1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* $Id: sungem.h,v 1.10.2.4 2002/03/11 08:54:48 davem Exp $ 3 * sungem.h: Definitions for Sun GEM ethernet driver. 4 * 5 * Copyright (C) 2000 David S. Miller (davem@redhat.com) 6 */ 7 8 #ifndef _SUNGEM_H 9 #define _SUNGEM_H 10 11 /* Global Registers */ 12 #define GREG_SEBSTATE 0x0000UL /* SEB State Register */ 13 #define GREG_CFG 0x0004UL /* Configuration Register */ 14 #define GREG_STAT 0x000CUL /* Status Register */ 15 #define GREG_IMASK 0x0010UL /* Interrupt Mask Register */ 16 #define GREG_IACK 0x0014UL /* Interrupt ACK Register */ 17 #define GREG_STAT2 0x001CUL /* Alias of GREG_STAT */ 18 #define GREG_PCIESTAT 0x1000UL /* PCI Error Status Register */ 19 #define GREG_PCIEMASK 0x1004UL /* PCI Error Mask Register */ 20 #define GREG_BIFCFG 0x1008UL /* BIF Configuration Register */ 21 #define GREG_BIFDIAG 0x100CUL /* BIF Diagnostics Register */ 22 #define GREG_SWRST 0x1010UL /* Software Reset Register */ 23 24 /* Global SEB State Register */ 25 #define GREG_SEBSTATE_ARB 0x00000003 /* State of Arbiter */ 26 #define GREG_SEBSTATE_RXWON 0x00000004 /* RX won internal arbitration */ 27 28 /* Global Configuration Register */ 29 #define GREG_CFG_IBURST 0x00000001 /* Infinite Burst */ 30 #define GREG_CFG_TXDMALIM 0x0000003e /* TX DMA grant limit */ 31 #define GREG_CFG_RXDMALIM 0x000007c0 /* RX DMA grant limit */ 32 #define GREG_CFG_RONPAULBIT 0x00000800 /* Use mem read multiple for PCI read 33 * after infinite burst (Apple) */ 34 #define GREG_CFG_ENBUG2FIX 0x00001000 /* Fix Rx hang after overflow */ 35 36 /* Global Interrupt Status Register. 37 * 38 * Reading this register automatically clears bits 0 through 6. 39 * This auto-clearing does not occur when the alias at GREG_STAT2 40 * is read instead. The rest of the interrupt bits only clear when 41 * the secondary interrupt status register corresponding to that 42 * bit is read (ie. if GREG_STAT_PCS is set, it will be cleared by 43 * reading PCS_ISTAT). 44 */ 45 #define GREG_STAT_TXINTME 0x00000001 /* TX INTME frame transferred */ 46 #define GREG_STAT_TXALL 0x00000002 /* All TX frames transferred */ 47 #define GREG_STAT_TXDONE 0x00000004 /* One TX frame transferred */ 48 #define GREG_STAT_RXDONE 0x00000010 /* One RX frame arrived */ 49 #define GREG_STAT_RXNOBUF 0x00000020 /* No free RX buffers available */ 50 #define GREG_STAT_RXTAGERR 0x00000040 /* RX tag framing is corrupt */ 51 #define GREG_STAT_PCS 0x00002000 /* PCS signalled interrupt */ 52 #define GREG_STAT_TXMAC 0x00004000 /* TX MAC signalled interrupt */ 53 #define GREG_STAT_RXMAC 0x00008000 /* RX MAC signalled interrupt */ 54 #define GREG_STAT_MAC 0x00010000 /* MAC Control signalled irq */ 55 #define GREG_STAT_MIF 0x00020000 /* MIF signalled interrupt */ 56 #define GREG_STAT_PCIERR 0x00040000 /* PCI Error interrupt */ 57 #define GREG_STAT_TXNR 0xfff80000 /* == TXDMA_TXDONE reg val */ 58 #define GREG_STAT_TXNR_SHIFT 19 59 60 #define GREG_STAT_ABNORMAL (GREG_STAT_RXNOBUF | GREG_STAT_RXTAGERR | \ 61 GREG_STAT_PCS | GREG_STAT_TXMAC | GREG_STAT_RXMAC | \ 62 GREG_STAT_MAC | GREG_STAT_MIF | GREG_STAT_PCIERR) 63 64 #define GREG_STAT_NAPI (GREG_STAT_TXALL | GREG_STAT_TXINTME | \ 65 GREG_STAT_RXDONE | GREG_STAT_ABNORMAL) 66 67 /* The layout of GREG_IMASK and GREG_IACK is identical to GREG_STAT. 68 * Bits set in GREG_IMASK will prevent that interrupt type from being 69 * signalled to the cpu. GREG_IACK can be used to clear specific top-level 70 * interrupt conditions in GREG_STAT, ie. it only works for bits 0 through 6. 71 * Setting the bit will clear that interrupt, clear bits will have no effect 72 * on GREG_STAT. 73 */ 74 75 /* Global PCI Error Status Register */ 76 #define GREG_PCIESTAT_BADACK 0x00000001 /* No ACK64# during ABS64 cycle */ 77 #define GREG_PCIESTAT_DTRTO 0x00000002 /* Delayed transaction timeout */ 78 #define GREG_PCIESTAT_OTHER 0x00000004 /* Other PCI error, check cfg space */ 79 80 /* The layout of the GREG_PCIEMASK is identical to that of GREG_PCIESTAT. 81 * Bits set in GREG_PCIEMASK will prevent that interrupt type from being 82 * signalled to the cpu. 83 */ 84 85 /* Global BIF Configuration Register */ 86 #define GREG_BIFCFG_SLOWCLK 0x00000001 /* Set if PCI runs < 25Mhz */ 87 #define GREG_BIFCFG_B64DIS 0x00000002 /* Disable 64bit wide data cycle*/ 88 #define GREG_BIFCFG_M66EN 0x00000004 /* Set if on 66Mhz PCI segment */ 89 90 /* Global BIF Diagnostics Register */ 91 #define GREG_BIFDIAG_BURSTSM 0x007f0000 /* PCI Burst state machine */ 92 #define GREG_BIFDIAG_BIFSM 0xff000000 /* BIF state machine */ 93 94 /* Global Software Reset Register. 95 * 96 * This register is used to perform a global reset of the RX and TX portions 97 * of the GEM asic. Setting the RX or TX reset bit will start the reset. 98 * The driver _MUST_ poll these bits until they clear. One may not attempt 99 * to program any other part of GEM until the bits clear. 100 */ 101 #define GREG_SWRST_TXRST 0x00000001 /* TX Software Reset */ 102 #define GREG_SWRST_RXRST 0x00000002 /* RX Software Reset */ 103 #define GREG_SWRST_RSTOUT 0x00000004 /* Force RST# pin active */ 104 #define GREG_SWRST_CACHESIZE 0x00ff0000 /* RIO only: cache line size */ 105 #define GREG_SWRST_CACHE_SHIFT 16 106 107 /* TX DMA Registers */ 108 #define TXDMA_KICK 0x2000UL /* TX Kick Register */ 109 #define TXDMA_CFG 0x2004UL /* TX Configuration Register */ 110 #define TXDMA_DBLOW 0x2008UL /* TX Desc. Base Low */ 111 #define TXDMA_DBHI 0x200CUL /* TX Desc. Base High */ 112 #define TXDMA_FWPTR 0x2014UL /* TX FIFO Write Pointer */ 113 #define TXDMA_FSWPTR 0x2018UL /* TX FIFO Shadow Write Pointer */ 114 #define TXDMA_FRPTR 0x201CUL /* TX FIFO Read Pointer */ 115 #define TXDMA_FSRPTR 0x2020UL /* TX FIFO Shadow Read Pointer */ 116 #define TXDMA_PCNT 0x2024UL /* TX FIFO Packet Counter */ 117 #define TXDMA_SMACHINE 0x2028UL /* TX State Machine Register */ 118 #define TXDMA_DPLOW 0x2030UL /* TX Data Pointer Low */ 119 #define TXDMA_DPHI 0x2034UL /* TX Data Pointer High */ 120 #define TXDMA_TXDONE 0x2100UL /* TX Completion Register */ 121 #define TXDMA_FADDR 0x2104UL /* TX FIFO Address */ 122 #define TXDMA_FTAG 0x2108UL /* TX FIFO Tag */ 123 #define TXDMA_DLOW 0x210CUL /* TX FIFO Data Low */ 124 #define TXDMA_DHIT1 0x2110UL /* TX FIFO Data HighT1 */ 125 #define TXDMA_DHIT0 0x2114UL /* TX FIFO Data HighT0 */ 126 #define TXDMA_FSZ 0x2118UL /* TX FIFO Size */ 127 128 /* TX Kick Register. 