| /Linux-v6.1/Documentation/devicetree/bindings/regulator/ |
| D | da9211.txt | 7 - reg: I2C slave address, usually 0x68.
24 reg = <0x68>;
34 enable-gpios = <&gpio 27 0>;
44 reg = <0x68>;
54 enable-gpios = <&gpio 27 0>;
62 enable-gpios = <&gpio 17 0>;
70 reg = <0x68>;
80 enable-gpios = <&gpio 27 0>;
88 reg = <0x68>;
98 enable-gpios = <&gpio 27 0>;
[all …]
|
| D | da9210.txt | 6 - reg: the i2c slave address of the regulator. It should be 0x68.
19 reg = <0x68>;
|
| D | isl9305.txt | 6 - reg: I2C slave address, usually 0x68.
23 reg = <0x68>;
|
| /Linux-v6.1/crypto/ |
| D | testmgr.h | 33 * @ksize: Length of @key in bytes (0 if no key)
103 * @crypt_error: When @novrfy=0, the expected error from encrypt(). When
193 "\xAD\xB3\x00\xA0\x28\x5E\x53\x01\x93\x0E\x0C\x70\xFB\x68\x76\x93"
240 "\x4E\xE0\xAA\xB1\x2D\x7B\x61\xA5\x1F\x52\x7A\x9A\x41\xF6\xC1\x68"
246 "\xF8\x3F\x31\x25\x1E\x06\x68\xB4\x27\x84\x81\x38\x01\x57\x96\x41"
250 "\x44\xE5\x6A\xAF\x68\xC5\x6C\x09\x2C\xD3\x8D\xC3\xBE\xF5\xD2\x0A"
287 "\xc2\x7f\x74\x81\x91\x68\x44\x48\x5a\xdc\xa0\x7e\xa7\x0b\x05\x7f"
339 "\x68\x27\xE2\x96\xB5\x72\xC9\xC3\xD4\x42\xAA\xAA\xCA\x95\x8F\xFF"
340 "\xC9\x9B\x52\x34\x30\x1D\xCF\xFE\xCF\x3C\x56\x68\x6E\xEF\xE7\x6C"
376 "\x0D\x8B\x6C\x6D\x13\x74\xD5\x1C\xDE\xA9\xF4\x60\x37\xFE\x68\x77"
[all …]
|
| /Linux-v6.1/drivers/clk/imx/ |
| D | clk-imx6ul.c | 75 { .val = 0, .div = 20, },
85 { .val = 0, .div = 4, },
90 { .val = 0, .div = 1, },
127 hws[IMX6UL_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0); in imx6ul_clocks_init()
137 base = of_iomap(np, 0); in imx6ul_clocks_init()
141 …hws[IMX6UL_PLL1_BYPASS_SRC] = imx_clk_hw_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src… in imx6ul_clocks_init()
142 …hws[IMX6UL_PLL2_BYPASS_SRC] = imx_clk_hw_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src… in imx6ul_clocks_init()
143 …hws[IMX6UL_PLL3_BYPASS_SRC] = imx_clk_hw_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src… in imx6ul_clocks_init()
144 …hws[IMX6UL_PLL4_BYPASS_SRC] = imx_clk_hw_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src… in imx6ul_clocks_init()
145 …hws[IMX6UL_PLL5_BYPASS_SRC] = imx_clk_hw_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src… in imx6ul_clocks_init()
[all …]
|
| D | clk-imx6sx.c | 89 { .val = 0, .div = 20, },
99 { .val = 0, .div = 4, },
104 { .val = 0, .div = 1, },
133 hws[IMX6SX_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0); in imx6sx_clocks_init()
147 base = of_iomap(np, 0); in imx6sx_clocks_init()
151 …hws[IMX6SX_PLL1_BYPASS_SRC] = imx_clk_hw_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src… in imx6sx_clocks_init()
152 …hws[IMX6SX_PLL2_BYPASS_SRC] = imx_clk_hw_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src… in imx6sx_clocks_init()
153 …hws[IMX6SX_PLL3_BYPASS_SRC] = imx_clk_hw_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src… in imx6sx_clocks_init()
