1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * ALSA SoC Texas Instruments TAS6424 Quad-Channel Audio Amplifier 4 * 5 * Copyright (C) 2016-2017 Texas Instruments Incorporated - https://www.ti.com/ 6 * Author: Andreas Dannenberg <dannenberg@ti.com> 7 * Andrew F. Davis <afd@ti.com> 8 */ 9 10 #include <linux/module.h> 11 #include <linux/errno.h> 12 #include <linux/device.h> 13 #include <linux/i2c.h> 14 #include <linux/regmap.h> 15 #include <linux/slab.h> 16 #include <linux/regulator/consumer.h> 17 #include <linux/delay.h> 18 #include <linux/gpio/consumer.h> 19 20 #include <sound/pcm.h> 21 #include <sound/pcm_params.h> 22 #include <sound/soc.h> 23 #include <sound/soc-dapm.h> 24 #include <sound/tlv.h> 25 26 #include "tas6424.h" 27 28 /* Define how often to check (and clear) the fault status register (in ms) */ 29 #define TAS6424_FAULT_CHECK_INTERVAL 200 30 31 static const char * const tas6424_supply_names[] = { 32 "dvdd", /* Digital power supply. Connect to 3.3-V supply. */ 33 "vbat", /* Supply used for higher voltage analog circuits. */ 34 "pvdd", /* Class-D amp output FETs supply. */ 35 }; 36 #define TAS6424_NUM_SUPPLIES ARRAY_SIZE(tas6424_supply_names) 37 38 struct tas6424_data { 39 struct device *dev; 40 struct regmap *regmap; 41 struct regulator_bulk_data supplies[TAS6424_NUM_SUPPLIES]; 42 struct delayed_work fault_check_work; 43 unsigned int last_cfault; 44 unsigned int last_fault1; 45 unsigned int last_fault2; 46 unsigned int last_warn; 47 struct gpio_desc *standby_gpio; 48 struct gpio_desc *mute_gpio; 49 }; 50 51 /* 52 * DAC digital volumes. From -103.5 to 24 dB in 0.5 dB steps. Note that 53 * setting the gain below -100 dB (register value <0x7) is effectively a MUTE 54 * as per device datasheet. 55 */ 56 static DECLARE_TLV_DB_SCALE(dac_tlv, -10350, 50, 0); 57 58 static const struct snd_kcontrol_new tas6424_snd_controls[] = { 59 SOC_SINGLE_TLV("Speaker Driver CH1 Playback Volume", 60 TAS6424_CH1_VOL_CTRL, 0, 0xff, 0, dac_tlv), 61 SOC_SINGLE_TLV("Speaker Driver CH2 Playback Volume", 62 TAS6424_CH2_VOL_CTRL, 0, 0xff, 0, dac_tlv), 63 SOC_SINGLE_TLV("Speaker Driver CH3 Playback Volume", 64 TAS6424_CH3_VOL_CTRL, 0, 0xff, 0, dac_tlv), 65 SOC_SINGLE_TLV("Speaker Driver CH4 Playback Volume", 66 TAS6424_CH4_VOL_CTRL, 0, 0xff, 0, dac_tlv), 67 SOC_SINGLE_STROBE("Auto Diagnostics Switch", TAS6424_DC_DIAG_CTRL1, 68 TAS6424_LDGBYPASS_SHIFT, 1), 69 }; 70 tas6424_dac_event(struct snd_soc_dapm_widget * w,struct snd_kcontrol * kcontrol,int event)71 static int tas6424_dac_event(struct snd_soc_dapm_widget *w, 72 struct snd_kcontrol *kcontrol, int event) 73 { 74 struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); 75 struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); 76 77 dev_dbg(component->dev, "%s() event=0x%0x\n", __func__, event); 78 79 if (event & SND_SOC_DAPM_POST_PMU) { 80 /* Observe codec shutdown-to-active time */ 81 msleep(12); 82 83 /* Turn on TAS6424 periodic fault checking/handling */ 84 tas6424->last_fault1 = 0; 85 tas6424->last_fault2 = 0; 86 tas6424->last_warn = 0; 87 schedule_delayed_work(&tas6424->fault_check_work, 88 msecs_to_jiffies(TAS6424_FAULT_CHECK_INTERVAL)); 89 } else if (event & SND_SOC_DAPM_PRE_PMD) { 90 /* Disable TAS6424 periodic fault checking/handling */ 91 cancel_delayed_work_sync(&tas6424->fault_check_work); 92 } 93 94 return 0; 95 } 96 97 static const struct