129 * 130 * This 13-bit register is programmed by the driver to hold the descriptor 131 * entry index which follows the last valid transmit descriptor. 132 */ 133 134 /* TX Completion Register. 135 * 136 * This 13-bit register is updated by GEM to hold to descriptor entry index 137 * which follows the last descriptor already processed by GEM. Note that 138 * this value is mirrored in GREG_STAT which eliminates the need to even 139 * access this register in the driver during interrupt processing. 140 */ 141 142 /* TX Configuration Register. 143 * 144 * Note that TXDMA_CFG_FTHRESH, the TX FIFO Threshold, is an obsolete feature 145 * that was meant to be used with jumbo packets. It should be set to the 146 * maximum value of 0x4ff, else one risks getting TX MAC Underrun errors. 147 */ 148 #define TXDMA_CFG_ENABLE 0x00000001 /* Enable TX DMA channel */ 149 #define TXDMA_CFG_RINGSZ 0x0000001e /* TX descriptor ring size */ 150 #define TXDMA_CFG_RINGSZ_32 0x00000000 /* 32 TX descriptors */ 151 #define TXDMA_CFG_RINGSZ_64 0x00000002 /* 64 TX descriptors */ 152 #define TXDMA_CFG_RINGSZ_128 0x00000004 /* 128 TX descriptors */ 153 #define TXDMA_CFG_RINGSZ_256 0x00000006 /* 256 TX descriptors */ 154 #define TXDMA_CFG_RINGSZ_512 0x00000008 /* 512 TX descriptors */ 155 #define TXDMA_CFG_RINGSZ_1K 0x0000000a /* 1024 TX descriptors */ 156 #define TXDMA_CFG_RINGSZ_2K 0x0000000c /* 2048 TX descriptors */ 157 #define TXDMA_CFG_RINGSZ_4K 0x0000000e /* 4096 TX descriptors */ 158 #define TXDMA_CFG_RINGSZ_8K 0x00000010 /* 8192 TX descriptors */ 159 #define TXDMA_CFG_PIOSEL 0x00000020 /* Enable TX FIFO PIO from cpu */ 160 #define TXDMA_CFG_FTHRESH 0x001ffc00 /* TX FIFO Threshold, obsolete */ 161 #define TXDMA_CFG_PMODE 0x00200000 /* TXALL irq means TX FIFO empty*/ 162 163 /* TX Descriptor Base Low/High. 164 * 165 * These two registers store the 53 most significant bits of the base address 166 * of the TX descriptor table. The 11 least significant bits are always 167 * zero. As a result, the TX descriptor table must be 2K aligned. 168 */ 169 170 /* The rest of the TXDMA_* registers are for diagnostics and debug, I will document 171 * them later. -DaveM 172 */ 173 174 /* WakeOnLan Registers */ 175 #define WOL_MATCH0 0x3000UL 176 #define WOL_MATCH1 0x3004UL 177 #define WOL_MATCH2 0x3008UL 178 #define WOL_MCOUNT 0x300CUL 179 #define WOL_WAKECSR 0x3010UL 180 181 /* WOL Match count register 182 */ 183 #define WOL_MCOUNT_N 0x00000010 184 #define WOL_MCOUNT_M 0x00000000 /* 0 << 8 */ 185 186 #define WOL_WAKECSR_ENABLE 0x00000001 187 #define WOL_WAKECSR_MII 0x00000002 188 #define WOL_WAKECSR_SEEN 0x00000004 189 #define WOL_WAKECSR_FILT_UCAST 0x00000008 190 #define WOL_WAKECSR_FILT_MCAST 0x00000010 191 #define WOL_WAKECSR_FILT_BCAST 0x00000020 192 #define WOL_WAKECSR_FILT_SEEN 0x00000040 193 194 195 /* Receive DMA Registers */ 196 #define RXDMA_CFG 0x4000UL /* RX Configuration Register */ 197 #define RXDMA_DBLOW 0x4004UL /* RX Descriptor Base Low */ 198 #define RXDMA_DBHI 0x4008UL /* RX Descriptor Base High */ 199 #define RXDMA_FWPTR 0x400CUL /* RX FIFO Write Pointer */ 200 #define RXDMA_FSWPTR 0x4010UL /* RX FIFO Shadow Write Pointer */ 201 #define RXDMA_FRPTR 0x4014UL /* RX FIFO Read Pointer */ 202 #define RXDMA_PCNT 0x4018UL /* RX FIFO Packet Counter */ 203 #define RXDMA_SMACHINE 0x401CUL /* RX State Machine Register */ 204 #define RXDMA_PTHRESH 0x4020UL /* Pause Thresholds */ 205 #define RXDMA_DPLOW 0x4024UL /* RX Data Pointer Low */ 206 #define RXDMA_DPHI 0x4028UL /* RX Data Pointer High */ 207 #define RXDMA_KICK 0x4100UL /* RX Kick Register */ 208 #define RXDMA_DONE 0x4104UL /* RX Completion Register */ 209 #define RXDMA_BLANK 0x4108UL /* RX Blanking Register */ 210 #define RXDMA_FADDR 0x410CUL /* RX FIFO Address */ 211 #define RXDMA_FTAG 0x4110UL /* RX FIFO Tag */ 212 #define RXDMA_DLOW 0x4114UL /* RX FIFO Data Low */ 213 #define RXDMA_DHIT1 0x4118UL /* RX FIFO Data HighT0 */ 214 #define RXDMA_DHIT0 0x411CUL /* RX FIFO Data HighT1 */ 215 #define RXDMA_FSZ 0x4120UL /* RX FIFO Size */ 216 217 /* RX Configuration Register. */ 218 #define RXDMA_CFG_ENABLE 0x00000001 /* Enable RX DMA channel */ 219 #define RXDMA_CFG_RINGSZ 0x0000001e /* RX descriptor ring size */ 220 #define RXDMA_CFG_RINGSZ_32 0x00000000 /* - 32 entries */ 221 #define RXDMA_CFG_RINGSZ_64 0x00000002 /* - 64 entries */ 222 #define RXDMA_CFG_RINGSZ_128 0x00000004 /* - 128 entries */ 223 #define RXDMA_CFG_RINGSZ_256 0x00000006 /* - 256 entries */ 224 #define RXDMA_CFG_RINGSZ_512 0x00000008 /* - 512 entries */ 225 #define RXDMA_CFG_RINGSZ_1K 0x0000000a /* - 1024 entries */ 226 #define RXDMA_CFG_RINGSZ_2K 0x0000000c /* - 2048 entries */ 227 #define RXDMA_CFG_RINGSZ_4K 0x0000000e /* - 4096 entries */ 228 #define RXDMA_CFG_RINGSZ_8K 0x00000010 /* - 8192 entries */ 229 #define RXDMA_CFG_RINGSZ_BDISAB 0x00000020 /* Disable RX desc batching */ 230 #define RXDMA_CFG_FBOFF 0x00001c00 /* Offset of first data byte */ 231 #define RXDMA_CFG_CSUMOFF 0x000fe000 /* Skip bytes before csum calc */ 232 #define RXDMA_CFG_FTHRESH 0x07000000 /* RX FIFO dma start threshold */ 233 #define RXDMA_CFG_FTHRESH_64 0x00000000 /* - 64 bytes */ 234 #define RXDMA_CFG_FTHRESH_128 0x01000000 /* - 128 bytes */ 235 #define RXDMA_CFG_FTHRESH_256 0x02000000 /* - 256 bytes */ 236 #define RXDMA_CFG_FTHRESH_512 0x03000000 /* - 512 bytes */ 237 #define RXDMA_CFG_FTHRESH_1K 0x04000000 /* - 1024 bytes */ 238 #define RXDMA_CFG_FTHRESH_2K 0x05000000 /* - 2048 bytes */ 239 240 /* RX Descriptor Base Low/High. 241 * 242 * These two registers store the 53 most significant bits of the base address 243 * of the RX descriptor table. The 11 least significant bits are always 244 * zero. As a result, the RX descriptor table must be 2K aligned. 