1 /* SPDX-License-Identifier: GPL-2.0 */ 2 3 #ifndef __842_H__ 4 #define __842_H__ 5 6 /* The 842 compressed format is made up of multiple blocks, each of 7 * which have the format: 8 * 9 * <template>[arg1][arg2][arg3][arg4] 10 * 11 * where there are between 0 and 4 template args, depending on the specific 12 * template operation. For normal operations, each arg is either a specific 13 * number of data bytes to add to the output buffer, or an index pointing 14 * to a previously-written number of data bytes to copy to the output buffer. 15 * 16 * The template code is a 5-bit value. This code indicates what to do with 17 * the following data. Template codes from 0 to 0x19 should use the template 18 * table, the static "decomp_ops" table used in decompress. For each template 19 * (table row), there are between 1 and 4 actions; each action corresponds to 20 * an arg following the template code bits. Each action is either a "data" 21 * type action, or a "index" type action, and each action results in 2, 4, or 8 22 * bytes being written to the output buffer. Each template (i.e. all actions 23 * in the table row) will add up to 8 bytes being written to the output buffer. 24 * Any row with less than 4 actions is padded with noop actions, indicated by 25 * N0 (for which there is no corresponding arg in the compressed data buffer). 26 * 27 * "Data" actions, indicated in the table by D2, D4, and D8, mean that the 28 * corresponding arg is 2, 4, or 8 bytes, respectively, in the compressed data 29 * buffer should be copied directly to the output buffer. 30 * 31 * "Index" actions, indicated in the table by I2, I4, and I8, mean the 32 * corresponding arg is an index parameter that points to, respectively, a 2, 33 * 4, or 8 byte value already in the output buffer, that should be copied to 34 * the end of the output buffer. Essentially, the index points to a position 35 * in a ring buffer that contains the last N bytes of output buffer data. 36 * The number of bits for each index's arg are: 8 bits for I2, 9 bits for I4, 37 * and 8 bits for I8. Since each index points to a 2, 4, or 8 byte section, 38 * this means that I2 can reference 512 bytes ((2^8 bits = 256) * 2 bytes), I4 39 * can reference 2048 bytes ((2^9 = 512) * 4 bytes), and I8 can reference 2048 40 * bytes ((2^8 = 256) * 8 bytes). Think of it as a kind-of ring buffer for 41 * each of I2, I4, and I8 that are updated for each byte written to the output 42 * buffer. In this implementation, the output buffer is directly used for each 43 * index; there is no additional memory required. Note that the index is into 44 * a ring buffer, not a sliding window; for example, if there have been 260 45 * bytes written to the output buffer, an I2 index of 0 would index to byte 256 46 * in the output buffer, while an I2 index of 16 would index to byte 16 in the 47 * output buffer. 48 * 49 * There are also 3 special template codes; 0x1b for "repeat", 0x1c for 50 * "zeros", and 0x1e for "end". The "repeat" operation is followed by a 6 bit 51 * arg N indicating how many times to repeat. The last 8 bytes written to the 52 * output buffer are written again to the output buffer, N + 1 times. The 53 * "zeros" operation, which has no arg bits, writes 8 zeros to the output 54 * buffer. The "end" operation, which also has no arg bits, signals the end 55 * of the compressed data. There may be some number of padding (don't care, 56 * but usually 0) bits after the "end" operation bits, to fill the buffer 57 * length to a specific byte multiple (usually a multiple of 8, 16, or 32 58 * bytes). 59 * 60 * This software implementation also uses one of the undefined template values, 61 * 0x1d as a special "short data" template code, to represent less than 8 bytes 62 * of uncompressed data. It is followed by a 3 bit arg N indicating how many 63 * data bytes will follow, and then N bytes of data, which should be copied to 64 * the output buffer. This allows the software 842 compressor to accept input 65 * buffers that are not an exact multiple of 8 bytes long. However, those 66 * compressed buffers containing this sw-only template will be rejected by 67 * the 842 hardware decompressor, and must be decompressed with this software 68 * library. The 842 software compression module includes a parameter to 69 * disable using this sw-only "short data" template, and instead simply 70 * reject any input buffer that is not a multiple of 8 bytes long. 71 * 72 * After all actions for each operation code are processed, another template 73 * code is in the next 5 bits. The decompression ends once the "end" template 74 * code is detected. 75 */ 76 77 #include <linux/module.h> 78 #include <linux/kernel.h> 79 #include <linux/bitops.h> 80 #include <linux/crc32.h> 81 #include <asm/unaligned.h> 82 83 #include <linux/sw842.h> 84 85 /* special templates */ 86 #define OP_REPEAT (0x1B) 87 #define OP_ZEROS (0x1C) 88 #define OP_END (0x1E) 89 90 /* sw only template - this is not in the hw design; it's used only by this 91 * software compressor and decompressor, to allow input buffers that aren't 92 * a multiple of 8. 93 */ 94 #define OP_SHORT_DATA (0x1D) 95 96 /* additional bits of each op param */ 97 #define OP_BITS (5) 98 #define REPEAT_BITS (6) 99 #define SHORT_DATA_BITS (3) 100 #define I2_BITS (8) 101 #define I4_BITS (9) 102 #define I8_BITS (8) 103 #define CRC_BITS (32) 104 105 #define REPEAT_BITS_MAX (0x3f) 106 #define SHORT_DATA_BITS_MAX (0x7) 107 108 /* Arbitrary values used to indicate action */ 109 #define OP_ACTION (0x70) 110 #define OP_ACTION_INDEX (0x10) 111 #define OP_ACTION_DATA (0x20) 112 #define OP_ACTION_NOOP (0x40) 113 #define OP_AMOUNT (0x0f) 114 #define OP_AMOUNT_0 (0x00) 115 #define OP_AMOUNT_2 (0x02) 116 #define OP_AMOUNT_4 (0x04) 117 #define OP_AMOUNT_8 (0x08) 118 119 #define D2 (OP_ACTION_DATA | OP_AMOUNT_2) 120 #define D4 (OP_ACTION_DATA | OP_AMOUNT_4) 121 #define D8 (OP_ACTION_DATA | OP_AMOUNT_8) 122 #define I2 (OP_ACTION_INDEX | OP_AMOUNT_2) 123 #define I4 (OP_ACTION_INDEX | OP_AMOUNT_4) 124 #define I8 (OP_ACTION_INDEX | OP_AMOUNT_8) 125 #define N0 (OP_ACTION_NOOP | OP_AMOUNT_0) 126 127 /* the max of the regular templates - not including the special templates */ 128 #define OPS_MAX (0x1a) 129 130 #endif 131
