1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
4 */
5
6 #if defined(CONFIG_SERIAL_NETX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
7 #define SUPPORT_SYSRQ
8 #endif
9
10 #include <linux/device.h>
11 #include <linux/module.h>
12 #include <linux/ioport.h>
13 #include <linux/init.h>
14 #include <linux/console.h>
15 #include <linux/sysrq.h>
16 #include <linux/platform_device.h>
17 #include <linux/tty.h>
18 #include <linux/tty_flip.h>
19 #include <linux/serial_core.h>
20 #include <linux/serial.h>
21
22 #include <asm/io.h>
23 #include <asm/irq.h>
24 #include <mach/hardware.h>
25 #include <mach/netx-regs.h>
26
27 /* We've been assigned a range on the "Low-density serial ports" major */
28 #define SERIAL_NX_MAJOR 204
29 #define MINOR_START 170
30
31 enum uart_regs {
32 UART_DR = 0x00,
33 UART_SR = 0x04,
34 UART_LINE_CR = 0x08,
35 UART_BAUDDIV_MSB = 0x0c,
36 UART_BAUDDIV_LSB = 0x10,
37 UART_CR = 0x14,
38 UART_FR = 0x18,
39 UART_IIR = 0x1c,
40 UART_ILPR = 0x20,
41 UART_RTS_CR = 0x24,
42 UART_RTS_LEAD = 0x28,
43 UART_RTS_TRAIL = 0x2c,
44 UART_DRV_ENABLE = 0x30,
45 UART_BRM_CR = 0x34,
46 UART_RXFIFO_IRQLEVEL = 0x38,
47 UART_TXFIFO_IRQLEVEL = 0x3c,
48 };
49
50 #define SR_FE (1<<0)
51 #define SR_PE (1<<1)
52 #define SR_BE (1<<2)
53 #define SR_OE (1<<3)
54
55 #define LINE_CR_BRK (1<<0)
56 #define LINE_CR_PEN (1<<1)
57 #define LINE_CR_EPS (1<<2)
58 #define LINE_CR_STP2 (1<<3)
59 #define LINE_CR_FEN (1<<4)
60 #define LINE_CR_5BIT (0<<5)
61 #define LINE_CR_6BIT (1<<5)
62 #define LINE_CR_7BIT (2<<5)
63 #define LINE_CR_8BIT (3<<5)
64 #define LINE_CR_BITS_MASK (3<<5)
65
66 #define CR_UART_EN (1<<0)
67 #define CR_SIREN (1<<1)
68 #define CR_SIRLP (1<<2)
69 #define CR_MSIE (1<<3)
70 #define CR_RIE (1<<4)
71 #define CR_TIE (1<<5)
72 #define CR_RTIE (1<<6)
73 #define CR_LBE (1<<7)
74
75 #define FR_CTS (1<<0)
76 #define FR_DSR (1<<1)
77 #define FR_DCD (1<<2)
78 #define FR_BUSY (1<<3)
79 #define FR_RXFE (1<<4)
80 #define FR_TXFF (1<<5)
81 #define FR_RXFF (1<<6)
82 #define FR_TXFE (1<<7)
83
84 #define IIR_MIS (1<<0)
85 #define IIR_RIS (1<<1)
86 #define IIR_TIS (1<<2)
87 #define IIR_RTIS (1<<3)
88 #define IIR_MASK 0xf
89
90 #define RTS_CR_AUTO (1<<0)
91 #define RTS_CR_RTS (1<<1)
92 #define RTS_CR_COUNT (1<<2)
93 #define RTS_CR_MOD2 (1<<3)
94 #define RTS_CR_RTS_POL (1<<4)
95 #define RTS_CR_CTS_CTR (1<<5)
96 #define RTS_CR_CTS_POL (1<<6)
97 #define RTS_CR_STICK (1<<7)
98
99 #define UART_PORT_SIZE 0x40
100 #define DRIVER_NAME "netx-uart"
101
102 struct netx_port {
103 struct uart_port port;
104 };
105
netx_stop_tx(struct uart_port * port)106 static void netx_stop_tx(struct uart_port *port)
107 {
108 unsigned int val;
109 val = readl(port->membase + UART_CR);
110 writel(val & ~CR_TIE, port->membase + UART_CR);
111 }
112
netx_stop_rx(struct uart_port * port)113 static void netx_stop_rx(struct uart_port *port)
114 {
115 unsigned int val;
116 val = readl(port->membase + UART_CR);
117 writel(val & ~CR_RIE, port->membase + UART_CR);
118 }
119
netx_enable_ms(struct uart_port * port)120 static void netx_enable_ms(struct uart_port *port)
121 {
122 unsigned int val;
123 val = readl(port->membase + UART_CR);
124 writel(val | CR_MSIE, port->membase + UART_CR);
125 }
126
