1 /****************************************************************************
2
3 Copyright Echo Digital Audio Corporation (c) 1998 - 2004
4 All rights reserved
5 www.echoaudio.com
6
7 This file is part of Echo Digital Audio's generic driver library.
8
9 Echo Digital Audio's generic driver library is free software;
10 you can redistribute it and/or modify it under the terms of
11 the GNU General Public License as published by the Free Software
12 Foundation.
13
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
18
19 You should have received a copy of the GNU General Public License
20 along with this program; if not, write to the Free Software
21 Foundation, Inc., 59 Temple Place - Suite 330, Boston,
22 MA 02111-1307, USA.
23
24 ****************************************************************************
25
26 Translation from C++ and adaptation for use in ALSA-Driver
27 were made by Giuliano Pochini <pochini@shiny.it>
28
29 ****************************************************************************
30
31
32 Here's a block diagram of how most of the cards work:
33
34 +-----------+
35 record | |<-------------------- Inputs
36 <-------| | |
37 PCI | Transport | |
38 bus | engine | \|/
39 ------->| | +-------+
40 play | |--->|monitor|-------> Outputs
41 +-----------+ | mixer |
42 +-------+
43
44 The lines going to and from the PCI bus represent "pipes". A pipe performs
45 audio transport - moving audio data to and from buffers on the host via
46 bus mastering.
47
48 The inputs and outputs on the right represent input and output "busses."
49 A bus is a physical, real connection to the outside world. An example
50 of a bus would be the 1/4" analog connectors on the back of Layla or
51 an RCA S/PDIF connector.
52
53 For most cards, there is a one-to-one correspondence between outputs
54 and busses; that is, each individual pipe is hard-wired to a single bus.
55
56 Cards that work this way are Darla20, Gina20, Layla20, Darla24, Gina24,
57 Layla24, Mona, and Indigo.
58
59
60 Mia has a feature called "virtual outputs."
61
62
63 +-----------+
64 record | |<----------------------------- Inputs
65 <-------| | |
66 PCI | Transport | |
67 bus | engine | \|/
68 ------->| | +------+ +-------+
69 play | |-->|vmixer|-->|monitor|-------> Outputs
70 +-----------+ +------+ | mixer |
71 +-------+
72
73
74 Obviously, the difference here is the box labeled "vmixer." Vmixer is
75 short for "virtual output mixer." For Mia, pipes are *not* hard-wired
76 to a single bus; the vmixer lets you mix any pipe to any bus in any
77 combination.
78
79 Note, however, that the left-hand side of the diagram is unchanged.
80 Transport works exactly the same way - the difference is in the mixer stage.
81
82
83 Pipes and busses are numbered starting at zero.
84
85
86
87 Pipe index
88 ==========
89
90 A number of calls in CEchoGals refer to a "pipe index". A pipe index is
91 a unique number for a pipe that unambiguously refers to a playback or record
92 pipe. Pipe indices are numbered starting with analog outputs, followed by
93 digital outputs, then analog inputs, then digital inputs.
94
95 Take Gina24 as an example:
96
97 Pipe index
98
99 0-7 Analog outputs (0 .. FirstDigitalBusOut-1)
100 8-15 Digital outputs (FirstDigitalBusOut .. NumBussesOut-1)
101 16-17 Analog inputs
102 18-25 Digital inputs
103
104
105 You get the pipe index by calling CEchoGals::OpenAudio; the other transport
106 functions take the pipe index as a parameter. If you need a pipe index for
107 some other reason, use the handy Makepipe_index method.
108
109
110 Some calls take a CChannelMask parameter; CChannelMask is a handy way to
111 group pipe indices.
112
113
114
115 Digital mode switch
116 ===================
117
118 Some cards (right now, Gina24, Layla24, and Mona) have a Digital Mode Switch
119 or DMS. Cards with a DMS can be set to one of three mutually exclusive
120 digital modes: S/PDIF RCA, S/PDIF optical, or ADAT optical.
121
122 This may create some confusion since ADAT optical is 8 channels wide and
123 S/PDIF is only two channels wide. Gina24, Layla24, and Mona handle this
124 by acting as if they always have 8 digital outs and ins. If you are in
125 either S/PDIF mode, the last 6 channels don't do anything - data sent
126 out these channels is thrown away and you will always record zeros.
