1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Microchip CoreI2C I2C controller driver
4 *
5 * Copyright (c) 2018-2022 Microchip Corporation. All rights reserved.
6 *
7 * Author: Daire McNamara <daire.mcnamara@microchip.com>
8 * Author: Conor Dooley <conor.dooley@microchip.com>
9 */
10 #include <linux/clk.h>
11 #include <linux/clkdev.h>
12 #include <linux/err.h>
13 #include <linux/i2c.h>
14 #include <linux/interrupt.h>
15 #include <linux/io.h>
16 #include <linux/kernel.h>
17 #include <linux/module.h>
18 #include <linux/platform_device.h>
19
20 #define CORE_I2C_CTRL (0x00)
21 #define CTRL_CR0 BIT(0)
22 #define CTRL_CR1 BIT(1)
23 #define CTRL_AA BIT(2)
24 #define CTRL_SI BIT(3)
25 #define CTRL_STO BIT(4)
26 #define CTRL_STA BIT(5)
27 #define CTRL_ENS1 BIT(6)
28 #define CTRL_CR2 BIT(7)
29
30 #define STATUS_BUS_ERROR (0x00)
31 #define STATUS_M_START_SENT (0x08)
32 #define STATUS_M_REPEATED_START_SENT (0x10)
33 #define STATUS_M_SLAW_ACK (0x18)
34 #define STATUS_M_SLAW_NACK (0x20)
35 #define STATUS_M_TX_DATA_ACK (0x28)
36 #define STATUS_M_TX_DATA_NACK (0x30)
37 #define STATUS_M_ARB_LOST (0x38)
38 #define STATUS_M_SLAR_ACK (0x40)
39 #define STATUS_M_SLAR_NACK (0x48)
40 #define STATUS_M_RX_DATA_ACKED (0x50)
41 #define STATUS_M_RX_DATA_NACKED (0x58)
42 #define STATUS_S_SLAW_ACKED (0x60)
43 #define STATUS_S_ARB_LOST_SLAW_ACKED (0x68)
44 #define STATUS_S_GENERAL_CALL_ACKED (0x70)
45 #define STATUS_S_ARB_LOST_GENERAL_CALL_ACKED (0x78)
46 #define STATUS_S_RX_DATA_ACKED (0x80)
47 #define STATUS_S_RX_DATA_NACKED (0x88)
48 #define STATUS_S_GENERAL_CALL_RX_DATA_ACKED (0x90)
49 #define STATUS_S_GENERAL_CALL_RX_DATA_NACKED (0x98)
50 #define STATUS_S_RX_STOP (0xA0)
51 #define STATUS_S_SLAR_ACKED (0xA8)
52 #define STATUS_S_ARB_LOST_SLAR_ACKED (0xB0)
53 #define STATUS_S_TX_DATA_ACK (0xB8)
54 #define STATUS_S_TX_DATA_NACK (0xC0)
55 #define STATUS_LAST_DATA_ACK (0xC8)
56 #define STATUS_M_SMB_MASTER_RESET (0xD0)
57 #define STATUS_S_SCL_LOW_TIMEOUT (0xD8) /* 25 ms */
58 #define STATUS_NO_STATE_INFO (0xF8)
59
60 #define CORE_I2C_STATUS (0x04)
61 #define CORE_I2C_DATA (0x08)
62 #define WRITE_BIT (0x0)
63 #define READ_BIT (0x1)
64 #define SLAVE_ADDR_SHIFT (1)
65 #define CORE_I2C_SLAVE0_ADDR (0x0c)
66 #define GENERAL_CALL_BIT (0x0)
67 #define CORE_I2C_SMBUS (0x10)
68 #define SMBALERT_INT_ENB (0x0)
69 #define SMBSUS_INT_ENB (0x1)
70 #define SMBUS_ENB (0x2)
71 #define SMBALERT_NI_STATUS (0x3)
72 #define SMBALERT_NO_CTRL (0x4)
73 #define SMBSUS_NI_STATUS (0x5)
74 #define SMBSUS_NO_CTRL (0x6)
75 #define SMBUS_RESET (0x7)
76 #define CORE_I2C_FREQ (0x14)
77 #define CORE_I2C_GLITCHREG (0x18)
78 #define CORE_I2C_SLAVE1_ADDR (0x1c)
79
80 #define PCLK_DIV_960 (CTRL_CR2)
81 #define PCLK_DIV_256 (0)
82 #define PCLK_DIV_224 (CTRL_CR0)
83 #define PCLK_DIV_192 (CTRL_CR1)
84 #define PCLK_DIV_160 (CTRL_CR0 | CTRL_CR1)
85 #define PCLK_DIV_120 (CTRL_CR0 | CTRL_CR2)
86 #define PCLK_DIV_60 (CTRL_CR1 | CTRL_CR2)
