/Linux-v6.6/drivers/memory/tegra/ |
D | tegra210-emc-table.c | 38 if (emc->nominal) { in tegra210_emc_table_device_init() 49 emc->nominal = timings; in tegra210_emc_table_device_init() 65 if ((emc->nominal && timings != emc->nominal) && in tegra210_emc_table_device_release()
|
D | tegra210-emc-core.c | 788 timings = emc->nominal; in tegra210_emc_set_refresh() 1863 if (emc->nominal) { in tegra210_emc_probe() 1864 err = tegra210_emc_validate_timings(emc, emc->nominal, in tegra210_emc_probe() 1878 emc->timings = emc->nominal; in tegra210_emc_probe()
|
/Linux-v6.6/Documentation/hwmon/ |
D | smsc47m192.rst | 44 Voltages are scaled such that the nominal voltage corresponds to 46 each voltage channel is 0V ... 255/192*(nominal voltage), the resolution 47 is 1 bit per (nominal voltage)/192. 68 in1_input CPU voltage input (nominal 2.25V) 72 in5_input Vcc voltage input (nominal 3.3V)
|
D | max6620.rst | 35 fan[1-4]_div rw Sets the nominal RPM range of the fan. Valid values
|
D | dell-smm-hwmon.rst | 263 ``0x04a3`` Get nominal fan speed Returns the nominal RPM in each fan state: 268 - 1st word in ``eax`` holds the nominal 318 but in case of the "magic" state, the nominal RPM reported for this state is a
|
D | adm9240.rst | 147 nr label nominal maximum resolution 158 The reading is an unsigned 8-bit value, nominal voltage measurement is
|
/Linux-v6.6/drivers/cpufreq/ |
D | powernv-cpufreq.c | 159 unsigned int nominal; member 187 return powernv_freqs[powernv_pstate_info.nominal].driver_data; in idx_to_pstate() 213 return powernv_pstate_info.nominal; in pstate_to_idx() 337 powernv_pstate_info.nominal = i; in init_powernv_pstates() 367 pstate_id, idx_to_pstate(powernv_pstate_info.nominal)); in pstate_id_to_freq() 368 i = powernv_pstate_info.nominal; in pstate_id_to_freq() 382 powernv_freqs[powernv_pstate_info.nominal].frequency); in cpuinfo_nominal_freq_show() 552 return powernv_pstate_info.nominal; in get_nominal_index() 573 if (pmsr_pmax_idx > powernv_pstate_info.nominal) { in powernv_cpufreq_throttle_check() 576 idx_to_pstate(powernv_pstate_info.nominal)); in powernv_cpufreq_throttle_check()
|
D | pcc-cpufreq.c | 88 u32 nominal; member 175 curr_freq = (((ioread32(&pcch_hdr->nominal) * (output_buffer & 0xff)) in pcc_get_freq() 222 / (ioread32(&pcch_hdr->nominal) * 1000)) << 8); in pcc_cpufreq_target() 476 ioread32(&pcch_hdr->nominal), in pcc_cpufreq_evaluate() 528 ioread32(&pcch_hdr->nominal)); in pcc_cpufreq_evaluate() 555 ioread32(&pcch_hdr->nominal) * 1000; in pcc_cpufreq_cpu_init()
|
/Linux-v6.6/drivers/net/wireless/ath/ath9k/ |
D | ar9002_phy.c | 359 ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9285_2GHZ; in ar9002_hw_set_nf_limits() 363 ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9287_2GHZ; in ar9002_hw_set_nf_limits() 367 ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9271_2GHZ; in ar9002_hw_set_nf_limits() 371 ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9280_2GHZ; in ar9002_hw_set_nf_limits() 374 ah->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_9280_5GHZ; in ar9002_hw_set_nf_limits()
|
D | calib.c | 69 return ath9k_hw_get_nf_limits(ah, chan)->nominal; in ath9k_hw_get_default_nf() 253 s16 default_nf = ath9k_hw_get_nf_limits(ah, chan)->nominal; in ath9k_hw_loadnf() 399 nf[i] = limit->nominal; in ath9k_hw_nf_sanitize()
|
D | ar9003_phy.c | 1371 ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9300_2GHZ; in ar9003_hw_set_nf_limits() 1374 ah->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_9300_5GHZ; in ar9003_hw_set_nf_limits() 1377 ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9330_2GHZ; in ar9003_hw_set_nf_limits() 1381 ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9462_2GHZ; in ar9003_hw_set_nf_limits() 1383 ah->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_9462_5GHZ; in ar9003_hw_set_nf_limits()