netx_transmit_buffer(struct uart_port * port)127 static inline void netx_transmit_buffer(struct uart_port *port)
128 {
129 struct circ_buf *xmit = &port->state->xmit;
130
131 if (port->x_char) {
132 writel(port->x_char, port->membase + UART_DR);
133 port->icount.tx++;
134 port->x_char = 0;
135 return;
136 }
137
138 if (uart_tx_stopped(port) || uart_circ_empty(xmit)) {
139 netx_stop_tx(port);
140 return;
141 }
142
143 do {
144 /* send xmit->buf[xmit->tail]
145 * out the port here */
146 writel(xmit->buf[xmit->tail], port->membase + UART_DR);
147 xmit->tail = (xmit->tail + 1) &
148 (UART_XMIT_SIZE - 1);
149 port->icount.tx++;
150 if (uart_circ_empty(xmit))
151 break;
152 } while (!(readl(port->membase + UART_FR) & FR_TXFF));
153
154 if (uart_circ_empty(xmit))
155 netx_stop_tx(port);
156 }
157
netx_start_tx(struct uart_port * port)158 static void netx_start_tx(struct uart_port *port)
159 {
160 writel(
161 readl(port->membase + UART_CR) | CR_TIE, port->membase + UART_CR);
162
163 if (!(readl(port->membase + UART_FR) & FR_TXFF))
164 netx_transmit_buffer(port);
165 }
166
netx_tx_empty(struct uart_port * port)167 static unsigned int netx_tx_empty(struct uart_port *port)
168 {
169 return readl(port->membase + UART_FR) & FR_BUSY ? 0 : TIOCSER_TEMT;
170 }
171
netx_txint(struct uart_port * port)172 static void netx_txint(struct uart_port *port)
173 {
174 struct circ_buf *xmit = &port->state->xmit;
175
176 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
177 netx_stop_tx(port);
178 return;
179 }
180
181 netx_transmit_buffer(port);
182
183 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
184 uart_write_wakeup(port);
185 }
186
netx_rxint(struct uart_port * port,unsigned long * flags)187 static void netx_rxint(struct uart_port *port, unsigned long *flags)
188 {
189 unsigned char rx, flg, status;
190
191 while (!(readl(port->membase + UART_FR) & FR_RXFE)) {
192 rx = readl(port->membase + UART_DR);
193 flg = TTY_NORMAL;
194 port->icount.rx++;
195 status = readl(port->membase + UART_SR);
196 if (status & SR_BE) {
197 writel(0, port->membase + UART_SR);
198 if (uart_handle_break(port))
199 continue;
200 }
201
202 if (unlikely(status & (SR_FE | SR_PE | SR_OE))) {
203
204 if (status & SR_PE)
205 port->icount.parity++;
206 else if (status & SR_FE)
207 port->icount.frame++;
208 if (status & SR_OE)
209 port->icount.overrun++;
210
211 status &= port->read_status_mask;
212
213 if (status & SR_BE)
214 flg = TTY_BREAK;
215 else if (status & SR_PE)
216 flg = TTY_PARITY;
217 else if (status & SR_FE)
218 flg = TTY_FRAME;
219 }
220
221 if (uart_handle_sysrq_char(port, rx))
222 continue;
223
224 uart_insert_char(port, status, SR_OE, rx, flg);
225 }
226
227 spin_unlock_irqrestore(&port->lock, *flags);
228 tty_flip_buffer_push(&port->state->port);
229 spin_lock_irqsave(&port->lock, *flags);
230 }
231
netx_int(int irq,void * dev_id)232 static irqreturn_t netx_int(int irq, void *dev_id)
233 {
234 struct uart_port *port = dev_id;
235 unsigned long flags;
236 unsigned char status;
237
238 spin_lock_irqsave(&port->lock,flags);
239
240 status = readl(port->membase + UART_IIR) & IIR_MASK;
241 while (status) {
242 if (status & IIR_RIS)
243 netx_rxint(port, &flags);