245 */ 246 247 /* RX PAUSE Thresholds. 248 * 249 * These values determine when XOFF and XON PAUSE frames are emitted by 250 * GEM. The thresholds measure RX FIFO occupancy in units of 64 bytes. 251 */ 252 #define RXDMA_PTHRESH_OFF 0x000001ff /* XOFF emitted w/FIFO > this */ 253 #define RXDMA_PTHRESH_ON 0x001ff000 /* XON emitted w/FIFO < this */ 254 255 /* RX Kick Register. 256 * 257 * This 13-bit register is written by the host CPU and holds the last 258 * valid RX descriptor number plus one. This is, if 'N' is written to 259 * this register, it means that all RX descriptors up to but excluding 260 * 'N' are valid. 261 * 262 * The hardware requires that RX descriptors are posted in increments 263 * of 4. This means 'N' must be a multiple of four. For the best 264 * performance, the first new descriptor being posted should be (PCI) 265 * cache line aligned. 266 */ 267 268 /* RX Completion Register. 269 * 270 * This 13-bit register is updated by GEM to indicate which RX descriptors 271 * have already been used for receive frames. All descriptors up to but 272 * excluding the value in this register are ready to be processed. GEM 273 * updates this register value after the RX FIFO empties completely into 274 * the RX descriptor's buffer, but before the RX_DONE bit is set in the 275 * interrupt status register. 276 */ 277 278 /* RX Blanking Register. */ 279 #define RXDMA_BLANK_IPKTS 0x000001ff /* RX_DONE asserted after this 280 * many packets received since 281 * previous RX_DONE. 282 */ 283 #define RXDMA_BLANK_ITIME 0x000ff000 /* RX_DONE asserted after this 284 * many clocks (measured in 2048 285 * PCI clocks) were counted since 286 * the previous RX_DONE. 287 */ 288 289 /* RX FIFO Size. 290 * 291 * This 11-bit read-only register indicates how large, in units of 64-bytes, 292 * the RX FIFO is. The driver uses this to properly configure the RX PAUSE 293 * thresholds. 294 */ 295 296 /* The rest of the RXDMA_* registers are for diagnostics and debug, I will document 297 * them later. -DaveM 298 */ 299 300 /* MAC Registers */ 301 #define MAC_TXRST 0x6000UL /* TX MAC Software Reset Command*/ 302 #define MAC_RXRST 0x6004UL /* RX MAC Software Reset Command*/ 303 #define MAC_SNDPAUSE 0x6008UL /* Send Pause Command Register */ 304 #define MAC_TXSTAT 0x6010UL /* TX MAC Status Register */ 305 #define MAC_RXSTAT 0x6014UL /* RX MAC Status Register */ 306 #define MAC_CSTAT 0x6018UL /* MAC Control Status Register */ 307 #define MAC_TXMASK 0x6020UL /* TX MAC Mask Register */ 308 #define MAC_RXMASK 0x6024UL /* RX MAC Mask Register */ 309 #define MAC_MCMASK 0x6028UL /* MAC Control Mask Register */ 310 #define MAC_TXCFG 0x6030UL /* TX MAC Configuration Register*/ 311 #define MAC_RXCFG 0x6034UL /* RX MAC Configuration Register*/ 312 #define MAC_MCCFG 0x6038UL /* MAC Control Config Register */ 313 #define MAC_XIFCFG 0x603CUL /* XIF Configuration Register */ 314 #define MAC_IPG0 0x6040UL /* InterPacketGap0 Register */ 315 #define MAC_IPG1 0x6044UL /* InterPacketGap1 Register */ 316 #define MAC_IPG2 0x6048UL /* InterPacketGap2 Register */ 317 #define MAC_STIME 0x604CUL /* SlotTime Register */ 318 #define MAC_MINFSZ 0x6050UL /* MinFrameSize Register */ 319 #define MAC_MAXFSZ 0x6054UL /* MaxFrameSize Register */ 320 #define MAC_PASIZE 0x6058UL /* PA Size Register */ 321 #define MAC_JAMSIZE 0x605CUL /* JamSize Register */ 322 #define MAC_ATTLIM 0x6060UL /* Attempt Limit Register */ 323 #define MAC_MCTYPE 0x6064UL /* MAC Control Type Register */ 324 #define MAC_ADDR0 0x6080UL /* MAC Address 0 Register */ 325 #define MAC_ADDR1 0x6084UL /* MAC Address 1 Register */ 326 #define MAC_ADDR2 0x6088UL /* MAC Address 2 Register */ 327 #define MAC_ADDR3 0x608CUL /* MAC Address 3 Register */ 328 #define MAC_ADDR4 0x6090UL /* MAC Address 4 Register */ 329 #define MAC_ADDR5 0x6094UL /* MAC Address 5 Register */ 330 #define MAC_ADDR6 0x6098UL /* MAC Address 6 Register */ 331 #define MAC_ADDR7 0x609CUL /* MAC Address 7 Register */ 332 #define MAC_ADDR8 0x60A0UL /* MAC Address 8 Register */ 333 #define MAC_AFILT0 0x60A4UL /* Address Filter 0 Register */ 334 #define MAC_AFILT1 0x60A8UL /* Address Filter 1 Register */ 335 #define MAC_AFILT2 0x60ACUL /* Address Filter 2 Register */ 336 #define MAC_AF21MSK 0x60B0UL /* Address Filter 2&1 Mask Reg */ 337 #define MAC_AF0MSK 0x60B4UL /* Address Filter 0 Mask Reg */ 338 #define MAC_HASH0 0x60C0UL /* Hash Table 0 Register */ 339 #define MAC_HASH1 0x60C4UL /* Hash Table 1 Register */ 340 #define MAC_HASH2 0x60C8UL /* Hash Table 2 Register */ 341 #define MAC_HASH3 0x60CCUL /* Hash Table 3 Register */ 342 #define MAC_HASH4 0x60D0UL /* Hash Table 4 Register */ 343 #define MAC_HASH5 0x60D4UL /* Hash Table 5 Register */ 344 #define MAC_HASH6 0x60D8UL /* Hash Table 6 Register */ 345 #define MAC_HASH7 0x60DCUL /* Hash Table 7 Register */ 346 #define MAC_HASH8 0x60E0UL /* Hash Table 8 Register */ 347 #define MAC_HASH9 0x60E4UL /* Hash Table 9 Register */ 348 #define MAC_HASH10 0x60E8UL /* Hash Table 10 Register */ 349 #define MAC_HASH11 0x60ECUL /* Hash Table 11 Register */ 350 #define MAC_HASH12 0x60F0UL /* Hash Table 12 Register */ 351 #define MAC_HASH13 0x60F4UL /* Hash