snd_soc_dapm_widget tas6424_dapm_widgets[] = { 98 SND_SOC_DAPM_AIF_IN("DAC IN", "Playback", 0, SND_SOC_NOPM, 0, 0), 99 SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, tas6424_dac_event, 100 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), 101 SND_SOC_DAPM_OUTPUT("OUT") 102 }; 103 104 static const struct snd_soc_dapm_route tas6424_audio_map[] = { 105 { "DAC", NULL, "DAC IN" }, 106 { "OUT", NULL, "DAC" }, 107 }; 108 tas6424_hw_params(struct snd_pcm_substream * substream,struct snd_pcm_hw_params * params,struct snd_soc_dai * dai)109 static int tas6424_hw_params(struct snd_pcm_substream *substream, 110 struct snd_pcm_hw_params *params, 111 struct snd_soc_dai *dai) 112 { 113 struct snd_soc_component *component = dai->component; 114 unsigned int rate = params_rate(params); 115 unsigned int width = params_width(params); 116 u8 sap_ctrl = 0; 117 118 dev_dbg(component->dev, "%s() rate=%u width=%u\n", __func__, rate, width); 119 120 switch (rate) { 121 case 44100: 122 sap_ctrl |= TAS6424_SAP_RATE_44100; 123 break; 124 case 48000: 125 sap_ctrl |= TAS6424_SAP_RATE_48000; 126 break; 127 case 96000: 128 sap_ctrl |= TAS6424_SAP_RATE_96000; 129 break; 130 default: 131 dev_err(component->dev, "unsupported sample rate: %u\n", rate); 132 return -EINVAL; 133 } 134 135 switch (width) { 136 case 16: 137 sap_ctrl |= TAS6424_SAP_TDM_SLOT_SZ_16; 138 break; 139 case 24: 140 break; 141 default: 142 dev_err(component->dev, "unsupported sample width: %u\n", width); 143 return -EINVAL; 144 } 145 146 snd_soc_component_update_bits(component, TAS6424_SAP_CTRL, 147 TAS6424_SAP_RATE_MASK | 148 TAS6424_SAP_TDM_SLOT_SZ_16, 149 sap_ctrl); 150 151 return 0; 152 } 153 tas6424_set_dai_fmt(struct snd_soc_dai * dai,unsigned int fmt)154 static int tas6424_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) 155 { 156 struct snd_soc_component *component = dai->component; 157 u8 serial_format = 0; 158 159 dev_dbg(component->dev, "%s() fmt=0x%0x\n", __func__, fmt); 160 161 /* clock masters */ 162 switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) { 163 case SND_SOC_DAIFMT_CBC_CFC: 164 break; 165 default: 166 dev_err(component->dev, "Invalid DAI clocking\n"); 167 return -EINVAL; 168 } 169 170 /* signal polarity */ 171 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 172 case SND_SOC_DAIFMT_NB_NF: 173 break; 174 default: 175 dev_err(component->dev, "Invalid DAI clock signal polarity\n"); 176 return -EINVAL; 177 } 178 179 /* interface format */ 180 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 181 case SND_SOC_DAIFMT_I2S: 182 serial_format |= TAS6424_SAP_I2S; 183 break; 184 case SND_SOC_DAIFMT_DSP_A: 185 serial_format |= TAS6424_SAP_DSP; 186 break; 187 case SND_SOC_DAIFMT_DSP_B: 188 /* 189 * We can use the fact that the TAS6424 does not care about the 190 * LRCLK duty cycle during TDM to receive DSP_B formatted data 191 * in LEFTJ mode (no delaying of the 1st data bit). 