244 if (status & IIR_TIS)
245 netx_txint(port);
246 if (status & IIR_MIS) {
247 if (readl(port->membase + UART_FR) & FR_CTS)
248 uart_handle_cts_change(port, 1);
249 else
250 uart_handle_cts_change(port, 0);
251 }
252 writel(0, port->membase + UART_IIR);
253 status = readl(port->membase + UART_IIR) & IIR_MASK;
254 }
255
256 spin_unlock_irqrestore(&port->lock,flags);
257 return IRQ_HANDLED;
258 }
259
netx_get_mctrl(struct uart_port * port)260 static unsigned int netx_get_mctrl(struct uart_port *port)
261 {
262 unsigned int ret = TIOCM_DSR | TIOCM_CAR;
263
264 if (readl(port->membase + UART_FR) & FR_CTS)
265 ret |= TIOCM_CTS;
266
267 return ret;
268 }
269
netx_set_mctrl(struct uart_port * port,unsigned int mctrl)270 static void netx_set_mctrl(struct uart_port *port, unsigned int mctrl)
271 {
272 unsigned int val;
273
274 /* FIXME: Locking needed ? */
275 if (mctrl & TIOCM_RTS) {
276 val = readl(port->membase + UART_RTS_CR);
277 writel(val | RTS_CR_RTS, port->membase + UART_RTS_CR);
278 }
279 }
280
netx_break_ctl(struct uart_port * port,int break_state)281 static void netx_break_ctl(struct uart_port *port, int break_state)
282 {
283 unsigned int line_cr;
284 spin_lock_irq(&port->lock);
285
286 line_cr = readl(port->membase + UART_LINE_CR);
287 if (break_state != 0)
288 line_cr |= LINE_CR_BRK;
289 else
290 line_cr &= ~LINE_CR_BRK;
291 writel(line_cr, port->membase + UART_LINE_CR);
292
293 spin_unlock_irq(&port->lock);
294 }
295
netx_startup(struct uart_port * port)296 static int netx_startup(struct uart_port *port)
297 {
298 int ret;
299
300 ret = request_irq(port->irq, netx_int, 0,
301 DRIVER_NAME, port);
302 if (ret) {
303 dev_err(port->dev, "unable to grab irq%d\n",port->irq);
304 goto exit;
305 }
306
307 writel(readl(port->membase + UART_LINE_CR) | LINE_CR_FEN,
308 port->membase + UART_LINE_CR);
309
310 writel(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE | CR_UART_EN,
311 port->membase + UART_CR);
312
313 exit:
314 return ret;
315 }
316
netx_shutdown(struct uart_port * port)317 static void netx_shutdown(struct uart_port *port)
318 {
319 writel(0, port->membase + UART_CR) ;
320
321 free_irq(port->irq, port);
322 }
323
324 static void
netx_set_termios(struct uart_port * port,struct ktermios * termios,struct ktermios * old)325 netx_set_termios(struct uart_port *port, struct ktermios *termios,
326 struct ktermios *old)
327 {
328 unsigned int baud, quot;
329 unsigned char old_cr;
330 unsigned char line_cr = LINE_CR_FEN;
331 unsigned char rts_cr = 0;
332
333 switch (termios->c_cflag & CSIZE) {
334 case CS5:
335 line_cr |= LINE_CR_5BIT;
336 break;
337 case CS6:
338 line_cr |= LINE_CR_6BIT;
339 break;
340 case CS7:
341 line_cr |= LINE_CR_7BIT;
342 break;
343 case CS8:
344 line_cr |= LINE_CR_8BIT;
345 break;
346 }
347
348 if (termios->c_cflag & CSTOPB)
349 line_cr |= LINE_CR_STP2;
350
351 if (termios->c_cflag & PARENB) {
352 line_cr |= LINE_CR_PEN;
353 if (!(termios->c_cflag & PARODD))
354 line_cr |= LINE_CR_EPS;
355 }
356
357 if (termios->c_cflag & CRTSCTS)
358 rts_cr = RTS_CR_AUTO | RTS_CR_CTS_CTR | RTS_CR_RTS_POL;
359
360 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
361 quot = baud * 4096;
362 quot /= 1000;
363 quot *= 256;
364 quot /= 100000;