Table 13 Register */ 352 #define MAC_HASH14 0x60F8UL /* Hash Table 14 Register */ 353 #define MAC_HASH15 0x60FCUL /* Hash Table 15 Register */ 354 #define MAC_NCOLL 0x6100UL /* Normal Collision Counter */ 355 #define MAC_FASUCC 0x6104UL /* First Attmpt. Succ Coll Ctr. */ 356 #define MAC_ECOLL 0x6108UL /* Excessive Collision Counter */ 357 #define MAC_LCOLL 0x610CUL /* Late Collision Counter */ 358 #define MAC_DTIMER 0x6110UL /* Defer Timer */ 359 #define MAC_PATMPS 0x6114UL /* Peak Attempts Register */ 360 #define MAC_RFCTR 0x6118UL /* Receive Frame Counter */ 361 #define MAC_LERR 0x611CUL /* Length Error Counter */ 362 #define MAC_AERR 0x6120UL /* Alignment Error Counter */ 363 #define MAC_FCSERR 0x6124UL /* FCS Error Counter */ 364 #define MAC_RXCVERR 0x6128UL /* RX code Violation Error Ctr */ 365 #define MAC_RANDSEED 0x6130UL /* Random Number Seed Register */ 366 #define MAC_SMACHINE 0x6134UL /* State Machine Register */ 367 368 /* TX MAC Software Reset Command. */ 369 #define MAC_TXRST_CMD 0x00000001 /* Start sw reset, self-clears */ 370 371 /* RX MAC Software Reset Command. */ 372 #define MAC_RXRST_CMD 0x00000001 /* Start sw reset, self-clears */ 373 374 /* Send Pause Command. */ 375 #define MAC_SNDPAUSE_TS 0x0000ffff /* The pause_time operand used in 376 * Send_Pause and flow-control 377 * handshakes. 378 */ 379 #define MAC_SNDPAUSE_SP 0x00010000 /* Setting this bit instructs the MAC 380 * to send a Pause Flow Control 381 * frame onto the network. 382 */ 383 384 /* TX MAC Status Register. */ 385 #define MAC_TXSTAT_XMIT 0x00000001 /* Frame Transmitted */ 386 #define MAC_TXSTAT_URUN 0x00000002 /* TX Underrun */ 387 #define MAC_TXSTAT_MPE 0x00000004 /* Max Packet Size Error */ 388 #define MAC_TXSTAT_NCE 0x00000008 /* Normal Collision Cntr Expire */ 389 #define MAC_TXSTAT_ECE 0x00000010 /* Excess Collision Cntr Expire */ 390 #define MAC_TXSTAT_LCE 0x00000020 /* Late Collision Cntr Expire */ 391 #define MAC_TXSTAT_FCE 0x00000040 /* First Collision Cntr Expire */ 392 #define MAC_TXSTAT_DTE 0x00000080 /* Defer Timer Expire */ 393 #define MAC_TXSTAT_PCE 0x00000100 /* Peak Attempts Cntr Expire */ 394 395 /* RX MAC Status Register. */ 396 #define MAC_RXSTAT_RCV 0x00000001 /* Frame Received */ 397 #define MAC_RXSTAT_OFLW 0x00000002 /* Receive Overflow */ 398 #define MAC_RXSTAT_FCE 0x00000004 /* Frame Cntr Expire */ 399 #define MAC_RXSTAT_ACE 0x00000008 /* Align Error Cntr Expire */ 400 #define MAC_RXSTAT_CCE 0x00000010 /* CRC Error Cntr Expire */ 401 #define MAC_RXSTAT_LCE 0x00000020 /* Length Error Cntr Expire */ 402 #define MAC_RXSTAT_VCE 0x00000040 /* Code Violation Cntr Expire */ 403 404 /* MAC Control Status Register. */ 405 #define MAC_CSTAT_PRCV 0x00000001 /* Pause Received */ 406 #define MAC_CSTAT_PS 0x00000002 /* Paused State */ 407 #define MAC_CSTAT_NPS 0x00000004 /* Not Paused State */ 408 #define MAC_CSTAT_PTR 0xffff0000 /* Pause Time Received */ 409 410 /* The layout of the MAC_{TX,RX,C}MASK registers is identical to that 411 * of MAC_{TX,RX,C}STAT. Bits set in MAC_{TX,RX,C}MASK will prevent 412 * that interrupt type from being signalled to front end of GEM. For 413 * the interrupt to actually get sent to the cpu, it is necessary to 414 * properly set the appropriate GREG_IMASK_{TX,RX,}MAC bits as well. 415 */ 416 417 /* TX MAC Configuration Register. 418 * 419 * NOTE: The TX MAC Enable bit must be cleared and polled until 420 * zero before any other bits in this register are changed. 421 * 422 * Also, enabling the Carrier Extension feature of GEM is 423 * a 3 step process 1) Set TX Carrier Extension 2) Set 424 * RX Carrier Extension 3) Set Slot Time to 0x200. This 425 * mode must be enabled when in half-duplex at 1Gbps, else 426 * it must be disabled. 427 */ 428 #define MAC_TXCFG_ENAB 0x00000001 /* TX MAC Enable */ 429 #define MAC_TXCFG_ICS 0x00000002 /* Ignore Carrier Sense */ 430 #define MAC_TXCFG_ICOLL 0x00000004 /* Ignore Collisions */ 431 #define MAC_TXCFG_EIPG0 0x00000008 /* Enable IPG0 */ 432 #define MAC_TXCFG_NGU 0x00000010 /* Never Give Up */ 433 #define MAC_TXCFG_NGUL 0x00000020 /* Never Give Up Limit */ 434 #define MAC_TXCFG_NBO 0x00000040 /* No Backoff */ 435 #define MAC_TXCFG_SD 0x00000080 /* Slow Down */ 436 #define MAC_TXCFG_NFCS 0x00000100 /* No FCS */ 437 #define MAC_TXCFG_TCE 0x00000200 /* TX Carrier Extension */ 438 439 /* RX MAC Configuration Register. 440 * 441 * NOTE: The RX MAC Enable bit must be cleared and polled until 442 * zero before any other bits in this register are changed. 443 * 444 * Similar rules apply to the Hash Filter Enable bit when 445 * programming the hash table registers, and the Address Filter 446 * Enable bit when programming the address filter registers. 447 */ 448 #define MAC_RXCFG_ENAB 0x00000001 /* RX MAC Enable */ 449 #define MAC_RXCFG_SPAD 0x00000002 /* Strip Pad */ 450 #define MAC_RXCFG_SFCS 0x00000004 /* Strip FCS */ 451 #define MAC_RXCFG_PROM 0x00000008 /* Promiscuous Mode */ 452 #define MAC_RXCFG_PGRP 0x00000010 /* Promiscuous Group */ 453 #define MAC_RXCFG_HFE 0x00000020 /* Hash Filter Enable */ 454 #define MAC_RXCFG_AFE 0x00000040 /* Address Filter Enable */ 455 #define MAC_RXCFG_DDE 0x00000080 /* Disable Discard on Error */ 456 #define MAC_RXCFG_RCE 0x00000100 /* RX Carrier Extension */ 457 458 /* MAC Control Config Register. */ 459 #define MAC_MCCFG_SPE 0x00000001 /* Send Pause Enable */ 460 #define MAC_MCCFG_RPE 0x00000002 /* Receive Pause Enable */ 461 #define MAC_MCCFG_PMC 0x00000004 /* Pass MAC Control */ 462 463 /* XIF Configuration Register. 464 * 465 * NOTE: When leaving or entering loopback mode, a global hardware 466 * init of GEM should be performed. 