192 */ 193 serial_format |= TAS6424_SAP_LEFTJ; 194 break; 195 case SND_SOC_DAIFMT_LEFT_J: 196 serial_format |= TAS6424_SAP_LEFTJ; 197 break; 198 default: 199 dev_err(component->dev, "Invalid DAI interface format\n"); 200 return -EINVAL; 201 } 202 203 snd_soc_component_update_bits(component, TAS6424_SAP_CTRL, 204 TAS6424_SAP_FMT_MASK, serial_format); 205 206 return 0; 207 } 208 tas6424_set_dai_tdm_slot(struct snd_soc_dai * dai,unsigned int tx_mask,unsigned int rx_mask,int slots,int slot_width)209 static int tas6424_set_dai_tdm_slot(struct snd_soc_dai *dai, 210 unsigned int tx_mask, unsigned int rx_mask, 211 int slots, int slot_width) 212 { 213 struct snd_soc_component *component = dai->component; 214 unsigned int first_slot, last_slot; 215 bool sap_tdm_slot_last; 216 217 dev_dbg(component->dev, "%s() tx_mask=%d rx_mask=%d\n", __func__, 218 tx_mask, rx_mask); 219 220 if (!tx_mask || !rx_mask) 221 return 0; /* nothing needed to disable TDM mode */ 222 223 /* 224 * Determine the first slot and last slot that is being requested so 225 * we'll be able to more easily enforce certain constraints as the 226 * TAS6424's TDM interface is not fully configurable. 227 */ 228 first_slot = __ffs(tx_mask); 229 last_slot = __fls(rx_mask); 230 231 if (last_slot - first_slot != 4) { 232 dev_err(component->dev, "tdm mask must cover 4 contiguous slots\n"); 233 return -EINVAL; 234 } 235 236 switch (first_slot) { 237 case 0: 238 sap_tdm_slot_last = false; 239 break; 240 case 4: 241 sap_tdm_slot_last = true; 242 break; 243 default: 244 dev_err(component->dev, "tdm mask must start at slot 0 or 4\n"); 245 return -EINVAL; 246 } 247 248 snd_soc_component_update_bits(component, TAS6424_SAP_CTRL, TAS6424_SAP_TDM_SLOT_LAST, 249 sap_tdm_slot_last ? TAS6424_SAP_TDM_SLOT_LAST : 0); 250 251 return 0; 252 } 253 tas6424_mute(struct snd_soc_dai * dai,int mute,int direction)254 static int tas6424_mute(struct snd_soc_dai *dai, int mute, int direction) 255 { 256 struct snd_soc_component *component = dai->component; 257 struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); 258 unsigned int val; 259 260 dev_dbg(component->dev, "%s() mute=%d\n", __func__, mute); 261 262 if (tas6424->mute_gpio) { 263 gpiod_set_value_cansleep(tas6424->mute_gpio, mute); 264 return 0; 265 } 266 267 if (mute) 268 val = TAS6424_ALL_STATE_MUTE; 269 else 270 val = TAS6424_ALL_STATE_PLAY; 271 272 snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, val); 273 274 return 0; 275 } 276 tas6424_power_off(struct snd_soc_component * component)277 static int tas6424_power_off(struct snd_soc_component *component) 278 { 279 struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); 280 int ret; 281 282 snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, TAS6424_ALL_STATE_HIZ); 283 284 regcache_cache_only(tas6424->regmap, true); 285 regcache_mark_dirty(tas6424->regmap); 286 287 ret = regulator_bulk_disable(ARRAY_SIZE(tas6424->supplies), 288 tas6424->supplies); 289 if (ret < 0) { 290 dev_err(component->dev, "failed to disable supplies: %d\n", ret); 291 return ret; 292 } 293 294 return 0; 295 } 296 tas6424_power_on(struct snd_soc_component * component)297 static int tas6424_power_on(struct snd_soc_component *component) 298 { 299 struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); 300 int ret; 301 u8 chan_states; 302 int no_auto_diags = 0; 303 unsigned int reg_val; 304 305 if (!regmap_read(tas6424->regmap, TAS6424_DC_DIAG_CTRL1, ®_val)) 306 no_auto_diags = reg_val & TAS6424_LDGBYPASS_MASK; 307 308 ret = regulator_bulk_enable(ARRAY_SIZE(tas6424->supplies), 309 tas6424->supplies); 310 if (ret < 0) { 311 dev_err(component->dev, "failed to enable supplies: %d\n", ret); 312 return ret; 313 } 314 315 regcache_cache_only(tas6424->regmap, false); 316 317 ret = regcache_sync(tas6424->regmap); 318 if (ret < 0) { 319 