365
366 spin_lock_irq(&port->lock);
367
368 uart_update_timeout(port, termios->c_cflag, baud);
369
370 old_cr = readl(port->membase + UART_CR);
371
372 /* disable interrupts */
373 writel(old_cr & ~(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE),
374 port->membase + UART_CR);
375
376 /* drain transmitter */
377 while (readl(port->membase + UART_FR) & FR_BUSY);
378
379 /* disable UART */
380 writel(old_cr & ~CR_UART_EN, port->membase + UART_CR);
381
382 /* modem status interrupts */
383 old_cr &= ~CR_MSIE;
384 if (UART_ENABLE_MS(port, termios->c_cflag))
385 old_cr |= CR_MSIE;
386
387 writel((quot>>8) & 0xff, port->membase + UART_BAUDDIV_MSB);
388 writel(quot & 0xff, port->membase + UART_BAUDDIV_LSB);
389 writel(line_cr, port->membase + UART_LINE_CR);
390
391 writel(rts_cr, port->membase + UART_RTS_CR);
392
393 /*
394 * Characters to ignore
395 */
396 port->ignore_status_mask = 0;
397 if (termios->c_iflag & IGNPAR)
398 port->ignore_status_mask |= SR_PE;
399 if (termios->c_iflag & IGNBRK) {
400 port->ignore_status_mask |= SR_BE;
401 /*
402 * If we're ignoring parity and break indicators,
403 * ignore overruns too (for real raw support).
404 */
405 if (termios->c_iflag & IGNPAR)
406 port->ignore_status_mask |= SR_PE;
407 }
408
409 port->read_status_mask = 0;
410 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
411 port->read_status_mask |= SR_BE;
412 if (termios->c_iflag & INPCK)
413 port->read_status_mask |= SR_PE | SR_FE;
414
415 writel(old_cr, port->membase + UART_CR);
416
417 spin_unlock_irq(&port->lock);
418 }
419
netx_type(struct uart_port * port)420 static const char *netx_type(struct uart_port *port)
421 {
422 return port->type == PORT_NETX ? "NETX" : NULL;
423 }
424
netx_release_port(struct uart_port * port)425 static void netx_release_port(struct uart_port *port)
426 {
427 release_mem_region(port->mapbase, UART_PORT_SIZE);
428 }
429
netx_request_port(struct uart_port * port)430 static int netx_request_port(struct uart_port *port)
431 {
432 return request_mem_region(port->mapbase, UART_PORT_SIZE,
433 DRIVER_NAME) != NULL ? 0 : -EBUSY;
434 }
435
netx_config_port(struct uart_port * port,int flags)436 static void netx_config_port(struct uart_port *port, int flags)
437 {
438 if (flags & UART_CONFIG_TYPE && netx_request_port(port) == 0)
439 port->type = PORT_NETX;
440 }
441
442 static int
netx_verify_port(struct uart_port * port,struct serial_struct * ser)443 netx_verify_port(struct uart_port *port, struct serial_struct *ser)
444 {
445 int ret = 0;
446
447 if (ser->type != PORT_UNKNOWN && ser->type != PORT_NETX)
448 ret = -EINVAL;
449
450 return ret;
451 }
452
453 static struct uart_ops netx_pops = {
454 .tx_empty = netx_tx_empty,
455 .set_mctrl = netx_set_mctrl,
456 .get_mctrl = netx_get_mctrl,
457 .stop_tx = netx_stop_tx,
458 .start_tx = netx_start_tx,
459 .stop_rx = netx_stop_rx,
460 .enable_ms = netx_enable_ms,
461 .break_ctl = netx_break_ctl,
462 .startup = netx_startup,
463 .shutdown = netx_shutdown,
464 .set_termios = netx_set_termios,
465 .type = netx_type,
466 .release_port = netx_release_port,
467 .request_port = netx_request_port,
468 .config_port = netx_config_port,
469 .verify_port = netx_verify_port,
470 };