87 #define BCLK_DIV_8 (CTRL_CR0 | CTRL_CR1 | CTRL_CR2)
88 #define CLK_MASK (CTRL_CR0 | CTRL_CR1 | CTRL_CR2)
89
90 /**
91 * struct mchp_corei2c_dev - Microchip CoreI2C device private data
92 *
93 * @base: pointer to register struct
94 * @dev: device reference
95 * @i2c_clk: clock reference for i2c input clock
96 * @buf: pointer to msg buffer for easier use
97 * @msg_complete: xfer completion object
98 * @adapter: core i2c abstraction
99 * @msg_err: error code for completed message
100 * @bus_clk_rate: current i2c bus clock rate
101 * @isr_status: cached copy of local ISR status
102 * @msg_len: number of bytes transferred in msg
103 * @addr: address of the current slave
104 */
105 struct mchp_corei2c_dev {
106 void __iomem *base;
107 struct device *dev;
108 struct clk *i2c_clk;
109 u8 *buf;
110 struct completion msg_complete;
111 struct i2c_adapter adapter;
112 int msg_err;
113 u32 bus_clk_rate;
114 u32 isr_status;
115 u16 msg_len;
116 u8 addr;
117 };
118
mchp_corei2c_core_disable(struct mchp_corei2c_dev * idev)119 static void mchp_corei2c_core_disable(struct mchp_corei2c_dev *idev)
120 {
121 u8 ctrl = readb(idev->base + CORE_I2C_CTRL);
122
123 ctrl &= ~CTRL_ENS1;
124 writeb(ctrl, idev->base + CORE_I2C_CTRL);
125 }
126
mchp_corei2c_core_enable(struct mchp_corei2c_dev * idev)127 static void mchp_corei2c_core_enable(struct mchp_corei2c_dev *idev)
128 {
129 u8 ctrl = readb(idev->base + CORE_I2C_CTRL);
130
131 ctrl |= CTRL_ENS1;
132 writeb(ctrl, idev->base + CORE_I2C_CTRL);
133 }
134
mchp_corei2c_reset(struct mchp_corei2c_dev * idev)135 static void mchp_corei2c_reset(struct mchp_corei2c_dev *idev)
136 {
137 mchp_corei2c_core_disable(idev);
138 mchp_corei2c_core_enable(idev);
139 }
140
mchp_corei2c_stop(struct mchp_corei2c_dev * idev)141 static inline void mchp_corei2c_stop(struct mchp_corei2c_dev *idev)
142 {
143 u8 ctrl = readb(idev->base + CORE_I2C_CTRL);
144
145 ctrl |= CTRL_STO;
146 writeb(ctrl, idev->base + CORE_I2C_CTRL);
147 }
148
mchp_corei2c_set_divisor(u32 rate,struct mchp_corei2c_dev * idev)149 static inline int mchp_corei2c_set_divisor(u32 rate,
150 struct mchp_corei2c_dev *idev)
151 {
152 u8 clkval, ctrl;
153
154 if (rate >= 960)
155 clkval = PCLK_DIV_960;
156 else if (rate >= 256)
157 clkval = PCLK_DIV_256;
158 else if (rate >= 224)
159 clkval = PCLK_DIV_224;
160 else if (rate >= 192)
161 clkval = PCLK_DIV_192;
162 else if (rate >= 160)
163 clkval = PCLK_DIV_160;
164 else if (rate >= 120)
165 clkval = PCLK_DIV_120;
166 else if (rate >= 60)
167 clkval = PCLK_DIV_60;
168 else if (rate >= 8)
169 clkval = BCLK_DIV_8;
170 else
171 return -EINVAL;
172
173 ctrl = readb(idev->base + CORE_I2C_CTRL);
174 ctrl &= ~CLK_MASK;
175 ctrl |= clkval;
176 writeb(ctrl, idev->base + CORE_I2C_CTRL);
177
178 ctrl = readb(idev->base + CORE_I2C_CTRL);
179 if ((ctrl & CLK_MASK) != clkval)
180 return -EIO;
181
182 return 0;
183 }
184
mchp_corei2c_init(struct mchp_corei2c_dev * idev)185 static int mchp_corei2c_init(struct mchp_corei2c_dev *idev)
