| /Linux-v5.4/arch/arm/mach-spear/ |
| D | Kconfig | 34 Supports ST SPEAr1310 machine configured via the device-tree
41 Supports ST SPEAr1340 machine configured via the device-tree
60 Supports ST SPEAr300 machine configured via the device-tree
66 Supports ST SPEAr310 machine configured via the device-tree
72 Supports ST SPEAr320 machine configured via the device-tree
88 Supports ST SPEAr600 boards configured via the device-tree
|
| /Linux-v5.4/drivers/tty/serial/ |
| D | kgdboc.c | 29 static int configured = -1; variable
139 if (configured == 1) in cleanup_kgdboc()
195 configured = 1; in configure_kgdboc()
204 configured = 0; in configure_kgdboc()
213 if (configured == 1) in init_kgdboc()
246 if (configured < 0) { in param_set_kgdboc_var()
262 if (configured == 1) in param_set_kgdboc_var()
|
| /Linux-v5.4/Documentation/devicetree/bindings/iio/humidity/ |
| D | hts221.txt | 8 - drive-open-drain: the interrupt/data ready line will be configured
11 If the requested interrupt is configured as IRQ_TYPE_LEVEL_HIGH or
14 line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING.
16 - interrupts: interrupt mapping for IRQ. It should be configured with
|
| /Linux-v5.4/Documentation/devicetree/bindings/dma/xilinx/ |
| D | xilinx_dma.txt | 2 It can be configured to have one channel or two channels. If configured
7 target devices. It can be configured to have one channel or two channels.
8 If configured as two channels, one is to transmit to the device and another
38 - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
42 register as configured in h/w. Takes values {8...26}. If the property
45 - xlnx,mcdma: Tells whether configured for multi-channel mode in the hardware.
65 - xlnx,include-dre: Tells hardware is configured for Data
|
| /Linux-v5.4/Documentation/devicetree/bindings/pinctrl/ |
| D | qcom,pmic-gpio.txt | 107 Definition: Specify the alternative function to be configured for the
124 Definition: The specified pins should be configured as no pull.
129 Definition: The specified pins should be configured as pull down.
134 Definition: The specified pins should be configured as pull up.
162 Definition: The specified pins are configured in output mode, driven
168 Definition: The specified pins are configured in output mode, driven
192 Definition: The specified pins are configured in push-pull mode.
197 Definition: The specified pins are configured in open-drain mode.
202 Definition: The specified pins are configured in open-source mode.
207 Definition: The specified pins are configured in analog-pass-through mode.
[all …]
|
| D | renesas,rza1-pinctrl.txt | 103 When a pin has to be configured in alternate function mode, use this
106 When multiple pins are required to be configured as part of the same
125 The hardware reference manual specifies when a pin has to be configured to
140 Pin #0 on port #3 is configured as alternate function #6.
141 Pin #2 on port #3 is configured as alternate function #4.
152 Pin #4 on port #1 is configured as alternate function #1.
153 Pin #5 on port #1 is configured as alternate function #1.
181 Pin #0 on port #4 is configured as alternate function #2 with IO direction
183 Pin #1 on port #4 is configured as alternate function #1 with IO direction
189 generally speaking, each of them can be configured in GPIO ("port") mode
|
| D | qcom,mdm9615-pinctrl.txt | 90 Definition: Specify the alternative function to be configured for the
100 Definition: The specified pins should be configured as no pull.
105 Definition: The specified pins should be configured as pull down.
110 Definition: The specified pins should be configured as pull up.
115 Definition: The specified pins are configured in output mode, driven
121 Definition: The specified pins are configured in output mode, driven
|
| D | qcom,msm8916-pinctrl.txt | 101 Definition: Specify the alternative function to be configured for the
133 Definition: The specified pins should be configured as no pull.
138 Definition: The specified pins should be configured as pull down.
143 Definition: The specified pins should be configured as pull up.
148 Definition: The specified pins are configured in output mode, driven
155 Definition: The specified pins are configured in output mode, driven
|
| D | qcom,msm8960-pinctrl.txt | 96 Definition: Specify the alternative function to be configured for the
127 Definition: The specified pins should be configured as no pull.
132 Definition: The specified pins should be configured as pull down.
137 Definition: The specified pins should be configured as pull up.
142 Definition: The specified pins are configured in output mode, driven
149 Definition: The specified pins are configured in output mode, driven
|
| D | qcom,sdm845-pinctrl.txt | 88 Definition: Specify the alternative function to be configured for the
121 Definition: The specified pins should be configured as no pull.
126 Definition: The specified pins should be configured as pull down.
131 Definition: The specified pins should be configured as pull up.
136 Definition: The specified pins are configured in output mode, driven
143 Definition: The specified pins are configured in output mode, driven
|
| D | qcom,apq8084-pinctrl.txt | 96 Definition: Specify the alternative function to be configured for the
125 Definition: The specified pins should be configured as no pull.
130 Definition: The specified pins should be configured as pull down.
135 Definition: The specified pins should be configured as pull up.
140 Definition: The specified pins are configured in output mode, driven
147 Definition: The specified pins are configured in output mode, driven
|
| D | qcom,ipq8074-pinctrl.txt | 90 Definition: Specify the alternative function to be configured for the