467 */ 468 #define MAC_XIFCFG_OE 0x00000001 /* MII TX Output Driver Enable */ 469 #define MAC_XIFCFG_LBCK 0x00000002 /* Loopback TX to RX */ 470 #define MAC_XIFCFG_DISE 0x00000004 /* Disable RX path during TX */ 471 #define MAC_XIFCFG_GMII 0x00000008 /* Use GMII clocks + datapath */ 472 #define MAC_XIFCFG_MBOE 0x00000010 /* Controls MII_BUF_EN pin */ 473 #define MAC_XIFCFG_LLED 0x00000020 /* Force LINKLED# active (low) */ 474 #define MAC_XIFCFG_FLED 0x00000040 /* Force FDPLXLED# active (low) */ 475 476 /* InterPacketGap0 Register. This 8-bit value is used as an extension 477 * to the InterPacketGap1 Register. Specifically it contributes to the 478 * timing of the RX-to-TX IPG. This value is ignored and presumed to 479 * be zero for TX-to-TX IPG calculations and/or when the Enable IPG0 bit 480 * is cleared in the TX MAC Configuration Register. 481 * 482 * This value in this register in terms of media byte time. 483 * 484 * Recommended value: 0x00 485 */ 486 487 /* InterPacketGap1 Register. This 8-bit value defines the first 2/3 488 * portion of the Inter Packet Gap. 489 * 490 * This value in this register in terms of media byte time. 491 * 492 * Recommended value: 0x08 493 */ 494 495 /* InterPacketGap2 Register. This 8-bit value defines the second 1/3 496 * portion of the Inter Packet Gap. 497 * 498 * This value in this register in terms of media byte time. 499 * 500 * Recommended value: 0x04 501 */ 502 503 /* Slot Time Register. This 10-bit value specifies the slot time 504 * parameter in units of media byte time. It determines the physical 505 * span of the network. 506 * 507 * Recommended value: 0x40 508 */ 509 510 /* Minimum Frame Size Register. This 10-bit register specifies the 511 * smallest sized frame the TXMAC will send onto the medium, and the 512 * RXMAC will receive from the medium. 513 * 514 * Recommended value: 0x40 515 */ 516 517 /* Maximum Frame and Burst Size Register. 518 * 519 * This register specifies two things. First it specifies the maximum 520 * sized frame the TXMAC will send and the RXMAC will recognize as 521 * valid. Second, it specifies the maximum run length of a burst of 522 * packets sent in half-duplex gigabit modes. 523 * 524 * Recommended value: 0x200005ee 525 */ 526 #define MAC_MAXFSZ_MFS 0x00007fff /* Max Frame Size */ 527 #define MAC_MAXFSZ_MBS 0x7fff0000 /* Max Burst Size */ 528 529 /* PA Size Register. This 10-bit register specifies the number of preamble 530 * bytes which will be transmitted at the beginning of each frame. A 531 * value of two or greater should be programmed here. 532 * 533 * Recommended value: 0x07 534 */ 535 536 /* Jam Size Register. This 4-bit register specifies the duration of 537 * the jam in units of media byte time. 538 * 539 * Recommended value: 0x04 540 */ 541 542 /* Attempts Limit Register. This 8-bit register specifies the number 543 * of attempts that the TXMAC will make to transmit a frame, before it 544 * resets its Attempts Counter. After reaching the Attempts Limit the 545 * TXMAC may or may not drop the frame, as determined by the NGU 546 * (Never Give Up) and NGUL (Never Give Up Limit) bits in the TXMAC 547 * Configuration Register. 548 * 549 * Recommended value: 0x10 550 */ 551 552 /* MAX Control Type Register. This 16-bit register specifies the 553 * "type" field of a MAC Control frame. The TXMAC uses this field to 554 * encapsulate the MAC Control frame for transmission, and the RXMAC 555 * uses it for decoding valid MAC Control frames received from the 556 * network. 557 * 558 * Recommended value: 0x8808 559 */ 560 561 /* MAC Address Registers. Each of these registers specify the 562 * ethernet MAC of the interface, 16-bits at a time. Register 563 * 0 specifies bits [47:32], register 1 bits [31:16], and register 564 * 2 bits [15:0]. 565 * 566 * Registers 3 through and including 5 specify an alternate 567 * MAC address for the interface. 568 * 569 * Registers 6 through and including 8 specify the MAC Control 570 * Address, which must be the reserved multicast address for MAC 571 * Control frames. 572 * 573 * Example: To program primary station address a:b:c:d:e:f into 574 * the chip. 575 * MAC_Address_2 = (a << 8) | b 576 * MAC_Address_1 = (c << 8) | d 577 * MAC_Address_0 = (e << 8) | f 578 */ 579 580 /* Address Filter Registers. Registers 0 through 2 specify bit 581 * fields [47:32] through [15:0], respectively, of the address 582 * filter. The Address Filter 2&1 Mask Register denotes the 8-bit 583 * nibble mask for Address Filter Registers 2 and 1. The Address 584 * Filter 0 Mask Register denotes the 16-bit mask for the Address 585 * Filter Register 0. 586 */ 587 588 /* Hash Table Registers. Registers 0 through 15 specify bit fields 589 * [255:240] through [15:0], respectively, of the hash table. 590 */ 591 592 /* Statistics Registers. All of these registers are 16-bits and 593 * track occurrences of a specific event. GEM can be configured 594 * to interrupt the host cpu when any of these counters overflow. 595 * They should all be explicitly initialized to zero when the interface 596 * is brought up. 597 */ 598 599 /* Random Number Seed Register. This 10-bit value is used as the 600 * RNG seed inside GEM for the CSMA/CD backoff algorithm. It is 601 * recommended to program this register to the 10 LSB of the 602 * interfaces MAC address. 603 */ 604 605 /* Pause Timer, read-only. This 16-bit timer is used to time the pause 606 * interval as indicated by a received pause flow control frame. 607 * A non-zero value in this timer indicates that the MAC is currently in 608 * the paused state. 