154 …hws[IMX6SX_PLL4_BYPASS_SRC] = imx_clk_hw_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src… in imx6sx_clocks_init()
155 …hws[IMX6SX_PLL5_BYPASS_SRC] = imx_clk_hw_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src… in imx6sx_clocks_init()
[all …]
|
| /Linux-v6.1/net/wireless/certs/ |
| D | sforshee.hex | 2 0x30, 0x82, 0x02, 0xa4, 0x30, 0x82, 0x01, 0x8c,
3 0x02, 0x09, 0x00, 0xb2, 0x8d, 0xdf, 0x47, 0xae,
4 0xf9, 0xce, 0xa7, 0x30, 0x0d, 0x06, 0x09, 0x2a,
5 0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x01, 0x0b,
6 0x05, 0x00, 0x30, 0x13, 0x31, 0x11, 0x30, 0x0f,
7 0x06, 0x03, 0x55, 0x04, 0x03, 0x0c, 0x08, 0x73,
8 0x66, 0x6f, 0x72, 0x73, 0x68, 0x65, 0x65, 0x30,
9 0x20, 0x17, 0x0d, 0x31, 0x37, 0x31, 0x30, 0x30,
10 0x36, 0x31, 0x39, 0x34, 0x30, 0x33, 0x35, 0x5a,
11 0x18, 0x0f, 0x32, 0x31, 0x31, 0x37, 0x30, 0x39,
[all …]
|
| /Linux-v6.1/drivers/net/wireless/mediatek/mt76/mt76x0/ |
| D | initvals_phy.h | 12 { MT_RF(0, 1), 0x01 },
13 { MT_RF(0, 2), 0x11 },
15 { MT_RF(0, 3), 0x73 }, /* VCO Freq Cal */
16 { MT_RF(0, 4), 0x30 }, /* R4 b<7>=1, VCO cal */
17 { MT_RF(0, 5), 0x00 },
18 { MT_RF(0, 6), 0x41 },
19 { MT_RF(0, 7), 0x00 },
20 { MT_RF(0, 8), 0x00 },
21 { MT_RF(0, 9), 0x00 },
22 { MT_RF(0, 10), 0x0C },
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/display/bridge/ |
| D | toshiba,tc358767.yaml | 20 - 0x68
21 - 0x0f
23 i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
47 - 0
49 description: TC358767 GPIO pin number to which HPD is connected to (0 or 1)
55 port@0:
92 - port@0
114 #size-cells = <0>;
118 reg = <0x68>;
126 #size-cells = <0>;
[all …]
|
| /Linux-v6.1/drivers/scsi/aic7xxx/ |
| D | aic79xx_seq.h_shipped | 9 0xff, 0x02, 0x06, 0x78,
10 0x00, 0xea, 0x6e, 0x59,
11 0x01, 0xea, 0x04, 0x30,
12 0xff, 0x04, 0x0c, 0x78,
13 0x19, 0xea, 0x6e, 0x59,
14 0x19, 0xea, 0x04, 0x00,
15 0x33, 0xea, 0x68, 0x59,
16 0x33, 0xea, 0x00, 0x00,
17 0x60, 0x3a, 0x3a, 0x68,
18 0x04, 0x4d, 0x35, 0x78,
[all …]
|
| /Linux-v6.1/drivers/block/paride/ |
| D | comm.c | 29 /* mode codes: 0 nybble reads, 8-bit writes
34 #define j44(a,b) (((a>>3)&0x0f)|((b<<1)&0xf0))
36 #define P1 w2(5);w2(0xd);w2(0xd);w2(5);w2(4);
39 /* cont = 0 - access the IDE register file
43 static int cont_map[2] = { 0x08, 0x10 };
53 case 0: w0(r); P1; w0(0); in comm_read_regr()
54 w2(6); l = r1(); w0(0x80); h = r1(); w2(4); in comm_read_regr()
57 case 1: w0(r+0x20); P1; in comm_read_regr()
58 w0(0); w2(0x26); h = r0(); w2(4); in comm_read_regr()
63 case 4: w3(r+0x20); (void)r1(); in comm_read_regr()
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/rtc/ |
| D | isil,isl12057.txt | 33 reg = <0x68>;
59 reg = <0x68>;
60 pinctrl-0 = <&rtc_alarm_pin>;
72 reg = <0x68>;
|
| D | ti,bq32000.yaml | 20 const: 0x68
42 #size-cells = <0>;
46 reg = <0x68>;
|
| /Linux-v6.1/fs/nls/ |
| D | nls_ascii.c | 17 /* 0x00*/