186 {
187 u32 clk_rate = clk_get_rate(idev->i2c_clk);
188 u32 divisor = clk_rate / idev->bus_clk_rate;
189 int ret;
190
191 ret = mchp_corei2c_set_divisor(divisor, idev);
192 if (ret)
193 return ret;
194
195 mchp_corei2c_reset(idev);
196
197 return 0;
198 }
199
mchp_corei2c_empty_rx(struct mchp_corei2c_dev * idev)200 static void mchp_corei2c_empty_rx(struct mchp_corei2c_dev *idev)
201 {
202 u8 ctrl;
203
204 if (idev->msg_len > 0) {
205 *idev->buf++ = readb(idev->base + CORE_I2C_DATA);
206 idev->msg_len--;
207 }
208
209 if (idev->msg_len <= 1) {
210 ctrl = readb(idev->base + CORE_I2C_CTRL);
211 ctrl &= ~CTRL_AA;
212 writeb(ctrl, idev->base + CORE_I2C_CTRL);
213 }
214 }
215
mchp_corei2c_fill_tx(struct mchp_corei2c_dev * idev)216 static int mchp_corei2c_fill_tx(struct mchp_corei2c_dev *idev)
217 {
218 if (idev->msg_len > 0)
219 writeb(*idev->buf++, idev->base + CORE_I2C_DATA);
220 idev->msg_len--;
221
222 return 0;
223 }
224
mchp_corei2c_handle_isr(struct mchp_corei2c_dev * idev)225 static irqreturn_t mchp_corei2c_handle_isr(struct mchp_corei2c_dev *idev)
226 {
227 u32 status = idev->isr_status;
228 u8 ctrl;
229 bool last_byte = false, finished = false;
230
231 if (!idev->buf)
232 return IRQ_NONE;
233
234 switch (status) {
235 case STATUS_M_START_SENT:
236 case STATUS_M_REPEATED_START_SENT:
237 ctrl = readb(idev->base + CORE_I2C_CTRL);
238 ctrl &= ~CTRL_STA;
239 writeb(idev->addr, idev->base + CORE_I2C_DATA);
240 writeb(ctrl, idev->base + CORE_I2C_CTRL);
241 if (idev->msg_len == 0)
242 finished = true;
243 break;
244 case STATUS_M_ARB_LOST:
245 idev->msg_err = -EAGAIN;
246 finished = true;
247 break;
248 case STATUS_M_SLAW_ACK:
249 case STATUS_M_TX_DATA_ACK:
250 if (idev->msg_len > 0)
251 mchp_corei2c_fill_tx(idev);
252 else
253 last_byte = true;
254 break;
255 case STATUS_M_TX_DATA_NACK:
256 case STATUS_M_SLAR_NACK:
257 case STATUS_M_SLAW_NACK:
258 idev->msg_err = -ENXIO;
259 last_byte = true;
260 break;
261 case STATUS_M_SLAR_ACK:
262 ctrl = readb(idev->base + CORE_I2C_CTRL);
263 if (idev->msg_len == 1u) {
264 ctrl &= ~CTRL_AA;
265 writeb(ctrl, idev->base + CORE_I2C_CTRL);
266 } else {
267 ctrl |= CTRL_AA;
268 writeb(ctrl, idev->base + CORE_I2C_CTRL);
269 }
270 if (idev->msg_len < 1u)
271 last_byte = true;
272 break;
273 case STATUS_M_RX_DATA_ACKED:
274 mchp_corei2c_empty_rx(idev);
275 break;
276 case STATUS_M_RX_DATA_NACKED:
277 mchp_corei2c_empty_rx(idev);
278 if (idev->msg_len == 0)
279 last_byte = true;
280 break;
281 default:
282 break;
283 }
284
285 /* On the last byte to be transmitted, send STOP */
286 if (last_byte)
287 mchp_corei2c_stop(idev);
288
289 if (last_byte || finished)
290 complete(&idev->msg_complete);
291
292 return IRQ_HANDLED;
293 }
294
mchp_corei2c_isr(int irq,void * _dev)295 static irqreturn_t mchp_corei2c_isr(int irq, void *_dev)
296 {
297 struct mchp_corei2c_dev *idev = _dev;
298 irqreturn_t ret = IRQ_NONE;
299 u8 ctrl;
300
301 ctrl = readb(idev->base + CORE_I2C_CTRL);