dev_err(component->dev, "failed to sync regcache: %d\n", ret); 320 return ret; 321 } 322 323 if (tas6424->mute_gpio) { 324 gpiod_set_value_cansleep(tas6424->mute_gpio, 0); 325 /* 326 * channels are muted via the mute pin. Don't also mute 327 * them via the registers so that subsequent register 328 * access is not necessary to un-mute the channels 329 */ 330 chan_states = TAS6424_ALL_STATE_PLAY; 331 } else { 332 chan_states = TAS6424_ALL_STATE_MUTE; 333 } 334 snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, chan_states); 335 336 /* any time we come out of HIZ, the output channels automatically run DC 337 * load diagnostics if autodiagnotics are enabled. wait here until this 338 * completes. 339 */ 340 if (!no_auto_diags) 341 msleep(230); 342 343 return 0; 344 } 345 tas6424_set_bias_level(struct snd_soc_component * component,enum snd_soc_bias_level level)346 static int tas6424_set_bias_level(struct snd_soc_component *component, 347 enum snd_soc_bias_level level) 348 { 349 dev_dbg(component->dev, "%s() level=%d\n", __func__, level); 350 351 switch (level) { 352 case SND_SOC_BIAS_ON: 353 case SND_SOC_BIAS_PREPARE: 354 break; 355 case SND_SOC_BIAS_STANDBY: 356 if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) 357 tas6424_power_on(component); 358 break; 359 case SND_SOC_BIAS_OFF: 360 tas6424_power_off(component); 361 break; 362 } 363 364 return 0; 365 } 366 367 static struct snd_soc_component_driver soc_codec_dev_tas6424 = { 368 .set_bias_level = tas6424_set_bias_level, 369 .controls = tas6424_snd_controls, 370 .num_controls = ARRAY_SIZE(tas6424_snd_controls), 371 .dapm_widgets = tas6424_dapm_widgets, 372 .num_dapm_widgets = ARRAY_SIZE(tas6424_dapm_widgets), 373 .dapm_routes = tas6424_audio_map, 374 .num_dapm_routes = ARRAY_SIZE(tas6424_audio_map), 375 .use_pmdown_time = 1, 376 .endianness = 1, 377 }; 378 379 static const struct snd_soc_dai_ops tas6424_speaker_dai_ops = { 380 .hw_params = tas6424_hw_params, 381 .set_fmt = tas6424_set_dai_fmt, 382 .set_tdm_slot = tas6424_set_dai_tdm_slot, 383 .mute_stream = tas6424_mute, 384 .no_capture_mute = 1, 385 }; 386 387 static struct snd_soc_dai_driver tas6424_dai[] = { 388 { 389 .name = "tas6424-amplifier", 390 .playback = { 391 .stream_name = "Playback", 392 .channels_min = 1, 393 .channels_max = 4, 394 .rates = TAS6424_RATES, 395 .formats = TAS6424_FORMATS, 396 }, 397 .ops = &tas6424_speaker_dai_ops, 398 }, 399 }; 400 tas6424_fault_check_work(struct work_struct * work)401 static void tas6424_fault_check_work(struct work_struct *work) 402 { 403 struct tas6424_data *tas6424 = container_of(work, struct tas6424_data, 404 fault_check_work.work); 405 struct device *dev = tas6424->dev; 406 unsigned int reg; 407 int ret; 408 409 ret = regmap_read(tas6424->regmap, TAS6424_CHANNEL_FAULT, ®); 410 if (ret < 0) { 411 dev_err(dev, "failed to read CHANNEL_FAULT register: %d\n", ret); 412 goto out; 413 } 414 415 if (!reg) { 416 tas6424->last_cfault = reg; 417 goto check_global_fault1_reg; 418 } 419 420 /* 421 * Only flag errors once for a given occurrence. This is needed as 422 * the TAS6424 will take time clearing the fault condition internally 423 * during which we don't want to bombard the system with the same 424 * error message over and over. 425 */ 426 if ((reg & TAS6424_FAULT_OC_CH1) && !