| /Linux-v6.6/drivers/scsi/arm/ |
| D | cumana_1.c | 39 #define CTRL 0x16fc macro
53 writeb(0x02, base + CTRL); in cumanascsi_pwrite()
78 writeb(0x12, base + CTRL); in cumanascsi_pwrite()
104 writeb(hostdata->ctrl | 0x40, base + CTRL); in cumanascsi_pwrite()
120 writeb(0x00, base + CTRL); in cumanascsi_pread()
144 writeb(0x10, base + CTRL); in cumanascsi_pread()
170 writeb(hostdata->ctrl | 0x40, base + CTRL); in cumanascsi_pread()
189 writeb(0, base + CTRL); in cumanascsi_read()
194 writeb(0x40, base + CTRL); in cumanascsi_read()
204 writeb(0, base + CTRL); in cumanascsi_write()
[all …]
|
| /Linux-v6.6/drivers/net/ethernet/intel/e1000e/ |
| D | mac.c | 467 ctrl = er32(CTRL); in e1000e_check_for_fiber_link()
491 ctrl = er32(CTRL); in e1000e_check_for_fiber_link()
493 ew32(CTRL, ctrl); in e1000e_check_for_fiber_link()
509 ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); in e1000e_check_for_fiber_link()
532 ctrl = er32(CTRL); in e1000e_check_for_serdes_link()
554 ctrl = er32(CTRL); in e1000e_check_for_serdes_link()
556 ew32(CTRL, ctrl); in e1000e_check_for_serdes_link()
572 ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); in e1000e_check_for_serdes_link()
839 ctrl = er32(CTRL); in e1000e_setup_fiber_serdes_link()
858 ew32(CTRL, ctrl); in e1000e_setup_fiber_serdes_link()
[all …]
|
| D | 82571.c | 981 ctrl = er32(CTRL); in e1000_reset_hw_82571()
984 ew32(CTRL, ctrl | E1000_CTRL_RST); in e1000_reset_hw_82571()
1197 reg = er32(CTRL); in e1000_initialize_hw_bits_82571()
1199 ew32(CTRL, reg); in e1000_initialize_hw_bits_82571()
1427 ctrl = er32(CTRL); in e1000_setup_copper_link_82571()
1430 ew32(CTRL, ctrl); in e1000_setup_copper_link_82571()
1506 ctrl = er32(CTRL); in e1000_check_for_serdes_link_82571()
1539 ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); in e1000_check_for_serdes_link_82571()
1573 ew32(CTRL, ctrl); in e1000_check_for_serdes_link_82571()
1595 ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); in e1000_check_for_serdes_link_82571()
|
| D | ethtool.c | 459 regs_buff[0] = er32(CTRL); in e1000_get_regs()
1347 ctrl_reg = er32(CTRL); in e1000_integrated_phy_loopback()
1354 ew32(CTRL, ctrl_reg); in e1000_integrated_phy_loopback()
1426 ctrl_reg = er32(CTRL); in e1000_integrated_phy_loopback()
1447 ew32(CTRL, ctrl_reg); in e1000_integrated_phy_loopback()
1463 u32 ctrl = er32(CTRL); in e1000_set_82571_fiber_loopback()
1472 ew32(CTRL, ctrl); in e1000_set_82571_fiber_loopback()
1483 ctrl = er32(CTRL); in e1000_set_82571_fiber_loopback()
1485 ew32(CTRL, ctrl); in e1000_set_82571_fiber_loopback()
1503 u32 ctrl = er32(CTRL); in e1000_set_es2lan_mac_loopback()
[all …]
|
| D | 80003es2lan.c | 685 ctrl = er32(CTRL); in e1000_reset_hw_80003es2lan()