302 if (ctrl & CTRL_SI) {
303 idev->isr_status = readb(idev->base + CORE_I2C_STATUS);
304 ret = mchp_corei2c_handle_isr(idev);
305 }
306
307 ctrl = readb(idev->base + CORE_I2C_CTRL);
308 ctrl &= ~CTRL_SI;
309 writeb(ctrl, idev->base + CORE_I2C_CTRL);
310
311 return ret;
312 }
313
mchp_corei2c_xfer_msg(struct mchp_corei2c_dev * idev,struct i2c_msg * msg)314 static int mchp_corei2c_xfer_msg(struct mchp_corei2c_dev *idev,
315 struct i2c_msg *msg)
316 {
317 u8 ctrl;
318 unsigned long time_left;
319
320 idev->addr = i2c_8bit_addr_from_msg(msg);
321 idev->msg_len = msg->len;
322 idev->buf = msg->buf;
323 idev->msg_err = 0;
324
325 reinit_completion(&idev->msg_complete);
326
327 mchp_corei2c_core_enable(idev);
328
329 ctrl = readb(idev->base + CORE_I2C_CTRL);
330 ctrl |= CTRL_STA;
331 writeb(ctrl, idev->base + CORE_I2C_CTRL);
332
333 time_left = wait_for_completion_timeout(&idev->msg_complete,
334 idev->adapter.timeout);
335 if (!time_left)
336 return -ETIMEDOUT;
337
338 return idev->msg_err;
339 }
340
mchp_corei2c_xfer(struct i2c_adapter * adap,struct i2c_msg * msgs,int num)341 static int mchp_corei2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
342 int num)
343 {
344 struct mchp_corei2c_dev *idev = i2c_get_adapdata(adap);
345 int i, ret;
346
347 for (i = 0; i < num; i++) {
348 ret = mchp_corei2c_xfer_msg(idev, msgs++);
349 if (ret)
350 return ret;
351 }
352
353 return num;
354 }
355
mchp_corei2c_func(struct i2c_adapter * adap)356 static u32 mchp_corei2c_func(struct i2c_adapter *adap)
357 {
358 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
359 }
360
361 static const struct i2c_algorithm mchp_corei2c_algo = {
362 .master_xfer = mchp_corei2c_xfer,
363 .functionality = mchp_corei2c_func,
364 };
365
mchp_corei2c_probe(struct platform_device * pdev)366 static int mchp_corei2c_probe(struct platform_device *pdev)
367 {
368 struct mchp_corei2c_dev *idev;
369 struct resource *res;
370 int irq, ret;
371
372 idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
373 if (!idev)
374 return -ENOMEM;
375
376 idev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
377 if (IS_ERR(idev->base))
378 return PTR_ERR(idev->base);
379
380 irq = platform_get_irq(pdev, 0);
381 if (irq < 0)
382 return irq;
383
384 idev->i2c_clk = devm_clk_get(&pdev->dev, NULL);
385 if (IS_ERR(idev->i2c_clk))
386 return dev_err_probe(&pdev->dev, PTR_ERR(idev->i2c_clk),
387 "missing clock\n");
388
389 idev->dev = &pdev->dev;
390 init_completion(&idev->msg_complete);
391
392 ret = device_property_read_u32(idev->dev, "clock-frequency",
393 &idev->bus_clk_rate);
394 if (ret || !idev->bus_clk_rate) {
395 dev_info(&pdev->dev, "default to 100kHz\n");
396 idev->bus_clk_rate = 100000;
397 }
398
399 if (idev->bus_clk_rate > 400000)
400 return dev_err_probe(&pdev->dev, -EINVAL,
401 "clock-frequency too high: %d\n",
402 idev->bus_clk_rate);
403
404 /*
405 * This driver supports both the hard peripherals & soft FPGA cores.