(tas6424->last_cfault & TAS6424_FAULT_OC_CH1)) 427 dev_crit(dev, "experienced a channel 1 overcurrent fault\n"); 428 429 if ((reg & TAS6424_FAULT_OC_CH2) && !(tas6424->last_cfault & TAS6424_FAULT_OC_CH2)) 430 dev_crit(dev, "experienced a channel 2 overcurrent fault\n"); 431 432 if ((reg & TAS6424_FAULT_OC_CH3) && !(tas6424->last_cfault & TAS6424_FAULT_OC_CH3)) 433 dev_crit(dev, "experienced a channel 3 overcurrent fault\n"); 434 435 if ((reg & TAS6424_FAULT_OC_CH4) && !(tas6424->last_cfault & TAS6424_FAULT_OC_CH4)) 436 dev_crit(dev, "experienced a channel 4 overcurrent fault\n"); 437 438 if ((reg & TAS6424_FAULT_DC_CH1) && !(tas6424->last_cfault & TAS6424_FAULT_DC_CH1)) 439 dev_crit(dev, "experienced a channel 1 DC fault\n"); 440 441 if ((reg & TAS6424_FAULT_DC_CH2) && !(tas6424->last_cfault & TAS6424_FAULT_DC_CH2)) 442 dev_crit(dev, "experienced a channel 2 DC fault\n"); 443 444 if ((reg & TAS6424_FAULT_DC_CH3) && !(tas6424->last_cfault & TAS6424_FAULT_DC_CH3)) 445 dev_crit(dev, "experienced a channel 3 DC fault\n"); 446 447 if ((reg & TAS6424_FAULT_DC_CH4) && !(tas6424->last_cfault & TAS6424_FAULT_DC_CH4)) 448 dev_crit(dev, "experienced a channel 4 DC fault\n"); 449 450 /* Store current fault1 value so we can detect any changes next time */ 451 tas6424->last_cfault = reg; 452 453 check_global_fault1_reg: 454 ret = regmap_read(tas6424->regmap, TAS6424_GLOB_FAULT1, ®); 455 if (ret < 0) { 456 dev_err(dev, "failed to read GLOB_FAULT1 register: %d\n", ret); 457 goto out; 458 } 459 460 /* 461 * Ignore any clock faults as there is no clean way to check for them. 462 * We would need to start checking for those faults *after* the SAIF 463 * stream has been setup, and stop checking *before* the stream is 464 * stopped to avoid any false-positives. However there are no 465 * appropriate hooks to monitor these events. 466 */ 467 reg &= TAS6424_FAULT_PVDD_OV | 468 TAS6424_FAULT_VBAT_OV | 469 TAS6424_FAULT_PVDD_UV | 470 TAS6424_FAULT_VBAT_UV; 471 472 if (!reg) { 473 tas6424->last_fault1 = reg; 474 goto check_global_fault2_reg; 475 } 476 477 if ((reg & TAS6424_FAULT_PVDD_OV) && !(tas6424->last_fault1 & TAS6424_FAULT_PVDD_OV)) 478 dev_crit(dev, "experienced a PVDD overvoltage fault\n"); 479 480 if ((reg & TAS6424_FAULT_VBAT_OV) && !(tas6424->last_fault1 & TAS6424_FAULT_VBAT_OV)) 481 dev_crit(dev, "experienced a VBAT overvoltage fault\n"); 482 483 if ((reg & TAS6424_FAULT_PVDD_UV) && !(tas6424->last_fault1 & TAS6424_FAULT_PVDD_UV)) 484 dev_crit(dev, "experienced a PVDD undervoltage fault\n"); 485 486 if ((reg & TAS6424_FAULT_VBAT_UV) && !(tas6424->last_fault1 & TAS6424_FAULT_VBAT_UV)) 487 dev_crit(dev, "experienced a VBAT undervoltage fault\n"); 488 489 /* Store current fault1 value so we can detect any changes next time */ 490 tas6424->last_fault1 = reg; 491 492 check_global_fault2_reg: 493 ret = regmap_read(tas6424->regmap, TAS6424_GLOB_FAULT2, ®); 494 if (ret < 0) { 495 dev_err(dev, "failed to read GLOB_FAULT2 register: %d\n", ret); 496 goto out; 497 } 498 499 reg &= TAS6424_FAULT_OTSD | 500 TAS6424_FAULT_OTSD_CH1 | 501 TAS6424_FAULT_OTSD_CH2 | 502 TAS6424_FAULT_OTSD_CH3 | 503 TAS6424_FAULT_OTSD_CH4; 504 505 if (!reg) { 506 tas6424->last_fault2 = reg; 507 goto check_warn_reg; 508 } 509 510 if ((reg & TAS6424_FAULT_OTSD) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD)) 511 dev_crit(dev, "experienced a global overtemp shutdown\n"); 512 513 if ((reg & TAS6424_FAULT_OTSD_CH1) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH1)) 514 dev_crit(dev, "experienced an overtemp shutdown on CH1\n"); 515 516 if ((reg & TAS6424_FAULT_OTSD_CH2) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH2)) 517 dev_crit(dev, "experienced an overtemp shutdown on CH2\n"); 518 519 if ((reg & TAS6424_FAULT_OTSD_CH3) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH3)) 520 dev_crit(dev, "experienced an overtemp shutdown on CH3\n"); 521 522 if ((reg & TAS6424_FAULT_OTSD_CH4) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH4)) 523 dev_crit(dev, "experienced an overtemp shutdown on CH4\n"); 524 525 /* Store current fault2 value so we can detect any changes next time */ 526 tas6424->last_fault2 = reg; 527 528 check_warn_reg: 529 ret = regmap_read(tas6424->regmap, TAS6424_WARN, ®); 530 if (ret < 0) { 531 dev_err(dev, "failed to read WARN register: %d\n", ret); 532 goto out; 533 } 534 535 reg &= TAS6424_WARN_VDD_UV | 536 TAS6424_WARN_VDD_POR | 537 TAS6424_WARN_VDD_OTW | 538 TAS6424_WARN_VDD_OTW_CH1 | 539 TAS6424_WARN_VDD_OTW_CH2 | 540 TAS6424_WARN_VDD_OTW_CH3 | 541 TAS6424_WARN_VDD_OTW_CH4; 542 543 if (!reg) { 544 tas6424->last_warn = reg; 545 goto out; 546 } 547 548 if ((reg & TAS6424_WARN_VDD_UV) && !(tas6424->last_warn & TAS6424_WARN_VDD_UV)) 549 dev_warn(dev, "experienced a VDD under voltage condition\n"); 550 551 if ((reg & TAS6424_WARN_VDD_POR) && !(tas6424->last_warn & TAS6424_WARN_VDD_POR)) 552 dev_warn(dev, "experienced a VDD POR condition\n"); 553 554 if ((reg & TAS6424_WARN_VDD_OTW) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW)) 555 dev_warn(dev, "experienced a global overtemp warning\n"); 556 557 if ((reg & TAS6424_WARN_VDD_OTW_CH1) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH1)) 558 dev_warn(dev, "experienced an overtemp warning on CH1\n"); 559 560 if ((reg & TAS6424_WARN_VDD_OTW_CH2) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH2)) 561 dev_warn(dev, "experienced an overtemp warning on CH2\n"); 562 563 if ((reg & TAS6424_WARN_VDD_OTW_CH3) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH3)) 564 dev_warn(dev, "experienced an overtemp warning on CH3\n"); 565 566 if ((reg & TAS6424_WARN_VDD_OTW_CH4) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH4)) 567 dev_warn(dev, "experienced an overtemp warning on CH4\n"); 568 569 /* Store current warn value so we can detect any changes next time */ 570 tas6424->last_warn = reg; 571 572 /* Clear any warnings by toggling the CLEAR_FAULT control bit */ 573 ret = regmap_write_bits(tas6424->regmap, TAS6424_MISC_CTRL3, 574 TAS6424_CLEAR_FAULT, TAS6424_CLEAR_FAULT); 575 if (ret < 0) 576 dev_err(dev, "failed to write MISC_CTRL3 register: %d\n", ret); 577 578 ret = regmap_write_bits(tas6424->regmap, TAS6424_MISC_CTRL3, 579 TAS6424_CLEAR_FAULT, 0); 580 if (ret < 0) 581 dev_err(dev, "failed to write MISC_CTRL3 register: %d\n", ret); 582 583 out: 584 /* Schedule the next fault check at the specified interval */ 585 schedule_delayed_work(&tas6424->fault_check_work, 586 msecs_to_jiffies(TAS6424_FAULT_CHECK_INTERVAL)); 587 } 588 589 static const struct reg_default tas6424_reg_defaults[] = { 590 { TAS6424_MODE_CTRL, 0x00 }, 591 { TAS6424_MISC_CTRL1, 0x32 }, 592 { TAS6424_MISC_CTRL2, 0x62 }, 593 { TAS6424_SAP_CTRL, 0x04 }, 594 { TAS6424_CH_STATE_CTRL, 0x55 }, 595 { TAS6424_CH1_VOL_CTRL, 0xcf }, 596 { TAS6424_CH2_VOL_CTRL, 0xcf }, 597 { TAS6424_CH3_VOL_CTRL, 0xcf }, 598 { TAS6424_CH4_VOL_CTRL, 0xcf }, 599 { TAS6424_DC_DIAG_CTRL1, 0x00 }, 600 { TAS6424_DC_DIAG_CTRL2, 0x11 }, 601 { TAS6424_DC_DIAG_CTRL3, 0x11 }, 602 { TAS6424_PIN_CTRL, 0xff }, 603 { TAS6424_AC_DIAG_CTRL1, 0x00 }, 604 { TAS6424_MISC_CTRL3, 0x00 }, 605 { TAS6424_CLIP_CTRL, 0x01 }, 606 { TAS6424_CLIP_WINDOW, 0x14 }, 607 { TAS6424_CLIP_WARN, 0x00 }, 608 { TAS6424_CBC_STAT, 0x00 }, 609 { TAS6424_MISC_CTRL4, 0x40 }, 610 }; 611 tas6424_is_writable_reg(struct device * dev,unsigned int reg)612 static bool tas6424_is_writable_reg(struct device *dev, unsigned int reg) 613 { 614 switch (reg) { 615 case TAS6424_MODE_CTRL: 616 case TAS6424_MISC_CTRL1: 617 case TAS6424_MISC_CTRL2: 618 case TAS6424_SAP_CTRL: 619 case TAS6424_CH_STATE_CTRL: 620 case TAS6424_CH1_VOL_CTRL: 621 case TAS6424_CH2_VOL_CTRL: 622 case TAS6424_CH3_VOL_CTRL: 623 case TAS6424_CH4_VOL_CTRL: 624 case TAS6424_DC_DIAG_CTRL1: 625 case TAS6424_DC_DIAG_CTRL2: 626 case TAS6424_DC_DIAG_CTRL3: 627 case TAS6424_PIN_CTRL: 628 case TAS6424_AC_DIAG_CTRL1: 629 case TAS6424_MISC_CTRL3: 630 case TAS6424_CLIP_CTRL: 631 case TAS6424_CLIP_WINDOW: 632 case TAS6424_CLIP_WARN: 633 case TAS6424_CBC_STAT: 634 case TAS6424_MISC_CTRL4: 635 return true; 636 default: 637 return false; 638 } 639 } 640 tas6424_is_volatile_reg(struct device * dev,unsigned int reg)641 static bool tas6424_is_volatile_reg(struct device *dev, unsigned int reg) 642 { 643 switch (reg) { 644 case TAS6424_DC_LOAD_DIAG_REP12: 645 case TAS6424_DC_LOAD_DIAG_REP34: 646 case TAS6424_DC_LOAD_DIAG_REPLO: 647 case TAS6424_CHANNEL_STATE: 648 case TAS6424_CHANNEL_FAULT: 649 case TAS6424_GLOB_FAULT1: 650 case TAS6424_GLOB_FAULT2: 651 case TAS6424_WARN: 652 case TAS6424_AC_LOAD_DIAG_REP1: 653 case TAS6424_AC_LOAD_DIAG_REP2: 654 case TAS6424_AC_LOAD_DIAG_REP3: 655 case TAS6424_AC_LOAD_DIAG_REP4: 656 return true; 657 default: 658 return false; 659 } 660 } 661 662 static const struct regmap_config tas6424_regmap_config = { 663 .reg_bits = 8, 664 .val_bits = 8, 665 666 .writeable_reg = tas6424_is_writable_reg, 667 .volatile_reg = tas6424_is_volatile_reg, 668 669 .max_register = TAS6424_MAX, 670 .reg_defaults = tas6424_reg_defaults, 671 .num_reg_defaults = ARRAY_SIZE(tas6424_reg_defaults), 672 .cache_type = REGCACHE_RBTREE, 673 }; 674 675 #if IS_ENABLED(CONFIG_OF) 676 static const struct of_device_id tas6424_of_ids[] = { 677 { .compatible = "ti,tas6424", }, 678 { }, 679 }; 680 MODULE_DEVICE_TABLE(of, tas6424_of_ids); 681 #endif 682 tas6424_i2c_probe(struct i2c_client * client)683 static int tas6424_i2c_probe(struct i2c_client *client) 684 { 685 struct device *dev = &client->dev; 686 struct tas6424_data *tas6424; 687 int ret; 688 int i; 689 690 tas6424 = devm_kzalloc(dev, sizeof(*tas6424), GFP_KERNEL); 691 if (!tas6424) 692 return -ENOMEM; 693 dev_set_drvdata(dev, tas6424); 694 695 tas6424->dev = dev; 696 697 tas6424->regmap = devm_regmap_init_i2c(client, &tas6424_regmap_config); 698 if (IS_ERR(tas6424->regmap)) { 699 ret = PTR_ERR(tas6424->regmap); 700 dev_err(dev, "unable to allocate register map: %d\n", ret); 701 return ret; 702 } 703 704 /* 705 * Get control of the standby pin and set it LOW to take the codec 706 * out of the stand-by mode. 707 * Note: The actual pin polarity is taken care of in the GPIO lib 708 * according the polarity specified in the DTS. 709 */ 710 tas6424->standby_gpio = devm_gpiod_get_optional(dev, "standby", 711 GPIOD_OUT_LOW); 712 if (IS_ERR(tas6424->standby_gpio)) { 713 if (PTR_ERR(tas6424->standby_gpio) == -EPROBE_DEFER) 714 return -EPROBE_DEFER; 715 dev_info(dev, "failed to get standby GPIO: %ld\n", 716 PTR_ERR(tas6424->standby_gpio)); 717 tas6424->standby_gpio = NULL; 718 } 719 720 /* 721 * Get control of the mute pin and set it HIGH in order to start with 722 * all the output muted. 