127
128 Note that with Gina24, Layla24, and Mona, sample rates above 50 kHz are
129 only available if you have the card configured for S/PDIF optical or S/PDIF
130 RCA.
131
132
133
134 Double speed mode
135 =================
136
137 Some of the cards support 88.2 kHz and 96 kHz sampling (Darla24, Gina24,
138 Layla24, Mona, Mia, and Indigo). For these cards, the driver sometimes has
139 to worry about "double speed mode"; double speed mode applies whenever the
140 sampling rate is above 50 kHz.
141
142 For instance, Mona and Layla24 support word clock sync. However, they
143 actually support two different word clock modes - single speed (below
144 50 kHz) and double speed (above 50 kHz). The hardware detects if a single
145 or double speed word clock signal is present; the generic code uses that
146 information to determine which mode to use.
147
148 The generic code takes care of all this for you.
149 */
150
151
152 #ifndef _ECHOAUDIO_H_
153 #define _ECHOAUDIO_H_
154
155
156 #include "echoaudio_dsp.h"
157
158
159
160 /***********************************************************************
161
162 PCI configuration space
163
164 ***********************************************************************/
165
166 /*
167 * PCI vendor ID and device IDs for the hardware
168 */
169 #define VENDOR_ID 0x1057
170 #define DEVICE_ID_56301 0x1801
171 #define DEVICE_ID_56361 0x3410
172 #define SUBVENDOR_ID 0xECC0
173
174
175 /*
176 * Valid Echo PCI subsystem card IDs
177 */
178 #define DARLA20 0x0010
179 #define GINA20 0x0020
180 #define LAYLA20 0x0030
181 #define DARLA24 0x0040
182 #define GINA24 0x0050
183 #define LAYLA24 0x0060
184 #define MONA 0x0070
185 #define MIA 0x0080
186 #define INDIGO 0x0090
187 #define INDIGO_IO 0x00a0
188 #define INDIGO_DJ 0x00b0
189 #define DC8 0x00c0
190 #define INDIGO_IOX 0x00d0
191 #define INDIGO_DJX 0x00e0
192 #define ECHO3G 0x0100
193
194
195 /************************************************************************
196
197 Array sizes and so forth
198
199 ***********************************************************************/
200
201 /*
202 * Sizes
203 */
204 #define ECHO_MAXAUDIOINPUTS 32 /* Max audio input channels */
205 #define ECHO_MAXAUDIOOUTPUTS 32 /* Max audio output channels */
206 #define ECHO_MAXAUDIOPIPES 32 /* Max number of input and output
207 * pipes */
208 #define E3G_MAX_OUTPUTS 16
209 #define ECHO_MAXMIDIJACKS 1 /* Max MIDI ports */
210 #define ECHO_MIDI_QUEUE_SZ 512 /* Max MIDI input queue entries */
211 #define ECHO_MTC_QUEUE_SZ 32 /* Max MIDI time code input queue
212 * entries */
213
214 /*
215 * MIDI activity indicator timeout
216 */
217 #define MIDI_ACTIVITY_TIMEOUT_USEC 200000
218
219
220 /****************************************************************************
221
222 Clocks
223
224 *****************************************************************************/
225
226 /*
227 * Clock numbers
228 */
229 #define ECHO_CLOCK_INTERNAL 0
230 #define ECHO_CLOCK_WORD 1
231 #define ECHO_CLOCK_SUPER 2
232 #define ECHO_CLOCK_SPDIF 3
233 #define ECHO_CLOCK_ADAT 4
234 #define ECHO_CLOCK_ESYNC 5
235 #define ECHO_CLOCK_ESYNC96 6
236 #define ECHO_CLOCK_MTC 7
237 #define ECHO_CLOCK_NUMBER 8
238 #define ECHO_CLOCKS 0xffff
239
240 /*
241 * Clock bit numbers - used to report capabilities and whatever clocks
242 * are being detected dynamically.