|
/Linux-v6.6/drivers/staging/media/imx/ |
D | imx-media-fim.c | 65 unsigned long nominal; /* usec */ member 85 fim->nominal = DIV_ROUND_CLOSEST_ULL(1000000ULL * (u64)fi->numerator, in update_fim_nominal() 88 dev_dbg(fim->sd->dev, "FI=%lu usec\n", fim->nominal); in update_fim_nominal() 158 error = abs(interval - NSEC_PER_USEC * (u64)fim->nominal); in frame_interval_monitor()
|
/Linux-v6.6/Documentation/userspace-api/media/v4l/ |
D | ext-ctrls-colorimetry.rst | 25 The Content Light Level defines upper bounds for the nominal target 88 - Specifies the nominal maximum display luminance of the mastering 92 - specifies the nominal minimum display luminance of the mastering
|
D | streaming-par.rst | 14 The current video standard determines a nominal number of frames per
|
D | func-read.rst | 65 reading, or the capture rate must fall below the nominal frame rate of 79 nominal frame rate. An example of this model is the video read mode of
|
D | vidioc-g-parm.rst | 123 the video input) may reset this parameter to the nominal frame 183 the video output) may reset this parameter to the nominal frame
|
/Linux-v6.6/Documentation/devicetree/bindings/sound/ |
D | cs35l32.txt | 39 - cirrus,battery-recovery : Low battery nominal recovery threshold, rising VP. 45 - cirrus,battery-threshold : Low battery nominal threshold, falling VP.
|
/Linux-v6.6/tools/testing/selftests/cgroup/ |
D | memcg_protection.m | 16 % n vector nominal protection of siblings set at the given level (memory.low) 51 protected = min(n, c); % start with nominal
|
/Linux-v6.6/Documentation/userspace-api/media/drivers/ |
D | imx-uapi.rst | 42 intervals (elapsed time between two EOF's) drop below the nominal 67 the nominal frame interval reported by the sensor. This can reduce noise 72 If the averaged intervals fall outside nominal by this amount, in
|
/Linux-v6.6/Documentation/devicetree/bindings/regulator/ |
D | twl-regulator.txt | 62 - 0x08 - Sleep mode, the nominal output voltage is maintained with low power 64 - 0x0e - Active mode, the regulator can deliver its nominal output voltage
|
/Linux-v6.6/Documentation/devicetree/bindings/phy/ |
D | apm-xgene-phy.txt | 23 data earlier than the nominal sampling point. 1 means 24 sample data later than the nominal sampling point.
|
/Linux-v6.6/drivers/net/can/peak_canfd/ |
D | Kconfig | 9 CAN-FD access to the CAN bus. Besides the nominal bitrate of up to
|
/Linux-v6.6/Documentation/admin-guide/pm/ |
D | amd-pstate.rst | 108 able to sustain their nominal performance state simultaneously. 148 a relative number. This can be expressed as percentage of nominal 149 performance (infrastructure max). Below the nominal sustained performance 151 processor subject to hardware. Above the nominal performance level, 152 the processor must provide at least nominal performance requested and go higher 339 performance scale as a relative number. This can be expressed as percentage of nominal 340 performance (infrastructure max). Below the nominal sustained performance level, 342 to the Performance Reduction Tolerance register. Above the nominal performance level, 343 processor must provide at least nominal performance requested and go higher if current
|
D | cpufreq_drivers.rst | 170 a percentage of the nominal (ie: maximum) CPU frequency. The output buffer 245 nominal frequency from the BIOS, sometimes, the values displayed by 251 In this example, the nominal frequency is 2933 MHz. The driver obtains the 252 current frequency, cpuinfo_cur_freq, as 54% of the nominal frequency:
|
/Linux-v6.6/drivers/net/can/ctucanfd/ |
D | ctucanfd_base.c | 205 static int ctucan_set_btr(struct net_device *ndev, struct can_bittiming *bt, bool nominal) in ctucan_set_btr() argument 218 if (nominal) in ctucan_set_btr() 233 if (nominal) { in ctucan_set_btr()
|