609 */ 610 611 /* MIF Registers */ 612 #define MIF_BBCLK 0x6200UL /* MIF Bit-Bang Clock */ 613 #define MIF_BBDATA 0x6204UL /* MIF Bit-Band Data */ 614 #define MIF_BBOENAB 0x6208UL /* MIF Bit-Bang Output Enable */ 615 #define MIF_FRAME 0x620CUL /* MIF Frame/Output Register */ 616 #define MIF_CFG 0x6210UL /* MIF Configuration Register */ 617 #define MIF_MASK 0x6214UL /* MIF Mask Register */ 618 #define MIF_STATUS 0x6218UL /* MIF Status Register */ 619 #define MIF_SMACHINE 0x621CUL /* MIF State Machine Register */ 620 621 /* MIF Bit-Bang Clock. This 1-bit register is used to generate the 622 * MDC clock waveform on the MII Management Interface when the MIF is 623 * programmed in the "Bit-Bang" mode. Writing a '1' after a '0' into 624 * this register will create a rising edge on the MDC, while writing 625 * a '0' after a '1' will create a falling edge. For every bit that 626 * is transferred on the management interface, both edges have to be 627 * generated. 628 */ 629 630 /* MIF Bit-Bang Data. This 1-bit register is used to generate the 631 * outgoing data (MDO) on the MII Management Interface when the MIF 632 * is programmed in the "Bit-Bang" mode. The daa will be steered to the 633 * appropriate MDIO based on the state of the PHY_Select bit in the MIF 634 * Configuration Register. 635 */ 636 637 /* MIF Big-Band Output Enable. THis 1-bit register is used to enable 638 * ('1') or disable ('0') the I-directional driver on the MII when the 639 * MIF is programmed in the "Bit-Bang" mode. The MDIO should be enabled 640 * when data bits are transferred from the MIF to the transceiver, and it 641 * should be disabled when the interface is idle or when data bits are 642 * transferred from the transceiver to the MIF (data portion of a read 643 * instruction). Only one MDIO will be enabled at a given time, depending 644 * on the state of the PHY_Select bit in the MIF Configuration Register. 645 */ 646 647 /* MIF Configuration Register. This 15-bit register controls the operation 648 * of the MIF. 649 */ 650 #define MIF_CFG_PSELECT 0x00000001 /* Xcvr slct: 0=mdio0 1=mdio1 */ 651 #define MIF_CFG_POLL 0x00000002 /* Enable polling mechanism */ 652 #define MIF_CFG_BBMODE 0x00000004 /* 1=bit-bang 0=frame mode */ 653 #define MIF_CFG_PRADDR 0x000000f8 /* Xcvr poll register address */ 654 #define MIF_CFG_MDI0 0x00000100 /* MDIO_0 present or read-bit */ 655 #define MIF_CFG_MDI1 0x00000200 /* MDIO_1 present or read-bit */ 656 #define MIF_CFG_PPADDR 0x00007c00 /* Xcvr poll PHY address */ 657 658 /* MIF Frame/Output Register. This 32-bit register allows the host to 659 * communicate with a transceiver in frame mode (as opposed to big-bang 660 * mode). Writes by the host specify an instrution. After being issued 661 * the host must poll this register for completion. Also, after 662 * completion this register holds the data returned by the transceiver 663 * if applicable. 664 */ 665 #define MIF_FRAME_ST 0xc0000000 /* STart of frame */ 666 #define MIF_FRAME_OP 0x30000000 /* OPcode */ 667 #define MIF_FRAME_PHYAD 0x0f800000 /* PHY ADdress */ 668 #define MIF_FRAME_REGAD 0x007c0000 /* REGister ADdress */ 669 #define MIF_FRAME_TAMSB 0x00020000 /* Turn Around MSB */ 670 #define MIF_FRAME_TALSB 0x00010000 /* Turn Around LSB */ 671 #define MIF_FRAME_DATA 0x0000ffff /* Instruction Payload */ 672 673 /* MIF Status Register. This register reports status when the MIF is 674 * operating in the poll mode. The poll status field is auto-clearing 675 * on read. 676 */ 677 #define MIF_STATUS_DATA 0xffff0000 /* Live image of XCVR reg */ 678 #define MIF_STATUS_STAT 0x0000ffff /* Which bits have changed */ 679 680 /* MIF Mask Register. This 16-bit register is used when in poll mode 681 * to say which bits of the polled register will cause an interrupt 682 * when changed. 683 */ 684 685 /* PCS/Serialink Registers */ 686 #define PCS_MIICTRL 0x9000UL /* PCS MII Control Register */ 687 #define PCS_MIISTAT 0x9004UL /* PCS MII Status Register */ 688 #define PCS_MIIADV 0x9008UL /* PCS MII Advertisement Reg */ 689 #define PCS_MIILP 0x900CUL /* PCS MII Link Partner Ability */ 690 #define PCS_CFG 0x9010UL /* PCS Configuration Register */ 691 #define PCS_SMACHINE 0x9014UL /* PCS State Machine Register */ 692 #define PCS_ISTAT 0x9018UL /* PCS Interrupt Status Reg */ 693 #define PCS_DMODE 0x9050UL /* Datapath Mode Register */ 694 #define PCS_SCTRL 0x9054UL /* Serialink Control Register */ 695 #define PCS_SOS 0x9058UL /* Shared Output Select Reg */ 696 #define PCS_SSTATE 0x905CUL /* Serialink State Register */ 697 698 /* PCD MII Control Register. */ 699 #define PCS_MIICTRL_SPD 0x00000040 /* Read as one, writes ignored */ 700 #define PCS_MIICTRL_CT 0x00000080 /* Force COL signal active */ 701 #define PCS_MIICTRL_DM 0x00000100 /* Duplex mode, forced low */ 702 #define PCS_MIICTRL_RAN 0x00000200 /* Restart auto-neg, self clear */ 703 #define PCS_MIICTRL_ISO 0x00000400 /* Read as zero, writes ignored */ 704 #define PCS_MIICTRL_PD 0x00000800 /* Read as zero, writes ignored */ 705 #define PCS_MIICTRL_ANE 0x00001000 /* Auto-neg enable */ 706 #define PCS_MIICTRL_SS 0x00002000 /* Read as zero, writes ignored */ 707 #define PCS_MIICTRL_WB 0x00004000 /* Wrapback, loopback at 10-bit 708 * input side of Serialink 709 */ 710 #define PCS_MIICTRL_RST 0x00008000 /* Resets PCS, self clearing */ 711 712 /* PCS MII Status Register. */ 713 #define PCS_MIISTAT_EC 0x00000001 /* Ext Capability: Read as zero */ 714 #define PCS_MIISTAT_JD 0x00000002 /* Jabber Detect: Read as zero */ 715 #define PCS_MIISTAT_LS 0x00000004 /* Link Status: 1=up 0=down */ 716 #define PCS_MIISTAT_ANA 0x00000008 /* Auto-neg Ability, always 1 */ 717 #define PCS_MIISTAT_RF 0x00000010 /* Remote Fault */ 718 #define PCS_MIISTAT_ANC 0x00000020 /* Auto-neg complete */ 719 #define PCS_MIISTAT_ES 0x00000100 /* Extended Status, always 1 */ 720 721 /* PCS MII Advertisement Register. */ 722 #define PCS_MIIADV_FD 0x00000020 /* Advertise Full Duplex */ 723 #define PCS_MIIADV_HD 0x00000040 /* Advertise Half Duplex */ 724 #define PCS_MIIADV_SP 0x00000080 /* Advertise Symmetric Pause */ 725 #define PCS_MIIADV_AP 0x00000100 /* Advertise Asymmetric Pause */ 726 #define PCS_MIIADV_RF 0x00003000 /* Remote Fault */ 727 #define PCS_MIIADV_ACK 0x00004000 /* Read-only */ 728 #define PCS_MIIADV_NP 0x00008000 /* Next-page, forced low */ 729 730 /* PCS MII Link Partner Ability Register. This register is equivalent 731 * to the Link Partnet Ability Register of the standard MII register set. 732 * It's layout corresponds to the PCS MII Advertisement Register. 