 0x10 r7 0x14 r8 0x18 r9 0x1C r10 0x20 r11 0x24 r0 Hardware stacked registers 0x28 r1 0x2C r2 0x30 r3 0x34 r12 0x38 lr 0x3C pc 0x40 xPSR FPU Stack Frame (only interrupted thread with FPU enabled): Stack Offset Stack Contents 0x00 LR Interrupted LR (LR at time of PENDSV) 0x04 s16 Software stacked FPU registers 0x08 s17 0x0C s18 0x10 s19 0x14 s20 0x18 s21 0x1C s22 0x20 s23 0x24 s24 0x28 s25 0x2C s26 0x30 s27 0x34 s28 0x38 s29 0x3C s30 0x40 s31 0x44 r4 Software stacked registers 0x48 r5 0x4C r6 0x50 r7 0x54 r8 0x58 r9 0x5C r10 0x60 r11 0x64 r0 Hardware stacked registers 0x68 r1 0x6C r2 0x70 r3 0x74 r12 0x78 lr 0x7C pc 0x80 xPSR 0x84 s0 Hardware stacked FPU registers 0x88 s1 0x8C s2 0x90 s3 0x94 s4 0x98 s5 0x9C s6 0xA0 s7 0xA4 s8 0xA8 s9 0xAC s10 0xB0 s11 0xB4 s12 0xB8 s13 0xBC s14 0xC0 s15 0xC4 fpscr 5. Improving Performance To make ThreadX and the application(s) run faster, you can enable all compiler optimizations. In addition, you can eliminate the ThreadX basic API error checking by compiling your application code with the symbol TX_DISABLE_ERROR_CHECKING defined. 6. Interrupt Handling The Cortex-M55 vectors start at the label __vector_table and is typically defined in a startup.s file (or similar). The application may modify the vector area according to its needs. 6.1 Managed Interrupts ISRs for Cortex-M using the IAR tools can be written completely in C (or assembly language) without any calls to _tx_thread_context_save or _tx_thread_context_restore. These ISRs are allowed access to the ThreadX API that is available to ISRs. ISRs written in C will take the form (where "your_C_isr" is an entry in the vector table): void your_C_isr(void) { /* ISR processing goes here, including any needed function calls. */ } ISRs written in assembly language will take the form: PUBLIC your_assembly_isr your_assembly_isr: PUSH {r0, lr} ; ISR processing goes here, including any needed function calls. POP {r0, lr} BX lr 7. IAR Thread-safe Library Support Thread-safe support for the IAR tools is easily enabled by building the ThreadX library and the application with TX_ENABLE_IAR_LIBRARY_SUPPORT. Also, the linker control file should have the following line added (if not already in place): initialize by copy with packing = none { section __DLIB_PERTHREAD }; // Required in a multi-threaded application 7. IAR Thread-safe Library Support Thread-safe support for the IAR tools is easily enabled by building the ThreadX library and the application with TX_ENABLE_IAR_LIBRARY_SUPPORT. Also, the linker control file should have the following line added (if not already in place): initialize by copy with packing = none { section __DLIB_PERTHREAD }; // Required in a multi-threaded application The project options "General Options -> Library Configuration" should also have the "Enable thread support in library" box selected. 8. VFP Support ThreadX for Cortex-M55 supports automatic ("lazy") VFP support, which means that applications threads can simply use the VFP and ThreadX automatically maintains the VFP registers as part of the thread context. 9. Revision History For generic code revision information, please refer to the readme_threadx_generic.txt file, which is included in your distribution. The following details the revision information associated with this specific port of ThreadX: 06-02-2021 Release 6.1.7 changes: tx_thread_secure_stack_initialize.s New file tx_thread_schedule.s Added secure stack initialize to SVC hander tx_thread_secure_stack.c Fixed stack pointer save, initialize in handler mode 04-02-2021 Release 6.1.6 changes: tx_port.h Updated macro definition tx_thread_schedule.s Added low power support 03-02-2021 The following files were changed/added for version 6.1.5: tx_port.h Added ULONG64_DEFINED 09-30-2020 Initial ThreadX 6.1 version for Cortex-M55 using IAR's ARM tools. Copyright(c) 1996-2020 Microsoft Corporation https://azure.com/rtos