692 ew32(CTRL, ctrl | E1000_CTRL_RST); in e1000_reset_hw_80003es2lan()
1029 ctrl = er32(CTRL); in e1000_setup_copper_link_80003es2lan()
1032 ew32(CTRL, ctrl); in e1000_setup_copper_link_80003es2lan()
|
| /Linux-v6.6/drivers/net/ethernet/intel/e1000/ |
| D | e1000_hw.c | 409 ctrl = er32(CTRL); in e1000_reset_hw()
413 ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST)); in e1000_reset_hw()
435 E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST)); in e1000_reset_hw()
444 ew32(CTRL, (ctrl | E1000_CTRL_RST)); in e1000_reset_hw()
588 ctrl = er32(CTRL); in e1000_init_hw()
589 ew32(CTRL, ctrl | E1000_CTRL_PRIOR); in e1000_init_hw()
813 ctrl = er32(CTRL); in e1000_setup_fiber_serdes_link()
888 ew32(CTRL, ctrl); in e1000_setup_fiber_serdes_link()
902 (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) { in e1000_setup_fiber_serdes_link()
1007 ctrl = er32(CTRL); in e1000_copper_link_preconfig()
[all …]
|
| /Linux-v6.6/drivers/hwmon/ |
| D | as370-hwmon.c | 17 #define CTRL 0x0 macro
35 void __iomem *addr = hwmon->base + CTRL; in init_pvt()
|
| /Linux-v6.6/Documentation/translations/zh_CN/process/ |
| D | email-clients.rst | 88 当写邮件时，光标应该放在补丁会出现的地方，然后按下 :kbd:`CTRL-R` 组合键，使指
96 用 :menuselection:`Message-->Insert File` (:kbd:`CTRL-I`) 或外置编辑器插入补丁。
108 从 :menuselection:`格式-->段落样式-->预格式化` (:kbd:`CTRL-7`)
|
| /Linux-v6.6/Documentation/security/ |
| D | sak.rst | 28 What key sequence should you use? Well, CTRL-ALT-DEL is used to reboot
29 the machine. CTRL-ALT-BACKSPACE is magical to the X server. We'll
30 choose CTRL-ALT-PAUSE.
|
| /Linux-v6.6/sound/pci/ali5451/ |
| D | ali5451.c | 985 unsigned int CTRL, in snd_ali_write_voice_regs() argument
998 ((CTRL & 0x0000000f) << 12) | in snd_ali_write_voice_regs()
1046 unsigned int CTRL; in snd_ali_control_mode() local
1052 CTRL = 0x00000001; in snd_ali_control_mode()
1054 CTRL |= 0x00000008; /* 16-bit data */ in snd_ali_control_mode()
1056 CTRL |= 0x00000002; /* signed data */ in snd_ali_control_mode()
1058 CTRL |= 0x00000004; /* stereo data */ in snd_ali_control_mode()
1059 return CTRL; in snd_ali_control_mode()
1186 unsigned int CTRL; in snd_ali_playback_prepare() local
1225 CTRL = snd_ali_control_mode(substream); in snd_ali_playback_prepare()
[all …]
|
| /Linux-v6.6/drivers/i3c/master/ |
| D | i3c-master-cdns.c | 58 #define CTRL 0x10 macro
495 writel(readl(master->regs + CTRL) & ~CTRL_DEV_EN, master->regs + CTRL); in cdns_i3c_master_disable()
503 writel(readl(master->regs + CTRL) | CTRL_DEV_EN, master->regs + CTRL); in cdns_i3c_master_enable()
551 writel(readl(master->regs + CTRL) | CTRL_MCS, in cdns_i3c_master_start_xfer_locked()
552 master->regs + CTRL); in cdns_i3c_master_start_xfer_locked()