733 */ 734 735 /* PCS Configuration Register. */ 736 #define PCS_CFG_ENABLE 0x00000001 /* Must be zero while changing 737 * PCS MII advertisement reg. 738 */ 739 #define PCS_CFG_SDO 0x00000002 /* Signal detect override */ 740 #define PCS_CFG_SDL 0x00000004 /* Signal detect active low */ 741 #define PCS_CFG_JS 0x00000018 /* Jitter-study: 742 * 0 = normal operation 743 * 1 = high-frequency test pattern 744 * 2 = low-frequency test pattern 745 * 3 = reserved 746 */ 747 #define PCS_CFG_TO 0x00000020 /* 10ms auto-neg timer override */ 748 749 /* PCS Interrupt Status Register. This register is self-clearing 750 * when read. 751 */ 752 #define PCS_ISTAT_LSC 0x00000004 /* Link Status Change */ 753 754 /* Datapath Mode Register. */ 755 #define PCS_DMODE_SM 0x00000001 /* 1 = use internal Serialink */ 756 #define PCS_DMODE_ESM 0x00000002 /* External SERDES mode */ 757 #define PCS_DMODE_MGM 0x00000004 /* MII/GMII mode */ 758 #define PCS_DMODE_GMOE 0x00000008 /* GMII Output Enable */ 759 760 /* Serialink Control Register. 761 * 762 * NOTE: When in SERDES mode, the loopback bit has inverse logic. 763 */ 764 #define PCS_SCTRL_LOOP 0x00000001 /* Loopback enable */ 765 #define PCS_SCTRL_ESCD 0x00000002 /* Enable sync char detection */ 766 #define PCS_SCTRL_LOCK 0x00000004 /* Lock to reference clock */ 767 #define PCS_SCTRL_EMP 0x00000018 /* Output driver emphasis */ 768 #define PCS_SCTRL_STEST 0x000001c0 /* Self test patterns */ 769 #define PCS_SCTRL_PDWN 0x00000200 /* Software power-down */ 770 #define PCS_SCTRL_RXZ 0x00000c00 /* PLL input to Serialink */ 771 #define PCS_SCTRL_RXP 0x00003000 /* PLL input to Serialink */ 772 #define PCS_SCTRL_TXZ 0x0000c000 /* PLL input to Serialink */ 773 #define PCS_SCTRL_TXP 0x00030000 /* PLL input to Serialink */ 774 775 /* Shared Output Select Register. For test and debug, allows multiplexing 776 * test outputs into the PROM address pins. Set to zero for normal 777 * operation. 778 */ 779 #define PCS_SOS_PADDR 0x00000003 /* PROM Address */ 780 781 /* PROM Image Space */ 782 #define PROM_START 0x100000UL /* Expansion ROM run time access*/ 783 #define PROM_SIZE 0x0fffffUL /* Size of ROM */ 784 #define PROM_END 0x200000UL /* End of ROM */ 785 786 /* MII definitions missing from mii.h */ 787 788 #define BMCR_SPD2 0x0040 /* Gigabit enable? (bcm5411) */ 789 #define LPA_PAUSE 0x0400 790 791 /* More PHY registers (specific to Broadcom models) */ 792 793 /* MII BCM5201 MULTIPHY interrupt register */ 794 #define MII_BCM5201_INTERRUPT 0x1A 795 #define MII_BCM5201_INTERRUPT_INTENABLE 0x4000 796 797 #define MII_BCM5201_AUXMODE2 0x1B 798 #define MII_BCM5201_AUXMODE2_LOWPOWER 0x0008 799 800 #define MII_BCM5201_MULTIPHY 0x1E 801 802 /* MII BCM5201 MULTIPHY register bits */ 803 #define MII_BCM5201_MULTIPHY_SERIALMODE 0x0002 804 #define MII_BCM5201_MULTIPHY_SUPERISOLATE 0x0008 805 806 /* MII BCM5400 1000-BASET Control register */ 807 #define MII_BCM5400_GB_CONTROL 0x09 808 #define MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP 0x0200 809 810 /* MII BCM5400 AUXCONTROL register */ 811 #define MII_BCM5400_AUXCONTROL 0x18 812 #define MII_BCM5400_AUXCONTROL_PWR10BASET 0x0004 813 814 /* MII BCM5400 AUXSTATUS register */ 815 #define MII_BCM5400_AUXSTATUS 0x19 816 #define MII_BCM5400_AUXSTATUS_LINKMODE_MASK 0x0700 817 #define MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT 8 818 819 /* When it can, GEM internally caches 4 aligned TX descriptors 820 * at a time, so that it can use full cacheline DMA reads. 821 * 822 * Note that unlike HME, there is no ownership bit in the descriptor 823 * control word. The same functionality is obtained via the TX-Kick 824 * and TX-Complete registers. As a result, GEM need not write back 825 * updated values to the TX descriptor ring, it only performs reads. 826 * 827 * Since TX descriptors are never modified by GEM, the driver can 828 * use the buffer DMA address as a place to keep track of allocated 829 * DMA mappings for a transmitted packet. 830 */ 831 struct gem_txd { 832 __le64 control_word; 833 __le64 buffer; 834 }; 835 836 #define TXDCTRL_BUFSZ 0x0000000000007fffULL /* Buffer Size */ 837 #define TXDCTRL_CSTART 0x00000000001f8000ULL /* CSUM Start Offset */ 838 #define TXDCTRL_COFF 0x000000001fe00000ULL /* CSUM Stuff Offset */ 839 #define TXDCTRL_CENAB 0x0000000020000000ULL /* CSUM Enable */ 840 #define TXDCTRL_EOF 0x0000000040000000ULL /* End of Frame */ 841 #define TXDCTRL_SOF 0x0000000080000000ULL /* Start of Frame */ 842 #define TXDCTRL_INTME 0x0000000100000000ULL /* "Interrupt Me" */ 843 #define TXDCTRL_NOCRC 0x0000000200000000ULL /* No CRC Present */ 844 845 /* GEM requires that RX descriptors are provided four at a time, 846 * aligned. Also, the RX ring may not wrap around. This means that 847 * there will be at least 4 unused descriptor entries in the middle 848 * of the RX ring at all times. 849 * 850 * Similar to HME, GEM assumes that it can write garbage bytes before 851 * the beginning of the buffer and right after the end in order to DMA 852 * whole cachelines. 853 * 854 * Unlike for TX, GEM does update the status word in the RX descriptors 855 * when packets arrive. Therefore an ownership bit does exist in the 856 * RX descriptors. It is advisory, GEM clears it but does not check 857 * it in any way. So when buffers are posted to the RX ring (via the 858 * RX Kick register) by the driver it must make sure the buffers are 859 * truly ready and that the ownership bits are set properly. 