406 * The hard peripherals do not have shared IRQs, but we don't have
407 * control over what way the interrupts are wired for the soft cores.
408 */
409 ret = devm_request_irq(&pdev->dev, irq, mchp_corei2c_isr, IRQF_SHARED,
410 pdev->name, idev);
411 if (ret)
412 return dev_err_probe(&pdev->dev, ret,
413 "failed to claim irq %d\n", irq);
414
415 ret = clk_prepare_enable(idev->i2c_clk);
416 if (ret)
417 return dev_err_probe(&pdev->dev, ret,
418 "failed to enable clock\n");
419
420 ret = mchp_corei2c_init(idev);
421 if (ret) {
422 clk_disable_unprepare(idev->i2c_clk);
423 return dev_err_probe(&pdev->dev, ret, "failed to program clock divider\n");
424 }
425
426 i2c_set_adapdata(&idev->adapter, idev);
427 snprintf(idev->adapter.name, sizeof(idev->adapter.name),
428 "Microchip I2C hw bus at %08lx", (unsigned long)res->start);
429 idev->adapter.owner = THIS_MODULE;
430 idev->adapter.algo = &mchp_corei2c_algo;
431 idev->adapter.dev.parent = &pdev->dev;
432 idev->adapter.dev.of_node = pdev->dev.of_node;
433 idev->adapter.timeout = HZ;
434
435 platform_set_drvdata(pdev, idev);
436
437 ret = i2c_add_adapter(&idev->adapter);
438 if (ret) {
439 clk_disable_unprepare(idev->i2c_clk);
440 return ret;
441 }
442
443 dev_info(&pdev->dev, "registered CoreI2C bus driver\n");
444
445 return 0;
446 }
447
mchp_corei2c_remove(struct platform_device * pdev)448 static void mchp_corei2c_remove(struct platform_device *pdev)
449 {
450 struct mchp_corei2c_dev *idev = platform_get_drvdata(pdev);
451
452 clk_disable_unprepare(idev->i2c_clk);
453 i2c_del_adapter(&idev->adapter);
454 }
455
456 static const struct of_device_id mchp_corei2c_of_match[] = {
457 { .compatible = "microchip,mpfs-i2c" },
458 { .compatible = "microchip,corei2c-rtl-v7" },
459 {},
460 };
461 MODULE_DEVICE_TABLE(of, mchp_corei2c_of_match);
462
463 static struct platform_driver mchp_corei2c_driver = {
464 .probe = mchp_corei2c_probe,
465 .remove_new = mchp_corei2c_remove,
466 .driver = {
467 .name = "microchip-corei2c",
468 .of_match_table = mchp_corei2c_of_match,
469 },
470 };
471
472 module_platform_driver(mchp_corei2c_driver);
473
474 MODULE_DESCRIPTION("Microchip CoreI2C bus driver");
475 MODULE_AUTHOR("Daire McNamara <daire.mcnamara@microchip.com>");
476 MODULE_AUTHOR("Conor Dooley <conor.dooley@microchip.com>");
477 MODULE_LICENSE("GPL");
478
