| /Linux-v6.6/arch/arm64/boot/dts/renesas/ |
| D | hihope-rzg2-ex-lvds.dtsi | 11 pwms = <&pwm0 0 50000>;
41 pwm0_pins: pwm0 {
42 groups = "pwm0";
43 function = "pwm0";
47 &pwm0 {
|
| D | hihope-rzg2-ex.dtsi | 84 pwm0_pins: pwm0 {
85 groups = "pwm0";
86 function = "pwm0";
90 &pwm0 {
|
| /Linux-v6.6/arch/riscv/boot/dts/sifive/ |
| D | hifive-unleashed-a00.dts | 52 pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
60 pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
68 pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
76 pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
131 &pwm0 {
|
| D | hifive-unmatched-a00.dts | 54 pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
71 pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
77 pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
83 pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
274 &pwm0 {
|
| /Linux-v6.6/arch/arm/boot/dts/microchip/ |
| D | at91-kizboxmini-common.dtsi | 60 pwms = <&pwm0 2 10000000 0>;
68 pwms = <&pwm0 0 10000000 0>;
75 pwms = <&pwm0 1 10000000 0>;
93 &pwm0 {
|
| D | at91-kizbox2-common.dtsi | 64 pwms = <&pwm0 2 10000000 0>;
71 pwms = <&pwm0 1 10000000 0>;
78 pwms = <&pwm0 0 10000000 0>;
163 &pwm0 {
|
| D | at91-kizbox3_common.dtsi | 76 pwms = <&pwm0 0 10000000 0>;
84 pwms = <&pwm0 1 10000000 0>;
92 pwms = <&pwm0 2 10000000 0>;
99 pwms = <&pwm0 3 10000000 0>;
334 &pwm0 {
|
| D | at91sam9m10g45ek.dts | 158 pwm0 {
215 pwm0: pwm@fffb8000 { label
333 pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
340 pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
|
| D | at91sam9rlek.dts | 190 pwm0: pwm@fffc8000 { label
230 pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
236 pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
|
| D | at91-sam9x60_curiosity.dts | 379 pwm0 {
380 pinctrl_pwm0_0: pwm0-0 {
384 pinctrl_pwm0_1: pwm0-1 {
388 pinctrl_pwm0_2: pwm0-2 {
436 &pwm0 {
|
| D | at91sam9x25ek.dts | 31 &pwm0 {
|
| /Linux-v6.6/arch/arm64/boot/dts/rockchip/ |
| D | rk3326-anbernic-rg351m.dts | 17 pwms = <&pwm0 0 1000000 0>;
31 &pwm0 {
|
| D | rk3318-a95x-z2.dts | 120 pwms = <&pwm0 0 5000 1>;
239 pwm0 {
240 pwm0_pin_pull_up: pwm0-pin-pull-up {
274 &pwm0 {
|
| /Linux-v6.6/Documentation/devicetree/bindings/pwm/ |
| D | pxa-pwm.txt | 18 pwm0: pwm@40b00000 {
28 pwms = <&pwm0 5000000>;
|
| D | pwm-lp3943.txt | 9 - ti,pwm0 or ti,pwm1: Output pin number(s) for PWM channel 0 or 1.
32 ti,pwm0 = <8 9 10>;
|
| D | st,stmpe-pwm.txt | 15 pwm0: pwm {
|
| /Linux-v6.6/arch/arm/boot/dts/broadcom/ |
| D | bcm2835-common.dtsi | 165 pwm0_gpio12: pwm0-gpio12 {
169 pwm0_gpio18: pwm0-gpio18 {
173 pwm0_gpio40: pwm0-gpio40 {
|
| /Linux-v6.6/drivers/pinctrl/ |
| D | pinctrl-loongson2.c | 115 PMX_GROUP(pwm0, 0x0, 12),
130 SPECIFIC_GROUP(pwm0);
157 FUNCTION(pwm0),
|
| /Linux-v6.6/arch/arm/boot/dts/rockchip/ |
| D | rk3288-veyron-edp.dtsi | 50 pwms = <&pwm0 0 1000000 0>;
109 &pwm0 {
|
| D | rv1108-evb.dts | 60 pwms = <&pwm0 0 25000 0>;
184 &pwm0 {
|
| D | rk3288-firefly-beta.dts | 32 &pwm0 {
|
| /Linux-v6.6/arch/arm/boot/dts/intel/pxa/ |
| D | pxa300-raumfeld-controller.dts | 59 pwms = <&pwm0 10000>;
109 &pwm0 {
227 pwm0_pins: pwm0-pins {
|
| /Linux-v6.6/drivers/pinctrl/qcom/ |
| D | pinctrl-ipq5332.c | 716 MSM_PIN_FUNCTION(pwm0),
798 …PINGROUP(43, pcie2_clk, wci_txd, wci_rxd, blsp2_i2c0, pwm0, audio_pri1, audio_pri1, _, gcc_plltest…
799 PINGROUP(44, pwm0, _, gcc_tlmm, qdss_tracectl_b, _, wsi_data3, _, _, _),
800 PINGROUP(45, pcie2_wake, wci_txd, wci_rxd, blsp2_i2c0, rx1, pwm0, audio_sec1, audio_sec1, _),
801 PINGROUP(46, pcie1_clk, atest_char, pwm0, _, qdss_cti_trig_out_b0, _, _, _, _),
|
| D | pinctrl-ipq8074.c | 876 MSM_PIN_FUNCTION(pwm0),
938 PINGROUP(18, led0, pwm0, qdss_tracedata_b, NA, NA, NA, NA, NA, NA),
941 PINGROUP(21, pwm0, blsp4_uart1, blsp4_i2c1, blsp4_spi1, wci2d, mac1_sa1,
949 PINGROUP(25, audio_txmclk, pwm0, NA, qdss_tracedata_b, NA, NA, NA, NA,
957 PINGROUP(29, audio_rxmclk, pwm0, atest_char0, NA, qdss_tracedata_b,
1009 PINGROUP(63, sd_card, pwm0, NA, gcc_plltest, NA, NA, NA, NA, NA),
|
| /Linux-v6.6/arch/arm/mach-ep93xx/ |
| D | platform.h | 30 void ep93xx_register_pwm(int pwm0, int pwm1);
|