860 * 861 * Even though GEM modifies the RX descriptors, it guarantees that the 862 * buffer DMA address field will stay the same when it performs these 863 * updates. Therefore it can be used to keep track of DMA mappings 864 * by the host driver just as in the TX descriptor case above. 865 */ 866 struct gem_rxd { 867 __le64 status_word; 868 __le64 buffer; 869 }; 870 871 #define RXDCTRL_TCPCSUM 0x000000000000ffffULL /* TCP Pseudo-CSUM */ 872 #define RXDCTRL_BUFSZ 0x000000007fff0000ULL /* Buffer Size */ 873 #define RXDCTRL_OWN 0x0000000080000000ULL /* GEM owns this entry */ 874 #define RXDCTRL_HASHVAL 0x0ffff00000000000ULL /* Hash Value */ 875 #define RXDCTRL_HPASS 0x1000000000000000ULL /* Passed Hash Filter */ 876 #define RXDCTRL_ALTMAC 0x2000000000000000ULL /* Matched ALT MAC */ 877 #define RXDCTRL_BAD 0x4000000000000000ULL /* Frame has bad CRC */ 878 879 #define RXDCTRL_FRESH(gp) \ 880 ((((RX_BUF_ALLOC_SIZE(gp) - RX_OFFSET) << 16) & RXDCTRL_BUFSZ) | \ 881 RXDCTRL_OWN) 882 883 #define TX_RING_SIZE 128 884 #define RX_RING_SIZE 128 885 886 #if TX_RING_SIZE == 32 887 #define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_32 888 #elif TX_RING_SIZE == 64 889 #define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_64 890 #elif TX_RING_SIZE == 128 891 #define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_128 892 #elif TX_RING_SIZE == 256 893 #define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_256 894 #elif TX_RING_SIZE == 512 895 #define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_512 896 #elif TX_RING_SIZE == 1024 897 #define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_1K 898 #elif TX_RING_SIZE == 2048 899 #define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_2K 900 #elif TX_RING_SIZE == 4096 901 #define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_4K 902 #elif TX_RING_SIZE == 8192 903 #define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_8K 904 #else 905 #error TX_RING_SIZE value is illegal... 906 #endif 907 908 #if RX_RING_SIZE == 32 909 #define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_32 910 #elif RX_RING_SIZE == 64 911 #define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_64 912 #elif RX_RING_SIZE == 128 913 #define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_128 914 #elif RX_RING_SIZE == 256 915 #define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_256 916 #elif RX_RING_SIZE == 512 917 #define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_512 918 #elif RX_RING_SIZE == 1024 919 #define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_1K 920 #elif RX_RING_SIZE == 2048 921 #define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_2K 922 #elif RX_RING_SIZE == 4096 923 #define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_4K 924 #elif RX_RING_SIZE == 8192 925 #define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_8K 926 #else 927 #error RX_RING_SIZE is illegal... 928 #endif 929 930 #define NEXT_TX(N) (((N) + 1) & (TX_RING_SIZE - 1)) 931 #define NEXT_RX(N) (((N) + 1) & (RX_RING_SIZE - 1)) 932 933 #define TX_BUFFS_AVAIL(GP) \ 934 (((GP)->tx_old <= (GP)->tx_new) ? \ 935 (GP)->tx_old + (TX_RING_SIZE - 1) - (GP)->tx_new : \ 936 (GP)->tx_old - (GP)->tx_new - 1) 937 938 #define RX_OFFSET 2 939 #define RX_BUF_ALLOC_SIZE(gp) ((gp)->rx_buf_sz + 28 + RX_OFFSET + 64) 940 941 #define RX_COPY_THRESHOLD 256 942 943 #if TX_RING_SIZE < 128 944 #define INIT_BLOCK_TX_RING_SIZE 128 945 #else 946 #define INIT_BLOCK_TX_RING_SIZE TX_RING_SIZE 947 #endif 948 949 #if RX_RING_SIZE < 128 950 #define INIT_BLOCK_RX_RING_SIZE 128 951 #else 952 #define INIT_BLOCK_RX_RING_SIZE RX_RING_SIZE 953 #endif 954 955 struct gem_init_block { 956 struct gem_txd txd[INIT_BLOCK_TX_RING_SIZE]; 957 struct gem_rxd rxd[INIT_BLOCK_RX_RING_SIZE]; 958 }; 959 960 enum gem_phy_type { 961 phy_mii_mdio0, 962 phy_mii_mdio1, 963 phy_serialink, 964 phy_serdes, 965 }; 966 967 enum link_state { 968 link_down = 0, /* No link, will retry */ 969 link_aneg, /* Autoneg in progress */ 970 link_force_try, /* Try Forced link speed */ 971 link_force_ret, /* Forced mode worked, retrying autoneg */ 972 link_force_ok, /* Stay in forced mode */ 973 link_up /* Link is up */ 974 }; 975 976 struct gem { 977 void __iomem *regs; 978 int rx_new, rx_old; 979 int tx_new, tx_old; 980 981 unsigned int has_wol : 1; /* chip supports wake-on-lan */ 982 unsigned int asleep_wol : 1; /* was asleep with WOL enabled */ 983 984 int cell_enabled; 985 u32 msg_enable; 986 u32 status; 987 988 struct napi_struct napi; 989 990 int tx_fifo_sz; 991 int rx_fifo_sz; 992 int rx_pause_off; 993 int rx_pause_on; 994 int rx_buf_sz; 995 u64 pause_entered; 996 u16 pause_last_time_recvd; 997 u32 mac_rx_cfg; 998 u32 swrst_base; 999 1000 int want_autoneg; 1001 int last_forced_speed; 1002 enum link_state lstate; 1003 struct timer_list link_timer; 1004 int timer_ticks; 1005 int wake_on_lan; 1006 struct work_struct reset_task; 1007 volatile int reset_task_pending; 1008 1009 enum gem_phy_type phy_type; 1010 struct mii_phy phy_mii; 1011 int mii_phy_addr; 1012 1013 struct gem_init_block *init_block; 1014 struct sk_buff *rx_skbs[RX_RING_SIZE]; 1015 struct sk_buff *tx_skbs[TX_RING_SIZE]; 1016 dma_addr_t gblock_dvma; 1017 1018 struct pci_dev *pdev; 1019 struct net_device *dev; 1020 #if defined(CONFIG_PPC_PMAC) || defined(CONFIG_SPARC) 1021 struct device_node *of_node; 1022 #endif 1023 }; 1024 1025 #define found_mii_phy(gp) ((gp->phy_type == phy_mii_mdio0 || gp->phy_type == phy_mii_mdio1) && \ 1026 gp->phy_mii.def && gp->phy_mii.def->ops) 1027 1028 #endif /* _SUNGEM_H */ 1029