655 writel(readl(master->regs + CTRL) & ~CTRL_DEV_EN, in cdns_i3c_master_unqueue_xfer()
656 master->regs + CTRL); in cdns_i3c_master_unqueue_xfer()
665 writel(readl(master->regs + CTRL) | CTRL_DEV_EN, in cdns_i3c_master_unqueue_xfer()
666 master->regs + CTRL); in cdns_i3c_master_unqueue_xfer()
1110 ctrl = readl(master->regs + CTRL); in cdns_i3c_master_upd_i3c_scl_lim()
[all …]
|
| /Linux-v6.6/sound/pci/trident/ |
| D | trident_main.c | 440 ((voice->CTRL & 0x0000000f) << 12); in snd_trident_write_voice_regs()
579 outw((voice->CTRL << 12) | voice->Vol, in snd_trident_write_vol_reg()
750 unsigned int CTRL; in snd_trident_control_mode() local
756 CTRL = 0x00000001; in snd_trident_control_mode()
758 CTRL |= 0x00000008; // 16-bit data in snd_trident_control_mode()
760 CTRL |= 0x00000002; // signed data in snd_trident_control_mode()
762 CTRL |= 0x00000004; // stereo data in snd_trident_control_mode()
763 return CTRL; in snd_trident_control_mode()
928 voice->CTRL = snd_trident_control_mode(substream); in snd_trident_playback_prepare()
954 evoice->CTRL = voice->CTRL; in snd_trident_playback_prepare()
[all …]
|
| /Linux-v6.6/tools/testing/selftests/cgroup/ |
| D | test_cpuset_prs.sh | 353 CTRL=${CTRL:=$CONTROLLER}
369 COMM="echo ${PREFIX}${CTRL} > $SFILE"
|
| /Linux-v6.6/drivers/gpu/drm/vc4/ |
| D | vc4_dsi.c | 930 DSI_PORT_WRITE(CTRL, in vc4_dsi_bridge_pre_enable()
934 DSI_PORT_WRITE(CTRL, in vc4_dsi_bridge_pre_enable()
1095 DSI_PORT_WRITE(CTRL, in vc4_dsi_bridge_pre_enable()
1096 DSI_PORT_READ(CTRL) | in vc4_dsi_bridge_pre_enable()
1118 DSI_PORT_WRITE(CTRL, DSI_PORT_READ(CTRL) | DSI0_CTRL_CTRL0); in vc4_dsi_bridge_pre_enable()
1120 DSI_PORT_WRITE(CTRL, DSI_PORT_READ(CTRL) | DSI1_CTRL_EN); in vc4_dsi_bridge_pre_enable()
1333 DSI_PORT_WRITE(CTRL, in vc4_dsi_host_transfer()
1334 DSI_PORT_READ(CTRL) | in vc4_dsi_host_transfer()
|
| /Linux-v6.6/tools/perf/ui/browsers/ |
| D | header.c | 68 case CTRL('c'): in list_menu__run()
|
| D | map.c | 96 case CTRL('c'): in map_browser__run()
|
| /Linux-v6.6/Documentation/devicetree/bindings/mips/brcm/ |
| D | soc.txt | 21 = Always-On control block (AON CTRL)
32 - reg : the register start and length for the AON CTRL block
|
| /Linux-v6.6/drivers/net/ethernet/intel/igbvf/ |
| D | vf.c | 114 ctrl = er32(CTRL); in e1000_reset_hw_vf()
115 ew32(CTRL, ctrl | E1000_CTRL_RST); in e1000_reset_hw_vf()
|
| /Linux-v6.6/drivers/usb/gadget/udc/ |
| D | tegra-xudc.c | 51 #define CTRL 0x030 macro
1749 val = xudc_readl(xudc, CTRL); in __tegra_xudc_ep_disable()
1751 xudc_writel(xudc, val, CTRL); in __tegra_xudc_ep_disable()
1835 val = xudc_readl(xudc, CTRL); in __tegra_xudc_ep_enable()
1837 xudc_writel(xudc, val, CTRL); in __tegra_xudc_ep_enable()