121 Definition: The specified pins should be configured as no pull.
126 Definition: The specified pins should be configured as pull down.
131 Definition: The specified pins should be configured as pull up.
136 Definition: The specified pins are configured in output mode, driven
142 Definition: The specified pins are configured in output mode, driven
|
| D | qcom,msm8994-pinctrl.txt | 99 Definition: Specify the alternative function to be configured for the
131 Definition: The specified pins should be configured as no pull.
136 Definition: The specified pins should be configured as pull down.
141 Definition: The specified pins should be configured as pull up.
146 Definition: The specified pins are configured in output mode, driven
153 Definition: The specified pins are configured in output mode, driven
|
| D | qcom,msm8998-pinctrl.txt | 99 Definition: Specify the alternative function to be configured for the
145 Definition: The specified pins should be configured as no pull.
150 Definition: The specified pins should be configured as pull down.
155 Definition: The specified pins should be configured as pull up.
160 Definition: The specified pins are configured in output mode, driven
167 Definition: The specified pins are configured in output mode, driven
|
| D | qcom,qcs404-pinctrl.txt | 103 Definition: Specify the alternative function to be configured for the
153 Definition: The specified pins should be configured as no pull.
158 Definition: The specified pins should be configured as pull down.
163 Definition: The specified pins should be configured as pull up.
168 Definition: The specified pins are configured in output mode, driven
175 Definition: The specified pins are configured in output mode, driven
|
| D | qcom,sc7180-pinctrl.txt | 109 Definition: Specify the alternative function to be configured for the
139 Definition: The specified pins should be configured as no pull.
144 Definition: The specified pins should be configured as pull down.
149 Definition: The specified pins should be configured as pull up.
154 Definition: The specified pins are configured in output mode, driven
161 Definition: The specified pins are configured in output mode, driven
|
| /Linux-v5.4/Documentation/devicetree/bindings/iio/imu/ |
| D | st_lsm6dsx.txt | 23 - drive-open-drain: the interrupt/data ready line will be configured
27 If the requested interrupt is configured as IRQ_TYPE_LEVEL_HIGH or
30 line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING.
31 - interrupts: interrupt mapping for IRQ. It should be configured with
|
| /Linux-v5.4/Documentation/devicetree/bindings/sound/ |
| D | pcm512x.txt | 3 These devices support both I2C and SPI (configured with pin strapping
20 is absent the device will be configured to clock from BCLK. If pll-in
22 configured to accept clock input on a specified gpio pin.
25 through <6>. The device will be configured for clock input on the
|
| D | cs42l52.txt | 21 - cirrus,mica-differential-cfg : boolean, If present, then the MICA input is configured
22 as a differential input. If not present then the MICA input is configured as
25 - cirrus,micb-differential-cfg : boolean, If present, then the MICB input is configured
26 as a differential input. If not present then the MICB input is configured as
|
| /Linux-v5.4/Documentation/devicetree/bindings/power/supply/ |
| D | qcom_smbb.txt | 44 Usage: optional (default: 1A, or pre-configured value)
49 Usage: optional (default: 3.2V, or pre-configured value)
56 Usage: optional (default: 4.2V, or pre-configured value)
63 Usage: optional (default: 4.2V, or pre-configured value)
70 Usage: optional (default: 1A, or pre-configured value)
77 Usage: optional (default: 4.1V, or pre-configured value)
84 Usage: optional (default: 4.3V, or pre-configured value)
89 Usage: optional (default: 100mA, or pre-configured value)
|
| /Linux-v5.4/Documentation/devicetree/bindings/hwmon/ |
| D | lm87.txt | 12 are configured as voltage input pins in0 and in5.
14 - has-in6: When set, pin 5 is configured to be used as voltage input
17 - has-in7: When set, pin 6 is configured to be used as voltage input
|
| /Linux-v5.4/drivers/char/mwave/ |
| D | README | 20 irq used by the dsp to be configured.
25 io range used by the dsp to be configured.
30 irq used by the mwave uart to be configured.
35 io range used by the mwave uart to be configured.
|
| /Linux-v5.4/arch/nios2/platform/ |
| D | Kconfig.platform | 65 Set to true if you configured the Nios II to include the MUL
71 Set to true if you configured the Nios II to include the MULX
77 Set to true if you configured the Nios II to include the DIV
84 Set to true if you configured the Nios II R2 to include
92 Set to true if you configured the Nios II R2 to include
112 Number of the instruction as configured in QSYS Builder.
122 perfectly fine, even if the Nios II is configured with smaller caches.
|
| /Linux-v5.4/drivers/misc/ |
| D | kgdbts.c | 148 static int configured = -1; variable
188 if (configured) in kgdbts_unreg_thread()
190 configured = 0; in kgdbts_unreg_thread()
1055 configured = 0; in kgdbts_run_tests()
1082 configured = 0; in configure_kgdbts()
1085 configured = 1; in configure_kgdbts()
1092 configured = 0; in configure_kgdbts()
1100 if (configured == 1) in init_kgdbts()
1134 if (configured < 0) { in param_set_kgdbts_var()
1139 if (configured == 1) { in param_set_kgdbts_var()
|
| /Linux-v5.4/include/linux/ |
| D | if_frad.h | 56 int configured; member
70 int configured; /* has this device been configured */ member
|