471
472 static struct netx_port netx_ports[] = {
473 {
474 .port = {
475 .type = PORT_NETX,
476 .iotype = UPIO_MEM,
477 .membase = (char __iomem *)io_p2v(NETX_PA_UART0),
478 .mapbase = NETX_PA_UART0,
479 .irq = NETX_IRQ_UART0,
480 .uartclk = 100000000,
481 .fifosize = 16,
482 .flags = UPF_BOOT_AUTOCONF,
483 .ops = &netx_pops,
484 .line = 0,
485 },
486 }, {
487 .port = {
488 .type = PORT_NETX,
489 .iotype = UPIO_MEM,
490 .membase = (char __iomem *)io_p2v(NETX_PA_UART1),
491 .mapbase = NETX_PA_UART1,
492 .irq = NETX_IRQ_UART1,
493 .uartclk = 100000000,
494 .fifosize = 16,
495 .flags = UPF_BOOT_AUTOCONF,
496 .ops = &netx_pops,
497 .line = 1,
498 },
499 }, {
500 .port = {
501 .type = PORT_NETX,
502 .iotype = UPIO_MEM,
503 .membase = (char __iomem *)io_p2v(NETX_PA_UART2),
504 .mapbase = NETX_PA_UART2,
505 .irq = NETX_IRQ_UART2,
506 .uartclk = 100000000,
507 .fifosize = 16,
508 .flags = UPF_BOOT_AUTOCONF,
509 .ops = &netx_pops,
510 .line = 2,
511 },
512 }
513 };
514
515 #ifdef CONFIG_SERIAL_NETX_CONSOLE
516
netx_console_putchar(struct uart_port * port,int ch)517 static void netx_console_putchar(struct uart_port *port, int ch)
518 {
519 while (readl(port->membase + UART_FR) & FR_BUSY);
520 writel(ch, port->membase + UART_DR);
521 }
522
523 static void
netx_console_write(struct console * co,const char * s,unsigned int count)524 netx_console_write(struct console *co, const char *s, unsigned int count)
525 {
526 struct uart_port *port = &netx_ports[co->index].port;
527 unsigned char cr_save;
528
529 cr_save = readl(port->membase + UART_CR);
530 writel(cr_save | CR_UART_EN, port->membase + UART_CR);
531
532 uart_console_write(port, s, count, netx_console_putchar);
533
534 while (readl(port->membase + UART_FR) & FR_BUSY);
535 writel(cr_save, port->membase + UART_CR);
536 }
537
538 static void __init
netx_console_get_options(struct uart_port * port,int * baud,int * parity,int * bits,int * flow)539 netx_console_get_options(struct uart_port *port, int *baud,
540 int *parity, int *bits, int *flow)
541 {
542 unsigned char line_cr;
543
544 *baud = (readl(port->membase + UART_BAUDDIV_MSB) << 8) |
545 readl(port->membase + UART_BAUDDIV_LSB);
546 *baud *= 1000;
547 *baud /= 4096;
548 *baud *= 1000;
549 *baud /= 256;
550 *baud *= 100;
551
552 line_cr = readl(port->membase + UART_LINE_CR);
553 *parity = 'n';
554 if (line_cr & LINE_CR_PEN) {
555 if (line_cr & LINE_CR_EPS)
556 *parity = 'e';
557 else
558 *parity = 'o';
559 }
560
561 switch (line_cr & LINE_CR_BITS_MASK) {
562 case LINE_CR_8BIT:
563 *bits = 8;
564 break;
565 case LINE_CR_7BIT:
566 *bits = 7;
567 break;
568 case LINE_CR_6BIT:
569 *bits = 6;
570 break;
571 case LINE_CR_5BIT:
572 *bits = 5;
573 break;
574 }
575
576 if (readl(port->membase + UART_RTS_CR) & RTS_CR_AUTO)
577 *flow = 'r';
578 }
579
580 static int __init
netx_console_setup(struct console * co,char * options)581 netx_console_setup(struct console *co, char *options)
582 {
583 struct netx_port *sport;
584 int baud = 9600;
585 int bits = 8;
586 int parity = 'n';
587 int flow = 'n';
588
589 /*
590 * Check whether an invalid uart number has been specified, and
591 * if so, search for the first available port that does have
592 * console support.