723 * Note: The actual pin polarity is taken care of in the GPIO lib 724 * according the polarity specified in the DTS. 725 */ 726 tas6424->mute_gpio = devm_gpiod_get_optional(dev, "mute", 727 GPIOD_OUT_HIGH); 728 if (IS_ERR(tas6424->mute_gpio)) { 729 if (PTR_ERR(tas6424->mute_gpio) == -EPROBE_DEFER) 730 return -EPROBE_DEFER; 731 dev_info(dev, "failed to get nmute GPIO: %ld\n", 732 PTR_ERR(tas6424->mute_gpio)); 733 tas6424->mute_gpio = NULL; 734 } 735 736 for (i = 0; i < ARRAY_SIZE(tas6424->supplies); i++) 737 tas6424->supplies[i].supply = tas6424_supply_names[i]; 738 ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(tas6424->supplies), 739 tas6424->supplies); 740 if (ret) { 741 dev_err(dev, "unable to request supplies: %d\n", ret); 742 return ret; 743 } 744 745 ret = regulator_bulk_enable(ARRAY_SIZE(tas6424->supplies), 746 tas6424->supplies); 747 if (ret) { 748 dev_err(dev, "unable to enable supplies: %d\n", ret); 749 return ret; 750 } 751 752 /* Reset device to establish well-defined startup state */ 753 ret = regmap_update_bits(tas6424->regmap, TAS6424_MODE_CTRL, 754 TAS6424_RESET, TAS6424_RESET); 755 if (ret) { 756 dev_err(dev, "unable to reset device: %d\n", ret); 757 goto disable_regs; 758 } 759 760 INIT_DELAYED_WORK(&tas6424->fault_check_work, tas6424_fault_check_work); 761 762 ret = devm_snd_soc_register_component(dev, &soc_codec_dev_tas6424, 763 tas6424_dai, ARRAY_SIZE(tas6424_dai)); 764 if (ret < 0) { 765 dev_err(dev, "unable to register codec: %d\n", ret); 766 goto disable_regs; 767 } 768 769 return 0; 770 771 disable_regs: 772 regulator_bulk_disable(ARRAY_SIZE(tas6424->supplies), tas6424->supplies); 773 return ret; 774 } 775 tas6424_i2c_remove(struct i2c_client * client)776 static void tas6424_i2c_remove(struct i2c_client *client) 777 { 778 struct device *dev = &client->dev; 779 struct tas6424_data *tas6424 = dev_get_drvdata(dev); 780 int ret; 781 782 cancel_delayed_work_sync(&tas6424->fault_check_work); 783 784 /* put the codec in stand-by */ 785 if (tas6424->standby_gpio) 786 gpiod_set_value_cansleep(tas6424->standby_gpio, 1); 787 788 ret = regulator_bulk_disable(ARRAY_SIZE(tas6424->supplies), 789 tas6424->supplies); 790 if (ret < 0) 791 dev_err(dev, "unable to disable supplies: %d\n", ret); 792 } 793 794 static const struct i2c_device_id tas6424_i2c_ids[] = { 795 { "tas6424", 0 }, 796 { } 797 }; 798 MODULE_DEVICE_TABLE(i2c, tas6424_i2c_ids); 799 800 static struct i2c_driver tas6424_i2c_driver = { 801 .driver = { 802 .name = "tas6424", 803 .of_match_table = of_match_ptr(tas6424_of_ids), 804 }, 805 .probe = tas6424_i2c_probe, 806 .remove = tas6424_i2c_remove, 807 .id_table = tas6424_i2c_ids, 808 }; 809 module_i2c_driver(tas6424_i2c_driver); 810 811 MODULE_AUTHOR("Andreas Dannenberg <dannenberg@ti.com>"); 812 MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); 813 MODULE_DESCRIPTION("TAS6424 Audio amplifier driver"); 814 MODULE_LICENSE("GPL v2"); 815