18 0x0000, 0x0001, 0x0002, 0x0003,
19 0x0004, 0x0005, 0x0006, 0x0007,
20 0x0008, 0x0009, 0x000a, 0x000b,
21 0x000c, 0x000d, 0x000e, 0x000f,
22 /* 0x10*/
23 0x0010, 0x0011, 0x0012, 0x0013,
24 0x0014, 0x0015, 0x0016, 0x0017,
25 0x0018, 0x0019, 0x001a, 0x001b,
26 0x001c, 0x001d, 0x001e, 0x001f,
[all …]
|
| D | nls_iso8859-6.c | 17 /* 0x00*/
18 0x0000, 0x0001, 0x0002, 0x0003,
19 0x0004, 0x0005, 0x0006, 0x0007,
20 0x0008, 0x0009, 0x000a, 0x000b,
21 0x000c, 0x000d, 0x000e, 0x000f,
22 /* 0x10*/
23 0x0010, 0x0011, 0x0012, 0x0013,
24 0x0014, 0x0015, 0x0016, 0x0017,
25 0x0018, 0x0019, 0x001a, 0x001b,
26 0x001c, 0x001d, 0x001e, 0x001f,
[all …]
|
| D | nls_cp852.c | 17 /* 0x00*/
18 0x0000, 0x0001, 0x0002, 0x0003,
19 0x0004, 0x0005, 0x0006, 0x0007,
20 0x0008, 0x0009, 0x000a, 0x000b,
21 0x000c, 0x000d, 0x000e, 0x000f,
22 /* 0x10*/
23 0x0010, 0x0011, 0x0012, 0x0013,
24 0x0014, 0x0015, 0x0016, 0x0017,
25 0x0018, 0x0019, 0x001a, 0x001b,
26 0x001c, 0x001d, 0x001e, 0x001f,
[all …]
|
| /Linux-v6.1/crypto/asymmetric_keys/ |
| D | selftest.c | 48 "\x43\xfd\x24\xb2\x49\x3c\xa5\xf7\x7a\x7c\xd4\x45\x3d\x97\x75\x68"
60 "\x38\x88\x18\x97\x96\x08\x81\xaa\xcc\x8f\x0f\x8a\x32\x7b\x76\x68"
61 "\x03\x68\x43\xbf\x11\xba\x55\x60\xfd\x80\x1c\x0d\x9b\x69\xb6\x09"
70 "\x31\xf3\x1c\xc7\x4b\xe6\x93\xcd\x42\xa2\xe4\x68\x10\x47\x9d\xfc"
85 "\x68\xe6\xe4\x7b\xd0\x28\xf7\x6d\xe7\x3f\x50\xfc\x91\x7c\x91\x56"
117 "\x54\x68\x69\x73\x20\x69\x73\x20\x73\x6f\x6d\x65\x20\x74\x65\x73"
139 "\x88\x79\x99\x51\x6b\x5b\x28\x31\xc0\xb3\x1b\x7a\x68\x2c\x00\xdb"
198 if (ret < 0) in fips_signature_selftest()
201 for (i = 0; i < ARRAY_SIZE(certs_tests); i++) { in fips_signature_selftest()
212 if (ret < 0) in fips_signature_selftest()
[all …]
|
| /Linux-v6.1/arch/mips/pci/ |
| D | ops-lantiq.c | 23 #define PCI_ACCESS_READ 0
33 /* we support slot from 0 to 15 dev_fn & 0x68 (AD29) is the in ltq_pci_config_access()
35 if ((bus->number != 0) || ((devfn & 0xf8) > 0x78) in ltq_pci_config_access()
36 || ((devfn & 0xf8) == 0) || ((devfn & 0xf8) == 0x68)) in ltq_pci_config_access()
43 LTQ_PCI_CFG_FUNNUM_SHF) | (where & ~0x3); in ltq_pci_config_access()
56 cfg_base |= (0x0 << LTQ_PCI_CFG_FUNNUM_SHF) + 4; in ltq_pci_config_access()
60 cfg_base |= (0x68 << LTQ_PCI_CFG_FUNNUM_SHF) + 4; in ltq_pci_config_access()
65 if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ)) in ltq_pci_config_access()
68 return 0; in ltq_pci_config_access()
74 u32 data = 0; in ltq_pci_read_config_dword()
[all …]
|
| /Linux-v6.1/include/dt-bindings/clock/ |
| D | omap5.h | 8 #define OMAP5_CLKCTRL_OFFSET 0x20
12 #define OMAP5_MPU_CLKCTRL OMAP5_CLKCTRL_INDEX(0x20)
15 #define OMAP5_MMU_DSP_CLKCTRL OMAP5_CLKCTRL_INDEX(0x20)
18 #define OMAP5_L4_ABE_CLKCTRL OMAP5_CLKCTRL_INDEX(0x20)
19 #define OMAP5_AESS_CLKCTRL OMAP5_CLKCTRL_INDEX(0x28)
20 #define OMAP5_MCPDM_CLKCTRL OMAP5_CLKCTRL_INDEX(0x30)