2055 val = xudc_readl(xudc, CTRL); in tegra_xudc_gadget_pullup()
2060 xudc_writel(xudc, val, CTRL); in tegra_xudc_gadget_pullup()
2102 val = xudc_readl(xudc, CTRL); in tegra_xudc_gadget_start()
2104 xudc_writel(xudc, val, CTRL); in tegra_xudc_gadget_start()
2111 val = xudc_readl(xudc, CTRL); in tegra_xudc_gadget_start()
[all …]
|
| D | atmel_usba_udc.c | 1008 ctrl = usba_readl(udc, CTRL); in usba_udc_wakeup()
1009 usba_writel(udc, CTRL, ctrl | USBA_REMOTE_WAKE_UP); in usba_udc_wakeup()
1191 regval = usba_readl(udc, CTRL); in set_address()
1193 usba_writel(udc, CTRL, regval); in set_address()
1471 usba_writel(udc, CTRL, (usba_readl(udc, CTRL) in usba_control_irq()
1907 usba_writel(udc, CTRL, USBA_ENABLE_MASK); in usba_start()
1934 usba_writel(udc, CTRL, USBA_DISABLE_MASK); in usba_stop()
1975 ctrl = usba_readl(udc, CTRL); in atmel_usba_pullup()
1980 usba_writel(udc, CTRL, ctrl); in atmel_usba_pullup()
2325 usba_writel(udc, CTRL, USBA_DISABLE_MASK); in usba_udc_probe()
|
| /Linux-v6.6/arch/loongarch/include/asm/ |
| D | hw_breakpoint.h | 53 #define LOONGARCH_CSR_NAME_CTRL CTRL
|
| /Linux-v6.6/Documentation/devicetree/bindings/leds/ |
| D | leds-lt3593.txt | 5 - lltc,ctrl-gpios: A handle to the GPIO that is connected to the 'CTRL'
|
| /Linux-v6.6/drivers/net/wwan/ |
| D | Kconfig | 43 MHI WWAN CTRL allows QCOM-based PCIe modems to expose different modem
81 RPMSG WWAN CTRL allows modems available via RPMSG channels to expose
|
| /Linux-v6.6/drivers/mmc/host/ |
| D | dw_mmc.c | 159 seq_printf(s, "CTRL:\t0x%08x\n", mci_readl(host, CTRL)); in dw_mci_regs_show()
196 ctrl = mci_readl(host, CTRL); in dw_mci_ctrl_reset()
198 mci_writel(host, CTRL, ctrl); in dw_mci_ctrl_reset()
462 temp = mci_readl(host, CTRL); in dw_mci_idmac_stop_dma()
465 mci_writel(host, CTRL, temp); in dw_mci_idmac_stop_dma()
745 temp = mci_readl(host, CTRL); in dw_mci_idmac_start_dma()
747 mci_writel(host, CTRL, temp); in dw_mci_idmac_start_dma()
1118 temp = mci_readl(host, CTRL); in dw_mci_submit_data_dma()
1120 mci_writel(host, CTRL, temp); in dw_mci_submit_data_dma()
1179 temp = mci_readl(host, CTRL); in dw_mci_submit_data()
[all …]
|
| /Linux-v6.6/drivers/infiniband/hw/hfi1/ |
| D | pio.c | 728 write_kctxt_csr(dd, hw_context, SC(CTRL), reg); in sc_alloc()
859 write_kctxt_csr(dd, hw_context, SC(CTRL), 0); in sc_free()
888 reg = read_kctxt_csr(sc->dd, sc->hw_context, SC(CTRL)); in sc_disable()
892 write_kctxt_csr(sc->dd, sc->hw_context, SC(CTRL), reg); in sc_disable()
1262 sc_ctrl = read_kctxt_csr(dd, sc->hw_context, SC(CTRL)); in sc_enable()
1323 write_kctxt_csr(dd, sc->hw_context, SC(CTRL), sc_ctrl); in sc_enable()
1328 read_kctxt_csr(dd, sc->hw_context, SC(CTRL)); in sc_enable()
|