593 */
594 if (co->index == -1 || co->index >= ARRAY_SIZE(netx_ports))
595 co->index = 0;
596 sport = &netx_ports[co->index];
597
598 if (options) {
599 uart_parse_options(options, &baud, &parity, &bits, &flow);
600 } else {
601 /* if the UART is enabled, assume it has been correctly setup
602 * by the bootloader and get the options
603 */
604 if (readl(sport->port.membase + UART_CR) & CR_UART_EN) {
605 netx_console_get_options(&sport->port, &baud,
606 &parity, &bits, &flow);
607 }
608
609 }
610
611 return uart_set_options(&sport->port, co, baud, parity, bits, flow);
612 }
613
614 static struct uart_driver netx_reg;
615 static struct console netx_console = {
616 .name = "ttyNX",
617 .write = netx_console_write,
618 .device = uart_console_device,
619 .setup = netx_console_setup,
620 .flags = CON_PRINTBUFFER,
621 .index = -1,
622 .data = &netx_reg,
623 };
624
netx_console_init(void)625 static int __init netx_console_init(void)
626 {
627 register_console(&netx_console);
628 return 0;
629 }
630 console_initcall(netx_console_init);
631
632 #define NETX_CONSOLE &netx_console
633 #else
634 #define NETX_CONSOLE NULL
635 #endif
636
637 static struct uart_driver netx_reg = {
638 .owner = THIS_MODULE,
639 .driver_name = DRIVER_NAME,
640 .dev_name = "ttyNX",
641 .major = SERIAL_NX_MAJOR,
642 .minor = MINOR_START,
643 .nr = ARRAY_SIZE(netx_ports),
644 .cons = NETX_CONSOLE,
645 };
646
serial_netx_suspend(struct platform_device * pdev,pm_message_t state)647 static int serial_netx_suspend(struct platform_device *pdev, pm_message_t state)
648 {
649 struct netx_port *sport = platform_get_drvdata(pdev);
650
651 if (sport)
652 uart_suspend_port(&netx_reg, &sport->port);
653
654 return 0;
655 }
656
serial_netx_resume(struct platform_device * pdev)657 static int serial_netx_resume(struct platform_device *pdev)
658 {
659 struct netx_port *sport = platform_get_drvdata(pdev);
660
661 if (sport)
662 uart_resume_port(&netx_reg, &sport->port);
663
664 return 0;
665 }
666
serial_netx_probe(struct platform_device * pdev)667 static int serial_netx_probe(struct platform_device *pdev)
668 {
669 struct uart_port *port = &netx_ports[pdev->id].port;
670
671 dev_info(&pdev->dev, "initialising\n");
672
673 port->dev = &pdev->dev;
674
675 writel(1, port->membase + UART_RXFIFO_IRQLEVEL);
676 uart_add_one_port(&netx_reg, &netx_ports[pdev->id].port);
677 platform_set_drvdata(pdev, &netx_ports[pdev->id]);
678
679 return 0;
680 }
681
serial_netx_remove(struct platform_device * pdev)682 static int serial_netx_remove(struct platform_device *pdev)
683 {
684 struct netx_port *sport = platform_get_drvdata(pdev);
685
686 if (sport)
687 uart_remove_one_port(&netx_reg, &sport->port);
688
689 return 0;
690 }
691
692 static struct platform_driver serial_netx_driver = {
693 .probe = serial_netx_probe,
694 .remove = serial_netx_remove,
695
696 .suspend = serial_netx_suspend,
697 .resume = serial_netx_resume,
698
699 .driver = {
700 .name = DRIVER_NAME,
701 },
702 };
703
netx_serial_init(void)704 static int __init netx_serial_init(void)
705 {
706 int ret;
707
708 printk(KERN_INFO "Serial: NetX driver\n");
709
710 ret = uart_register_driver(&netx_reg);
711 if (ret)
712 return ret;
713
714 ret = platform_driver_register(&serial_netx_driver);
715 if (ret != 0)
716 uart_unregister_driver(&netx_reg);
717
718 return 0;
719 }
720
netx_serial_exit(void)721 static void __exit netx_serial_exit(void)
722 {
723 platform_driver_unregister(&serial_netx_driver);
724 uart_unregister_driver(&netx_reg);
725 }
726
727 module_init(netx_serial_init);
728 module_exit(netx_serial_exit);
729
730 MODULE_AUTHOR("Sascha Hauer");
731 MODULE_DESCRIPTION("NetX serial port driver");
732 MODULE_LICENSE("GPL");
733 MODULE_ALIAS("platform:" DRIVER_NAME);
734