243 */
244 #define ECHO_CLOCK_BIT_INTERNAL (1 << ECHO_CLOCK_INTERNAL)
245 #define ECHO_CLOCK_BIT_WORD (1 << ECHO_CLOCK_WORD)
246 #define ECHO_CLOCK_BIT_SUPER (1 << ECHO_CLOCK_SUPER)
247 #define ECHO_CLOCK_BIT_SPDIF (1 << ECHO_CLOCK_SPDIF)
248 #define ECHO_CLOCK_BIT_ADAT (1 << ECHO_CLOCK_ADAT)
249 #define ECHO_CLOCK_BIT_ESYNC (1 << ECHO_CLOCK_ESYNC)
250 #define ECHO_CLOCK_BIT_ESYNC96 (1 << ECHO_CLOCK_ESYNC96)
251 #define ECHO_CLOCK_BIT_MTC (1<<ECHO_CLOCK_MTC)
252
253
254 /***************************************************************************
255
256 Digital modes
257
258 ****************************************************************************/
259
260 /*
261 * Digital modes for Mona, Layla24, and Gina24
262 */
263 #define DIGITAL_MODE_NONE 0xFF
264 #define DIGITAL_MODE_SPDIF_RCA 0
265 #define DIGITAL_MODE_SPDIF_OPTICAL 1
266 #define DIGITAL_MODE_ADAT 2
267 #define DIGITAL_MODE_SPDIF_CDROM 3
268 #define DIGITAL_MODES 4
269
270 /*
271 * Digital mode capability masks
272 */
273 #define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA (1 << DIGITAL_MODE_SPDIF_RCA)
274 #define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL (1 << DIGITAL_MODE_SPDIF_OPTICAL)
275 #define ECHOCAPS_HAS_DIGITAL_MODE_ADAT (1 << DIGITAL_MODE_ADAT)
276 #define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_CDROM (1 << DIGITAL_MODE_SPDIF_CDROM)
277
278
279 #define EXT_3GBOX_NC 0x01 /* 3G box not connected */
280 #define EXT_3GBOX_NOT_SET 0x02 /* 3G box not detected yet */
281
282
283 #define ECHOGAIN_MUTED (-128) /* Minimum possible gain */
284 #define ECHOGAIN_MINOUT (-128) /* Min output gain (dB) */
285 #define ECHOGAIN_MAXOUT (6) /* Max output gain (dB) */
286 #define ECHOGAIN_MININP (-50) /* Min input gain (0.5 dB) */
287 #define ECHOGAIN_MAXINP (50) /* Max input gain (0.5 dB) */
288
289 #define PIPE_STATE_STOPPED 0 /* Pipe has been reset */
290 #define PIPE_STATE_PAUSED 1 /* Pipe has been stopped */
291 #define PIPE_STATE_STARTED 2 /* Pipe has been started */
292 #define PIPE_STATE_PENDING 3 /* Pipe has pending start */
293
294
295
296 struct audiopipe {
297 volatile __le32 *dma_counter; /* Commpage register that contains
298 * the current dma position
299 * (lower 32 bits only)
300 */
301 u32 last_period; /* Counter position last time a
302 * period elapsed
303 */
304 u32 last_counter; /* Used exclusively by pcm_pointer
305 * under PCM core locks.
306 * The last position, which is used
307 * to compute...
308 */
309 u32 position; /* ...the number of bytes tranferred
310 * by the DMA engine, modulo the
311 * buffer size
312 */
313 short index; /* Index of the first channel or <0
314 * if hw is not configured yet
315 */
316 short interleave;
317 struct snd_dma_buffer sgpage; /* Room for the scatter-gather list */
318 struct snd_pcm_hardware hw;
319 struct snd_pcm_hw_constraint_list constr;
320 short sglist_head;
321 char state; /* pipe state */
322 };
323
324
325 struct audioformat {
326 u8 interleave; /* How the data is arranged in memory:
327 * mono = 1, stereo = 2, ...
328 */
329 u8 bits_per_sample; /* 8, 16, 24, 32 (24 bits left aligned) */
330 char mono_to_stereo; /* Only used if interleave is 1 and
331 * if this is an output pipe.