21 #define OMAP5_DMIC_CLKCTRL OMAP5_CLKCTRL_INDEX(0x38)
22 #define OMAP5_MCBSP1_CLKCTRL OMAP5_CLKCTRL_INDEX(0x48)
23 #define OMAP5_MCBSP2_CLKCTRL OMAP5_CLKCTRL_INDEX(0x50)
24 #define OMAP5_MCBSP3_CLKCTRL OMAP5_CLKCTRL_INDEX(0x58)
[all …]
|
| D | omap4.h | 8 #define OMAP4_CLKCTRL_OFFSET 0x20
12 #define OMAP4_MPU_CLKCTRL OMAP4_CLKCTRL_INDEX(0x20)
15 #define OMAP4_DSP_CLKCTRL OMAP4_CLKCTRL_INDEX(0x20)
18 #define OMAP4_L4_ABE_CLKCTRL OMAP4_CLKCTRL_INDEX(0x20)
19 #define OMAP4_AESS_CLKCTRL OMAP4_CLKCTRL_INDEX(0x28)
20 #define OMAP4_MCPDM_CLKCTRL OMAP4_CLKCTRL_INDEX(0x30)
21 #define OMAP4_DMIC_CLKCTRL OMAP4_CLKCTRL_INDEX(0x38)
22 #define OMAP4_MCASP_CLKCTRL OMAP4_CLKCTRL_INDEX(0x40)
23 #define OMAP4_MCBSP1_CLKCTRL OMAP4_CLKCTRL_INDEX(0x48)
24 #define OMAP4_MCBSP2_CLKCTRL OMAP4_CLKCTRL_INDEX(0x50)
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/leds/ |
| D | leds-tlc591xx.txt | 6 - #size-cells: must be 0
7 - reg: typically 0x68
13 - reg: number of LED line, 0 to 15 or 0 to 7
21 #size-cells = <0>;
23 reg = <0x68>;
25 wan@0 {
27 reg = <0x0>;
32 reg = <0x2>;
37 reg = <0x9>;
|
| /Linux-v6.1/drivers/media/usb/gspca/ |
| D | t613.c | 54 #if 0 /* HDG: broken with my test cam, so lets disable it */
66 #if 0 /* HDG: broken with my test cam, so lets disable it */
77 .priv = 0},
94 0x09, 0x01, 0x12, 0x04, 0x66, 0x8a, 0x80, 0x3c,
95 0x81, 0x22, 0x84, 0x50, 0x8a, 0x78, 0x8b, 0x68,
96 0x8c, 0x88, 0x8e, 0x33, 0x8f, 0x24, 0xaa, 0xb1,
97 0xa2, 0x60, 0xa5, 0x30, 0xa6, 0x3a, 0xa8, 0xe8,
98 0xae, 0x05, 0xb1, 0x00, 0xbb, 0x04, 0xbc, 0x48,
99 0xbe, 0x36, 0xc6, 0x88, 0xe9, 0x00, 0xc5, 0xc0,
100 0x65, 0x0a, 0xbb, 0x86, 0xaf, 0x58, 0xb0, 0x68,
[all …]
|
| /Linux-v6.1/arch/arm/boot/dts/ |
| D | imx1-pinfunc.h | 15 * function: 0 - Primary function
18 * direction: 0 - Input
20 * gpio_oconf: 0 - A_IN
24 * gpio_iconfa/b: 0 - GPIO_IN
26 * 2 - 0
29 * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32
31 * the pin number on the specific port (between 0 and 31).
34 #define MX1_PAD_A24__A24 0x00 0x004
35 #define MX1_PAD_A24__GPIO1_0 0x00 0x032
36 #define MX1_PAD_A24__SPI2_CLK 0x00 0x006
[all …]
|
| /Linux-v6.1/drivers/staging/media/meson/vdec/ |
| D | codec_h264.c | 15 #define SIZE_WORKSPACE 0x1ee000
22 #define WORKSPACE_BUF_OFFSET 0x1000000
25 #define CMD_MASK GENMASK(7, 0)
43 #define PIC_STRUCT_MASK GENMASK(2, 0)
44 #define BUF_IDX_MASK GENMASK(4, 0)
47 #define OFFSET_MASK GENMASK(15, 0)
51 #define MB_TOTAL_MASK GENMASK(15, 0)
52 #define MB_WIDTH_MASK GENMASK(7, 0)
54 #define MAX_REF_MASK GENMASK(6, 0)
56 #define AR_IDC_MASK GENMASK(7, 0)
[all …]
|
| /Linux-v6.1/arch/sparc/crypto/ |
| D | des_asm.S | 11 ld [%o0 + 0x00], %f0
12 ld [%o0 + 0x04], %f1
13 DES_KEXPAND(0, 0, 0)
14 DES_KEXPAND(0, 1, 2)
29 std %f0, [%o1 + 0x00]
30 std %f2, [%o1 + 0x08]
31 std %f4, [%o1 + 0x10]
32 std %f6, [%o1 + 0x18]
33 std %f8, [%o1 + 0x20]
34 std %f10, [%o1 + 0x28]
[all …]
|