332 */
333 char data_are_bigendian; /* 1 = big endian, 0 = little endian */
334 };
335
336
337 struct echoaudio {
338 spinlock_t lock;
339 struct snd_pcm_substream *substream[DSP_MAXPIPES];
340 struct mutex mode_mutex;
341 u16 num_digital_modes, digital_mode_list[6];
342 u16 num_clock_sources, clock_source_list[10];
343 unsigned int opencount; /* protected by mode_mutex */
344 struct snd_kcontrol *clock_src_ctl;
345 struct snd_pcm *analog_pcm, *digital_pcm;
346 struct snd_card *card;
347 const char *card_name;
348 struct pci_dev *pci;
349 unsigned long dsp_registers_phys;
350 struct resource *iores;
351 struct snd_dma_buffer commpage_dma_buf;
352 int irq;
353 #ifdef ECHOCARD_HAS_MIDI
354 struct snd_rawmidi *rmidi;
355 struct snd_rawmidi_substream *midi_in, *midi_out;
356 #endif
357 struct timer_list timer;
358 char tinuse; /* Timer in use */
359 char midi_full; /* MIDI output buffer is full */
360 char can_set_rate; /* protected by mode_mutex */
361 char rate_set; /* protected by mode_mutex */
362
363 /* This stuff is used mainly by the lowlevel code */
364 struct comm_page *comm_page; /* Virtual address of the memory
365 * seen by DSP
366 */
367 u32 pipe_alloc_mask; /* Bitmask of allocated pipes */
368 u32 pipe_cyclic_mask; /* Bitmask of pipes with cyclic
369 * buffers
370 */
371 u32 sample_rate; /* Card sample rate in Hz */
372 u8 digital_mode; /* Current digital mode
373 * (see DIGITAL_MODE_*)
374 */
375 u8 spdif_status; /* Gina20, Darla20, Darla24 - only */
376 u8 clock_state; /* Gina20, Darla20, Darla24 - only */
377 u8 input_clock; /* Currently selected sample clock
378 * source
379 */
380 u8 output_clock; /* Layla20 only */
381 char meters_enabled; /* VU-meters status */
382 char asic_loaded; /* Set true when ASIC loaded */
383 char bad_board; /* Set true if DSP won't load */
384 char professional_spdif; /* 0 = consumer; 1 = professional */
385 char non_audio_spdif; /* 3G - only */
386 char digital_in_automute; /* Gina24, Layla24, Mona - only */
387 char has_phantom_power;
388 char hasnt_input_nominal_level; /* Gina3G */
389 char phantom_power; /* Gina3G - only */
390 char has_midi;
391 char midi_input_enabled;
392
393 #ifdef ECHOCARD_ECHO3G
394 /* External module -dependent pipe and bus indexes */
395 char px_digital_out, px_analog_in, px_digital_in, px_num;
396 char bx_digital_out, bx_analog_in, bx_digital_in, bx_num;
397 #endif
398
399 char nominal_level[ECHO_MAXAUDIOPIPES]; /* True == -10dBV
400 * False == +4dBu */
401 s8 input_gain[ECHO_MAXAUDIOINPUTS]; /* Input level -50..+50
402 * unit is 0.5dB */
403 s8 output_gain[ECHO_MAXAUDIOOUTPUTS]; /* Output level -128..+6 dB
404 * (-128=muted) */
405 s8 monitor_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOINPUTS];
406 /* -128..+6 dB */
407 s8 vmixer_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOOUTPUTS];
408 /* -128..+6 dB */
409
410 u16 digital_modes; /* Bitmask of supported modes
411 * (see ECHOCAPS_HAS_DIGITAL_MODE_*) */
412 u16 input_clock_types; /* Suppoted input clock types */
413 u16 output_clock_types; /* Suppoted output clock types -
414 * Layla20 only */
415 u16 device_id, subdevice_id;
416 u16 *dsp_code; /* Current DSP code loaded,
417 * NULL if nothing loaded */
418 short dsp_code_to_load; /* DSP code to load */
419 short asic_code; /* Current ASIC code */
420 u32 comm_page_phys; /* Physical address of the
421 * memory seen by DSP */
422 u32 __iomem *dsp_registers; /* DSP's register base */
423 u32 active_mask; /* Chs. active mask or
424 * punks out */
425 #ifdef CONFIG_PM_SLEEP
426 const struct firmware *fw_cache[8]; /* Cached firmwares */
427 #endif
428
429 #ifdef ECHOCARD_HAS_MIDI
430 u16 mtc_state; /* State for MIDI input parsing state machine */
431 u8 midi_buffer[MIDI_IN_BUFFER_SIZE];
432 #endif
433 };
434
435
436 static int init_dsp_comm_page(struct echoaudio *chip);
437 static int init_line_levels(struct echoaudio *chip);
438 static int free_pipes(struct echoaudio *chip, struct audiopipe *pipe);
439 static int load_firmware(struct echoaudio *chip);
440 static int wait_handshake(struct echoaudio *chip);
441 static int send_vector(struct echoaudio *chip, u32 command);
442 static int get_firmware(const struct firmware **fw_entry,
443 struct echoaudio *chip, const short fw_index);
444 static void free_firmware(const struct firmware *fw_entry,
445 struct echoaudio *chip);
446
447 #ifdef ECHOCARD_HAS_MIDI
448 static int enable_midi_input(struct echoaudio *chip, char enable);
449 static void snd_echo_midi_output_trigger(
450 struct snd_rawmidi_substream *substream, int up);
451 static int midi_service_irq(struct echoaudio *chip);
452 static int snd_echo_midi_create(struct snd_card *card,
453 struct echoaudio *chip);
454 #endif
455
456
clear_handshake(struct echoaudio * chip)457 static inline void clear_handshake(struct echoaudio *chip)
458 {
459 chip->comm_page->handshake = 0;
460 }
461
get_dsp_register(struct echoaudio * chip,u32 index)462 static inline u32 get_dsp_register(struct echoaudio *chip, u32 index)
463 {
464 return readl(&chip->dsp_registers[index]);
465 }
466
set_dsp_register(struct echoaudio * chip,u32 index,u32 value)467 static inline void set_dsp_register(struct echoaudio *chip, u32 index,
468 u32 value)
469 {
470 writel(value, &chip->dsp_registers[index]);
471 }
472
473
474 /* Pipe and bus indexes. PX_* and BX_* are defined as chip->px_* and chip->bx_*
475 for 3G cards because they depend on the external box. They are integer
476 constants for all other cards.
477 Never use those defines directly, use the following functions instead. */
478
px_digital_out(const struct echoaudio * chip)479 static inline int px_digital_out(const struct echoaudio *chip)
480 {
481 return PX_DIGITAL_OUT;
482 }
483
px_analog_in(const struct echoaudio * chip)484 static inline int px_analog_in(const struct echoaudio *chip)
485 {
486 return PX_ANALOG_IN;
487 }
488
px_digital_in(const struct echoaudio * chip)489 static inline int px_digital_in(const struct echoaudio *chip)
490 {
491 return PX_DIGITAL_IN;
492 }
493
px_num(const struct echoaudio * chip)494 static inline int px_num(const struct echoaudio *chip)
495 {
496 return PX_NUM;
497 }
498
bx_digital_out(const struct echoaudio * chip)499 static inline int bx_digital_out(const struct echoaudio *chip)
500 {
501 return BX_DIGITAL_OUT;
502 }
503
bx_analog_in(const struct echoaudio * chip)504 static inline int bx_analog_in(const struct echoaudio *chip)
505 {
506 return BX_ANALOG_IN;
507 }
508
bx_digital_in(const struct echoaudio * chip)509 static inline int bx_digital_in(const struct echoaudio *chip)
510 {
511 return BX_DIGITAL_IN;
512 }
513
bx_num(const struct echoaudio * chip)514 static inline int bx_num(const struct echoaudio *chip)
515 {
516 return BX_NUM;
517 }
518
num_pipes_out(const struct echoaudio * chip)519 static inline int num_pipes_out(const struct echoaudio *chip)
520 {
521 return px_analog_in(chip);
522 }
523
num_pipes_in(const struct echoaudio * chip)524 static inline int num_pipes_in(const struct echoaudio *chip)
525 {
526 return px_num(chip) - px_analog_in(chip);
527 }
528
num_busses_out(const struct echoaudio * chip)529 static inline int num_busses_out(const struct echoaudio *chip)
530 {
531 return bx_analog_in(chip);
532 }
533
num_busses_in(const struct echoaudio * chip)534 static inline int num_busses_in(const struct echoaudio *chip)
535 {
536 return bx_num(chip) - bx_analog_in(chip);
537 }
538
num_analog_busses_out(const struct echoaudio * chip)539 static inline int num_analog_busses_out(const struct echoaudio *chip)
540 {
541 return bx_digital_out(chip);
542 }
543
num_analog_busses_in(const struct echoaudio * chip)544 static inline int num_analog_busses_in(const struct echoaudio *chip)
545 {
546 return bx_digital_in(chip) - bx_analog_in(chip);
547 }
548
num_digital_busses_out(const struct echoaudio * chip)549 static inline int num_digital_busses_out(const struct echoaudio *chip)
550 {
551 return num_busses_out(chip) - num_analog_busses_out(chip);
552 }
553
num_digital_busses_in(const struct echoaudio * chip)554 static inline int num_digital_busses_in(const struct echoaudio *chip)
555 {
556 return num_busses_in(chip) - num_analog_busses_in(chip);
557 }
558
559 /* The monitor array is a one-dimensional array; compute the offset
560 * into the array */
monitor_index(const struct echoaudio * chip,int out,int in)561 static inline int monitor_index(const struct echoaudio *chip, int out, int in)
562 {
563 return out * num_busses_in(chip) + in;
564 }
565
566 #endif /* _ECHOAUDIO_H_ */
567
